Пікірлер
@hernans.robaldo6087 3 күн бұрын
That is a fantástic outdoor kitchen, congratulations
@vandelayindustries5814 4 күн бұрын
Really nice video I would consider double layering the playing surface foam, depending on how the single layer holds up over time.
@skiperoni1246 6 күн бұрын
Anyone know where to get 1/4" Closed cell foam in the right size in Canada? I cant find it anywhere thats large enough
@siavash1523 19 күн бұрын
That was impressive. great idea. the cupholders under the table was a cool idea.
@letsdiy2gether239 15 күн бұрын
Everybody loves them! Out of the way when not needed and the beer bottles don;t interfere with play! thanks for watching
@hugopreston7118 Ай бұрын
Did you enclose the grill cutout? Or just leave it open to the cabinet?
@letsdiy2gether239 15 күн бұрын
I left it open to the cabinet. Thanks for watching
@TheChubbrock169 Ай бұрын
Where do you get those cup holders at
@letsdiy2gether239 15 күн бұрын
They are actually made for boats. A few sites had them, but the best price was at Aliexpress, here: www.aliexpress.us/item/3256803252766487.html?spm=a2g0o.ppclist.product.38.1013iRakiRakVe&pdp_npi=2%40dis%21USD%21US%20%2417.30%21US%20%2413.15%21%21%21%21%21%402101ea7116827836471328167ed2e8%2112000027006456445%21btf&_t=pvid%3A5089f09b-49c3-4da7-b965-51bfbee955e5&afTraceInfo=1005003439081239__pc__pcBridgePPC__xxxxxx__1682783647&gatewayAdapt=glo2usa Thanks for watching
@peace-is-happy7046 Ай бұрын
Looks Awesome, great job 👍👏
@letsdiy2gether239 15 күн бұрын
thanks for watching
@SunnyP-if9bw Ай бұрын
great video . how's it holding up after 2 years? any issues or anything you would do different? thank you
@letsdiy2gether239 Ай бұрын
It is still amazing! No sagging, the cabinets look new and i am very happy!
@CaseyFahey Ай бұрын
This is the video i needed, thank you!
@letsdiy2gether239 Ай бұрын
You're so welcome!
@i-seanneill7051 2 ай бұрын
Great work bro. You gave me ideas to start my own
@letsdiy2gether239 Ай бұрын
Thanks for watching!
@dhruvgupta498 2 ай бұрын
what size screws did you use on the 1/2 plywood for the hinges/legs?
@letsdiy2gether239 Ай бұрын
Hi. I used 1 1/4" screws. Thanks for watching
@dhruvgupta498 Ай бұрын
In the 1/2" plywood?
@letsdiy2gether239 Ай бұрын
misread, i think i used 1/4" screws
@milansobocz8684 2 ай бұрын
Thanks now i have got the idea how to make my own ☺️
@letsdiy2gether239 Ай бұрын
Nice! Thanks for checking out my video
@marigailcooper8925 2 ай бұрын
Where did you get your foam from?
@letsdiy2gether239 Ай бұрын
I bought everything from www.Casinosupply.com. Thanks!
@irvingcastillo3826 2 ай бұрын
good afternoon what are the dimensions of the table
@letsdiy2gether239 Ай бұрын
It's about 8.5ft X 4.5ft. I have 10 players fit very comfortably.
@briandohertyondrums 3 ай бұрын
Great video! I’m gonna try to make one myself. Thank you!
@letsdiy2gether239 Ай бұрын
That's great. Good luck!
@PRESA25 3 ай бұрын
Did you do a cost comparison of building this set up vs pre made outdoor composit cabinets.? Of course that’s a different modern look just curious. Your ability in building far exceeds mine. Looks great!
@letsdiy2gether239 Ай бұрын
I didn't do those comparisons. But i did compare the pre-made outdoor kitchen sets vs. doing it my self from scratch. It was way cheaper to do it myself from scratch. They charge a huge premium for the pre built, do-it-yourself kits.
@carmelalinardi6863 3 ай бұрын
You saved me some $$ in repairs. :)
@letsdiy2gether239 Ай бұрын
Great! Thanks
@sfootball9487 3 ай бұрын
Wow, so easy! Thanks for posting
@letsdiy2gether239 Ай бұрын
Good luck! Thanks for watching
@joefasulo1205 3 ай бұрын
life saver!
@letsdiy2gether239 Ай бұрын
Excellent!
@lizalevin9528 3 ай бұрын
Have you been happy the quality and durability of the bbq guys signature series units?
@letsdiy2gether239 Ай бұрын
I love it. All of these years later, the cabinets still look brand new. They are very durable and I have no complaints!
@CardinalProperties-hy7tw 4 ай бұрын
I’m looking into outdoor kitchen drawers/doors and wondering how the BBQ Guys ones have held up after 2 years of use. Any issues?
@letsdiy2gether239 Ай бұрын
Absolutely no issues. They still look almost brand new. They were definitely a good buy. I included a link in my description
@manuelsilva6042 4 ай бұрын
Boa tarde,onde posso comprar essas luzes?
@letsdiy2gether239 Ай бұрын
GardenCoin was the brand i used, but not sure if they are still around. These are very similar to the ones i bought...basically i got 7 inch, low-voltage, 1.5 watt outdoor lights. here is a link www.amazon.com/LEONLITE-Hardscape-Voltage-Waterproof-Lifespan/dp/B088R3YPL7/ref=sr_1_1_sspa?
@Vuhltz 4 ай бұрын
Any one have a link for the cupholder???
@letsdiy2gether239 Ай бұрын
Hi, I had a hard time finding them. They are actually made for boats. A few sites had them, but the best price was at Aliexpress, here: www.aliexpress.us/item/3256803252766487.html?spm=a2g0o.ppclist.product.38.1013iRakiRakVe&pdp_npi=2%40dis%21USD%21US%20%2417.30%21US%20%2413.15%21%21%21%21%21%402101ea7116827836471328167ed2e8%2112000027006456445%21btf&_t=pvid%3A5089f09b-49c3-4da7-b965-51bfbee955e5&afTraceInfo=1005003439081239__pc__pcBridgePPC__xxxxxx__1682783647&gatewayAdapt=glo2usa Thanks for watching
@nxlevelautodetailing7661 4 ай бұрын
Wow! Came out amazing🫡I’m going to try do it my self Thank you for video
@letsdiy2gether239 Ай бұрын
Great! Good luck
@nxlevelautodetailing7661 4 ай бұрын
Thank you ! Very informative video
@letsdiy2gether239 Ай бұрын
Glad it was helpful!
@richardpatton4197 4 ай бұрын
Very nice build! Can you provide a link to the led light and transformer you purchased?
@letsdiy2gether239 Ай бұрын
GardenCoin was the brand i used, but not sure if they are still around. These are very similar to the ones i bought...basically i got 7 inch, low-voltage, 1.5 watt outdoor lights. here is a link www.amazon.com/LEONLITE-Hardscape-Voltage-Waterproof-Lifespan/dp/B088R3YPL7/ref=sr_1_1_sspa?
@DamienReid-yn3pn 5 ай бұрын
how does the table hold people’s weight if they’re leaning on it? and bridging?
@letsdiy2gether239 Ай бұрын
No bridging. The legs i took from the other folding table hold up pretty well. Thanks for watching
@jayskinny2049 5 ай бұрын
Future reference, if you ever need to cut cement board again, or drywall gor that matter. All you need is a new blade on a good utility knife. Put your t square across the board and score it 2 or 3 times with the knife. Push in on the back side of the cut while pulling back on the top of board. Snaps off like magic ❤
@letsdiy2gether239 Ай бұрын
thanks for tip
@SquirtleTrainer95 5 ай бұрын
How much did you end up investing on this
@letsdiy2gether239 Ай бұрын
It was about $380
@TheChubbrock169 Ай бұрын
Where did you get those legs @@letsdiy2gether239
@DavidWHardy 6 ай бұрын
A “two way switch“???
@travisoneal586 6 ай бұрын
How high were the countertops?
@letsdiy2gether239 Ай бұрын
They are 3ft off the ground. thanks
@RomanEmpire16 6 ай бұрын
Man you are a good carpenter this talbe is beautiful great job! 👍 i like how you broke it dwn in steps
@letsdiy2gether239 6 ай бұрын
Thanks 👍
@nick8340 6 ай бұрын
Any reason other than height u used 3/4 in for the other plywood? Planning on doing this but want to save on the weight issue.
@letsdiy2gether239 6 ай бұрын
I did use 3/4 to give a little bit more height, but I also felt the 3/4 would add a bit more rigidity to the 1/2 playing surface. Thanks for watching
@nick8340 5 ай бұрын
We(recently retired poker pals) finished our table using only 1/2 in ply and no legs as we are using a standard folding table as a base reasoning that pretty much everyone has one around. Our game travels every month so we needed something lightweight and your plans fit the bill. Thanks again for posting.
@nathanbenavidez1754 6 ай бұрын
Gotta link on those cup holders?
@letsdiy2gether239 6 ай бұрын
They are actually made for cars and boats. A few sites had them, but the best price was at Aliexpress, here: www.aliexpress.us/item/3256803252766487.html?spm=a2g0o.ppclist.product.38.1013iRakiRakVe&pdp_npi=2%40dis%21USD%21US%20%2417.30%21US%20%2413.15%21%21%21%21%21%402101ea7116827836471328167ed2e8%2112000027006456445%21btf&_t=pvid%3A5089f09b-49c3-4da7-b965-51bfbee955e5&afTraceInfo=1005003439081239__pc__pcBridgePPC__xxxxxx__1682783647&gatewayAdapt=glo2usa Thanks for watching
@nephrobles9790 6 ай бұрын
This table is perfect! Love the stow away cup holders! Where did you buy those?
@letsdiy2gether239 6 ай бұрын
Hi, I had a hard time finding them. They are actually mad for cars and boats. A few sites had them, but the best price was at Aliexpress, here: www.aliexpress.us/item/3256803252766487.html?spm=a2g0o.ppclist.product.38.1013iRakiRakVe&pdp_npi=2%40dis%21USD%21US%20%2417.30%21US%20%2413.15%21%21%21%21%21%402101ea7116827836471328167ed2e8%2112000027006456445%21btf&_t=pvid%3A5089f09b-49c3-4da7-b965-51bfbee955e5&afTraceInfo=1005003439081239__pc__pcBridgePPC__xxxxxx__1682783647&gatewayAdapt=glo2usa Thanks for watching
@1mIz 6 ай бұрын
Super cool. Im looking into making one like this. Do you have any links for the things that you used?
@letsdiy2gether239 6 ай бұрын
I bought everything at casinosupply.com. I included the items in the description. Thanks for watching
@kyleperry3530 6 ай бұрын
What do you estimate this cost you to make?
@letsdiy2gether239 6 ай бұрын
Materials, appliances, cabinets, grill, lights, stone and granite counter totaled a little over $12K. Roughly broke out as: Granite $3K, Kitchen cabinets/grill/fridge $7K, Materials $1K, Stone $900, Lights $120. Good luck! Thanks for watching
@organogold8 7 ай бұрын
Wow thank you so much for sharing this content 😊 Awesome table!!
@letsdiy2gether239 7 ай бұрын
thanks!
@soulstice99 7 ай бұрын
Nice hammer
@letsdiy2gether239 Ай бұрын
Thanks 👍
@craziqueen1256 7 ай бұрын
can I buy that table ?
@letsdiy2gether239 7 ай бұрын
Lol. I'm having too much fun playing cards with the boys! Thanks for the offer
@vrijheidstrijder 8 ай бұрын
what is the price? if i want you to make one for me?
@letsdiy2gether239 7 ай бұрын
Appreciate the complement! thanks for watching
@ayxmvc1059 8 ай бұрын
Great video sir, what was the total cost of this project?
@letsdiy2gether239 7 ай бұрын
The materials were about $400. thanks for watching
@dhruvgupta498 10 ай бұрын
How about using mdf to make it even lighter? Also if i wanted to have a high railing or put some LED lighting, can you suggest any changes in the steps?
@letsdiy2gether239 7 ай бұрын
Hi, yea if you wanted to add LED lights and a high railing, you would need an in-between step before you add the rails. In the in-between step you would build out the high rail. In my opinion, putting a high-rail on a foldable table might cause issues. Not sure how strong the MDF would be, I'd be concerned about sagging. Good luck!
@xSnakeEyes86 7 ай бұрын
MDF is heaver than plywood. If you added a raised rail you wouldn't be able to fold the table the same way, if at all.
@rdsocal28 10 ай бұрын
Very beautiful my guy. With all that space maybe a griddle to complete the kitchen would’ve been awesome
@letsdiy2gether239 10 ай бұрын
Definitely add whatever you need for your entertainment purposes! I thought about adding a pizza oven too. thanks for watching
@dc5duben96 10 ай бұрын
great work bro thanks for the video, helps me plan mine
@letsdiy2gether239 Ай бұрын
excellent
@malocrane75 10 ай бұрын
Nice work! Can you please give some details about the folding mechanism? Do you have a link?
@letsdiy2gether239 10 ай бұрын
I used the folding mechanism from an old poker table i had bought several years ago. So i don't have a link to share. thanks for watching!
@estrangeibanez3051 10 ай бұрын
Damn that looked great!🍻
@letsdiy2gether239 Ай бұрын
Thanks for watching
@mikegalick112 10 ай бұрын
Thanks for the video! Did your rock touch the patio or did you leave space? Also did the heads to the screws cause a problem for the granite install? Won’t those screw heads cause pressure points?
@letsdiy2gether239 10 ай бұрын
Hi, i laid the rock on top of the patio, didn't leave space. I had not issues with the screws and the granite. Thanks for watching
@joshuafox1574 10 ай бұрын
Awesome! Where did you get your outlet boxes that are adjustable in and out and what are they called? And what covers did you end up putting on them?
@letsdiy2gether239 10 ай бұрын
Hi, i got the adjutable boxes at home depot. thanks for watching!
@BrewskyAZ 11 ай бұрын
Where did you get the felt and foam? Basically, can you provide a parts list with links? Thanks!! Well done!!
@letsdiy2gether239 10 ай бұрын
Hi, i bought everything at Casinosupply.com. Here's the list Modena Poker Table Rail Vinyl (9ft), Poker Table Rail Foam Sheet 70 Pound 1" x 54" x 105" (1pc), Volara Poker Table Foam Padding (1 10ft piece), Pro Two-Tone Suited Speed Cloth - (Sold Per Running Foot) Red (9ft). Thanks for watching
@BrewskyAZ 10 ай бұрын
@@letsdiy2gether239 thank you!