why would you not wana mow your lawn are you that lazy ? liking those grab handles and muffin rings, have a hard time seeing you budy? giving up your last mandatory excersize?
@NangOuchacambodia2 күн бұрын
The problem is with crazy recording function
@darkosariclukendic70642 күн бұрын
Hello. Do you have experienced any problem with installing Add-on on this type of HAOS installation, because I have? Virtually, no matter what I do, a finish with message: "AddonManager.install blocked from execution, no host Internet connection". My system is installed like you suggest in this video on HP EliteDesk 800 G2 Mini with i5, yesterday, so it is up-to-date version. Then I found this commands: ha su repair ha core rebuild ha host reboot tha help me to instal one. Only one Add-on (Advanced SSH & Web Terminal) and after that, above message was back, now stay there, no matter what I done, including above commands, so, the problem is not with network or Internet, because this was not changed at all during this attempts in any aspect. Do you have any idea what I can do to solve this problem?
@ThisSmartHouseКүн бұрын
It sounds like one of the docker containers cannot communicate with your network properly. Have you upgraded to the latest version of supervisor and home assistant?
@Capozzi32 күн бұрын
Hello i have a problem, the tuya doesnt detect any devices therefore i have tu add it manually but i dont know the devices ip adress (Host) :/ where i can find it?
@tanookimarketing2 күн бұрын
Disappointing that you didn't cover the issues with this device as there's multiple. Calls into question your honesty and integrity when almost every other reviewer did so.
@muhdihsan932 күн бұрын
yup, compared to other reviewer that aqara sponsored, this guy seems to be hiding the issue
@ThisSmartHouse2 күн бұрын
What issues? I did the review 100% off my observations. The only problems I ran into I called out (Matter pairing).
@Bigglare3 күн бұрын
Too bad they didn't open the M3 to Third Party Zigbee devices...
@bernardosantos81443 күн бұрын
I'm using the Xiaomi Miot Auto integration. Will this still work?
@CarlRyds3 күн бұрын
It would be if the ZigBee radio supported third party devices. I emailed Aqara and they said they have no plans to support third party Zigbee devices. Very disappointing.
@ThisSmartHouse3 күн бұрын
I have no idea why they wouldn't support it. That is my three majority of my Zigbee devices are on Zigbee2MQTT. I just keep my newer Aqara devices on the M3.
@Bigglare3 күн бұрын
@@ThisSmartHouse I have all my Zigbee lights on a Hue Bridge with Matter, and all my other Devices on Third Reality's Smart Bridge MZ1. The Proprietary Zigbee is enough to say No to this latest version. Local automation is already possible with Apple Home and Home Assistant.
@CarlRyds2 күн бұрын
@@ThisSmartHouse I wanted the M3 to be my one and only super hub for everything, it’s a shame because I know it can be done, they’re just choosing not to.
@ThisSmartHouse2 күн бұрын
@Bigglare Agreeed. But not everyone is ready to jump to Home Assistant.
@BigglareКүн бұрын
@@ThisSmartHouse Its a good thing for matter. Anyone can start with a proper non proprietary bridge like, Hue, third reality, ikea, and use Alexa, google, or apple home for local control, automation and voice assistants.
@Fr3ubel3 күн бұрын
To bad reolink doesn't play well with blueiris.
@Nosjamesmenzer3 күн бұрын
So I an wondering how hard Is it to get the m3 hub IR blaster to work with home assistant Like being able to control IR devices through the hub using home assistant
@ThisSmartHouse3 күн бұрын
MAKE SURE TO GRAB THE FATHER'S DAY DEALS!!! Use promo code: USFATHDA (for extra 10% OFF from 6.10 until 6.16) - Aqara Smart Hub M3: amzn.to/3RnmHyC - Aqara Smart Lock U50: amzn.to/45jiBgT Use promo code: USCAFDPM (for extra 5% OFF from 6.10 until 6.16) - Aqara Presence Sensor FP2: amzn.to/4chTrkR
@HughD3 күн бұрын
Nice job covering this. I appreciate the work by you and Aqara. I have the M3 and am looking forward to seeing more videos covering using Matter devices with the M3 and the other way around, plus examples of local automations. In other words, I'd like to see more of the advanced features actually working. Thanks again...
@ThisSmartHouse3 күн бұрын
Thanks! I wish I could have gotten any 3rd party Matter device to work with my M3 to test with.
@jamesepp38543 күн бұрын
Would these lights work without a home bridge?
@ThisSmartHouse3 күн бұрын
Yes, you can control everything via the Govee Home app (via Bluetooth or WiFi). Nothing else required!
@HenryShaw274 күн бұрын
Does the round circle ringing button light up when records motion detection or only if pressed? Is there option to turn off the light and only have it light up if pressed? Thanks
@illuminatedgalaxies7777.4 күн бұрын
We love ours ❤
@mrxmry32644 күн бұрын
this thing has a lot of features that i simply don't need. if i ever need an outdoor light, i'll go for something more cost-effective.
@ThisSmartHouse3 күн бұрын
You can always just purchase a smart bulb for an existing fixture. But it doesn't look as cool.
@Caroline-hv7jz4 күн бұрын
This lock looks really great and can solve the annoyance of forgetting my keys.😃
@ThisSmartHouse3 күн бұрын
It is a great solution if you want to leave your existing outside lock in place!
@Caroline-hv7jz4 күн бұрын
Can you test some smart plugs? They would be accommodating for transforming a home into a smart one.
@ThisSmartHouse3 күн бұрын
I've covered a few smart plugs in the past. What systems do you have and I could probably make a recommendation.
@Caroline-hv7jz3 күн бұрын
@@ThisSmartHouse, I just watched your video review of the SwitchBot Mini plug, and I must say that your thorough analysis of its features was really impressive! Your content is top-notch! I've sent you an email with more information about our products. Please take a look when you can - I would love to explore a potential collaboration with you!🥰
@Caroline-hv7jz4 күн бұрын
This vacuum cleaner is really good, I have one at home too.
@limpfinger124 күн бұрын
Just an FYI those push connectors are not rated for outdoor use
@ThisSmartHouse3 күн бұрын
That is correct, but I don't believe this is considered a "wet" location as long as you have proper gaskets or sealant. The wire nuts that are included with the light or the ones my builder are also not outdoor rated. Those have to have the "goop" in them. But good call out!
@limpfinger124 күн бұрын
Waiting for mine to come. Can't wait
@ThisSmartHouse3 күн бұрын
They are really fun. You can make some really cool effects. If you have other Govee Outdoor lights it just makes sense.
@jcm96984 күн бұрын
Nice review! I bought these for my friend, and he LOVES them!!!
@ThisSmartHouse3 күн бұрын
Awesome! They are a lot of fun!
@stumpmason244 күн бұрын
Great review..I've got a bunch of Govee products and was thinking of getting these. Wondering if you could answer a question. I want to use these to replace two exterior door lights. If I was to set them at a white color/brightness setting in the app, then turn them off using the inside wall switch will they turn back on at the same setting? We use the switch on the wall alot this location. Thanks for any help and keep up the good work!
@ThisSmartHouse4 күн бұрын
Great question. And I believe I skipped over it in the review. There's an option for power on function. So you can define exactly what happens when the device loses power and its reapplied. You can set it to a specific effect, resume the last effect, or just stay off.
@ThisSmartHouse4 күн бұрын
I have a similar setup with mine. I have three external lights and two of them are the govie. I just replaced the third with a smart bulb and I have a button inside I can use to trigger them all to turn on.
2024 still working. Thanks for your help and this method!
@aslamsean6 күн бұрын
What happens if camera goes out of range from WiFi or if camera is broken or stolen? Is the footage gone since it’s using onboard storage ?
@JeremyChaudet6 күн бұрын
How do the cameras stay charged? Does the Ethernet cable charge it? Are any batteries required?
@kiphenry886 күн бұрын
They're both just 2k. Must just decided since its 2560 that they could use 2.5K and technically wouldn't be lying.
@davidhorizon84017 күн бұрын
I was just posting about the glitches but decided to read the comments. Looks like others have it covered. It is weird that is it happening. I am wondering if you tried saving it with a different codec before uploading, if that would help?
@ThisSmartHouse7 күн бұрын
Yeah I'm not sure what happened. I've exported hundreds of KZfaq videos with the exact same settings but this one had problems. I think it ended up being a glitch on KZfaqs side
@2006deathdealer8 күн бұрын
Great video! I’m trying to integrate the J7 into HA. The few sets of instructions I’ve found are very complicated and require JS and Python. Please show us an easier way to retrieve its password and complete the integration.
@ThisSmartHouse7 күн бұрын
Are you using the built-in iRobot integration? It was really easy to set up.
@cszulu20008 күн бұрын
How many times can it charge before you need a new battery?
@cszulu20008 күн бұрын
Can you schedule a zone to only happen during the day? Think front of house near the street
@cszulu20008 күн бұрын
How easy is it to get parts? Any service techs trained?
@Greenfield1298 күн бұрын
Thanks for the awesome review. I have both v2 and v3, and your reviews are spot-on and fair. It is hard to beat Wyze's price and quality.
@theeaviatordreamer8 күн бұрын
Did you have any issues linking it to your account? Mine simply won’t link. I have tried connecting it to my WiFi, nothing.. I have tried connecting it via 4g lte, nothing.. any thoughts?
@joeld96639 күн бұрын
what about tuya zigbee devices? thank you
@dascalubogdanflorin9 күн бұрын
No cloud? Your key it is valid for 6 months.
@dudefromkeene10 күн бұрын
Thank you so much! I been needing to find a way to make This happen!
@SamBiggy13 күн бұрын
Did your dog jumped the fence hahahaha
@fobguy71414 күн бұрын
does this have tracking recording
@martindinicolino822714 күн бұрын
have you ever found an iOS solution?
@chrisnl679116 күн бұрын
This camera is total rubbish. Wyze need to review the software for this v4 .The SD card playback crashes after 10gb storage. No person detection. Go with the cam v3 pro or lorex or blink with free cloud storage.
@ThisSmartHouse15 күн бұрын
I don't have any issue with the 64 gig card in my 2x v4 cameras. You might want to try factory resetting them or contacting why support maybe you've got a bum one. As far as the person detection that is a disappointing loss from the V3 Pro. If you're looking for a local solution that has onboard person detection check out the reolink cameras.
@001looker16 күн бұрын
Ring Camera>Reolink China garbage.
@igotslickshoes16 күн бұрын
I am stuck - I have done all the SDK setup and I can send broadcasts - but how can I set up a voice automation in Home Assistant where I can say "Hey Google, I'm home" and it will turn on the lights I have configured in HA?
@ThisSmartHouse15 күн бұрын
That's sort of the opposite of what the SDK does. The point of the SDK is to be able to control lights and devices that are in Google Home but not controllable and home assistant. If you want to control lights that are in home assistant with Google Home then you can either do the nabu casa subscription for the easy way or you can manually set up Google Assistant in home assistant. I know that's confusing and they probably need to do a better job of differentiating them. But once you have your lights in home assistant exposed to Google Home then you can set up a routine in Google Home to respond to the I'm home phrase. Let me know if you need more clarification!
@igotslickshoes15 күн бұрын
@@ThisSmartHouse gotcha. I do have Nabu Casa - but does that mean I can't create an automation in HA (one that involves lights, maybe a switch or other device) and be able to trigger that automation with a phrase I say to Google. For example: when I say "Hey Google, trigger the alarm" - it see the alarm automation in HA that triggers my Ring camera alarms. That can't work like that?
@michellegillis801617 күн бұрын
Do you have to drill this to the door or a wall , I have a hearing problem , can't drill in the wall I live in the project.
@ThisSmartHouse17 күн бұрын
They recommend that you drill into the door. If you have any existing doorbell you might be able to replace it without having to make any new holes. You might be able to get away with using double-sided tape but that would introduce a security risk of it being stolen really easy.
@VanDerClof5918 күн бұрын
When first charging , is the light blue? Does light change color when done charging?
@ThisSmartHouse15 күн бұрын
I don't recall 100% but I think it either turns solid blue or the light turns off. It should be in the manual.
@johnm977518 күн бұрын
Is there any way to control a device in the Tuya App by Alexa as well?
@freespeech894719 күн бұрын
I am new to home assistant why is it better than homekit?
@ThisSmartHouse18 күн бұрын
It is open source so it works with almost everything. There is a giant community that supports it.
@mr.boniato640219 күн бұрын
For the price, would have been nice for the reso to be at least 4 MP.
@danithaman461019 күн бұрын
The duo 2 and the duo 3 don’t connect to the RLN8-410
@ThisSmartHouse19 күн бұрын
They sure can. I have mine set up (Duo 3). It works with both hardware revs I have of the RL8. Is your firmware up to date?
@danithaman461019 күн бұрын
@@ThisSmartHouse nothing happens when I connect them. It says it has the latest software too. Any ideas?
@ThisSmartHouse19 күн бұрын
Double check you have the latest by checking the downloads page: reolink.com/download-center/ Make sure you put in the right hardware version. I found the auto update isn't reliable.
@danithaman461019 күн бұрын
@@ThisSmartHouse yup, that was it!! Thank you!!
@ThisSmartHouse19 күн бұрын
Excellent! That got me too. Home Assistant will actually tell you if you need to update the firmware even if the NVR doesn't.
@SDRsTube77719 күн бұрын
can you turn the light feature ON/OFF or is it automatically going to turn on everytime it detects movement you made a comment that made me wonder this thanks
@ThisSmartHouse19 күн бұрын
Yes. You can control whether or not the camera will trigger the light on motion. Same thing applies to other Waze cameras.