the biggest problem I was having was that the center button for the scroll wheel would still work but would not click so with the help of this video i was able to figure out how to fix the button. Thank You!!!!!! Edit: The reason the mouse skates came off without the glue is because there is a small gap that you can insert a pry tool into under the glue to take the skates off

I just cleaned my mouse, its a little nerve wrecking to pull the plastic body off the chassis, there's some creaking and snapping.

The mouse could have been made simpler over all.

I want this. Can I purchase one somewhere? I can think of several uses outside of an AC.

Thanks you so much 💕

thanks a lot bro❤

This is EXACTLY what I needed. Thank you so much!

I use a lot of CA glue, and this is very interesting.

Jesucristo te ama muchísimo, ARREPIÉNTETE de tus pecados y ten perdón de pecados en Su Nombre

I have this model and so good and usefully

Thanks 🙋‍♂️🌹

No screw in the new ones under battery. Upon further inspection, the screw is now a micro screw which is Logi's way of saying screw you.

Can someone please help me i bought my g502 3 years ago and it is giving me a problems . My left click isnt registring sometimes in a single click i have to multiple click

For how long you left the thumbsticks in the alcohol bag?

Thanks

mine keeps double clicking when I click just once, do you think it needs cleaning? or is this an issue with wear and tear?

Thanks so much for your tutorial! :) Sadly, I thought it was dirt but it's not, it's the scroll wheel plastic melting. I've got to admit the black gloves and silence made me feel like a serial killer was teaching me to clean my mouse 😆 Greetings from Argentina!

Ty I was be able to take down my mouse by looking at this guide

I have a g402 for about 7 months and from yesterday my mouse doesn’t turn on what should I do ?

Not really what I was interested in.

Fantastic video. Mine was full of grimey gunk.

Any idea where to find a replacement scroll wheel?

My Watch shows The Time. However not keeping. So, I had replaced the baterry. Thanks for this video.

7:00 Arghh does the new one still "sink" when you press on it? This was the reason I wanted to change the original one! Real question (before buying this new trackpad): what's the point in changing the clickpad to another clickpad that "sinks" when you do a mouse tap? @Purkkaviritys

Shit

oh thank god, a tutorial without an indian accent

The heck happenned to your thumb?

Thank you for this video! I have a G502 where the mouse wheel wasn't free spinning very well (would come to a stop shortly after flicking it). This video helped me take it apart enough to find lint/stuff wedged in the bottom of the clear plastic housing the mouse wheel sits in. Pried one side of it apart with a small screwdriver while carefully shoving a small strip of paper towel (cut with a scissors to size) soaked with isopropyl in there to grab it and pull it out. Now that thing spins like brand new AND the mouse still works! Tip: Use this video to identify where the screw holes are in the skates under the mouse. Use an X-acto knife or similar sharp (but small) blade to poke INTO the screw holes, then carefully cut the skate material away (in a circle) running the blade at a slight angle to the screw hole. You'll get access to the screws without having to remove the entire skate or needing to replace them. The missing skate material (small circles) over each screw hole shouldn't affect glide. At least I couldn't tell a difference when I was done. Oh, DO NOT stab into the center one in-line with the cord. Heh, I made that mistake watching this at first thinking there was a screw hole. Luckily I didn't cut into the mouse cord in there.

exactly what I needed. Straight to the point, no unnecessary talking. 100% helpful! :)

Thanks! Ur video was very usefull for me! (I changed the switches and the wire on my favorite mouse. (the cable braid was damaged) and cleaned it since I got in.)

Honestly if you bought it second hand I would have cleaned the outershell only. No need for taking it apart. But very comprehensive video. Great work.

I FIX THAT .FIRST TAKE PCB IN GAZOLIN 50MIN . TO WASH ALL GLUE SECOND USE GOOD FLUX AND GOOD SOLDRING IRON TO CONNEC ALL NAND PIN IF NAND IO ="INPUT OUTPUT DATA BUS IS BROCKED " CONTRLLER CANT READ DATA AND SHOW "2207 PRAM" USE CHIPGNUNE TO SEE NAND IS CORRECTLY SOLDR OR NOT EXAMPLE Controller Vendor: Phison Controller Part-Number: PS2251-07(PS2307) - F/W 01.02.10 [2013-09-27] Flash ID code: 8988244BA900 - Intel 29F64G08AAMF1 [MLC-8K] MY NAND IS INTEL . BUT KINGSTONE USE TOSHIBA TLC "98 3A 98 A3" TC58TEG7TLA20

Muchas gracias por el video, lo desarme y el alambre no sabía cómo poner pero por tu vídeo ya sé

BULLSHIT I DID ALL THAT AN USED WHITE LITHIUM GREASE TO RE GREASE THE RODS THE LASER SLIDES ON....FAKE ASS SHIT

This brings back memories of high school!

Terrible guide, I advise you not to follow the First steps as described. If you try to disconnect the longer contact first as shown in the video, the electrical contacs of the two side LEDs will certainly break because they are much shorter and more fragile. Which Is happened to me. Failed, it would be better to remove the video and redo it correctly.

Thankyou. Put some life back into my old girl. If your scroll wheel stops clicking you might want to flex that little metal wire so it sticks up into the ridges of the wheel more after cleaning. Worked a treat.

I would have just drilled slightly bigger holes to fit the pc screws in just wanna clean the chassis out afterward though

was gonna buy a new mouse and then i saw this video 🥺 saved me 70$

Thank you Purkka! My Rival 5 mouse wheel was giving me ghost down inputs when scrolling up and vice versa. Will follow this guide to clean it out. One more thing, where did you get that grey work mat? Can't find the exact one

If your going to clean your g502 I dont recommend re-using your original rubber skates and spending the 20 dollars for a glass pair off Amazon

Good video, Sadly I failed at removing the husk, didnt want to pry it even more in fear of breaking something. But I managed to clean the scroll wheel decently enough for it to spin smoothly again.

In my experience, how many controllers I've restored, fixed, cleaned, stick is way more easy trow in a garbage and put new one, especially on Sony controllers, cause their rubber became sticky and so dirty and you never will clean them to not be disgusting touch it. Thanks for the video and til for sixaxis sticks. I was first time today working with this controller, video helped alot.

you are a legend holy shit

I actually only had to clean the mouse wheel, as it was already rattling quite loudly. But thanks to your video, I simply cleaned the rest of the mouse as well. It was also necessary haha. 😂 Thanks for the video! 🙂

Lo de quitar y poner la goma deslizadora de arriba es una verdadera chapuza

👍👍

Fantastic video, straight to the point and super useful. Thank you!

Hell yeah! I decided to take apart my old keyboard and there is this 2 y old video right for me! Cheers!🎉

A lot of good work, but was it worth it?