If we don’t have the heating element do you have a suggestion for what we should/can use?
@andriunasd3 күн бұрын
ok so never use glass breaker with camera present, 250hest nesr the flash is melting the flash so its no good idea too and i hope u removed battery
@kearlcharles62115 күн бұрын
This board does not require programmer?
@pacboy2416 күн бұрын
This should only take “2 minutes!”
@tommiolavi16 күн бұрын
Whats that usb "convertor" connected to bench power supply? I need one!
@ferhatkurt889820 күн бұрын
Hi, What do you say about the lasers?
@user-cc1wl8pz2x26 күн бұрын
В такой ситуации надо разбирать телефон . там можно и замкнуть и спалить .
@spanishjohn420Ай бұрын
my torch not working now
@ElectroprozincАй бұрын
You need to replace it
@spanishjohn420Ай бұрын
@@Electroprozincdo I just need to replace the actual light part that came off? I can replace from the back?
@ElectroprozincАй бұрын
You need to replace the whole flex from inside it is better
@spanishjohn420Ай бұрын
Well that’s fucked
@PcutАй бұрын
Im still shocked that we allow apple to do this with us.. iphone 7 was the best matt black aluminum, i dont give a f about wireless charging u plug in cable and it charges wtf
@_FRANK_LINАй бұрын
Is there any chance to camera get damage or camera quality issue after excess heat in that area ?
@hanyassaf11 күн бұрын
Mine is a bit foggy at zoom from 1 to 3
@Electroprozinc11 күн бұрын
Yes it can get damaged from excess heat
@devinbusher3026Ай бұрын
Where did you buy the back glass? I am having trouble finding one with apple logo on it.
@aktech3271Ай бұрын
What is the air temperature in f and air speed and does it require using of the nozzle for the heat air gun
@user-jn8py4yj9gАй бұрын
Why change the processor and RAM? Why can't you just change the EMMC?
@ElectroprozincАй бұрын
It’s not an EMMC it’s a UFS. It’s encrypted and needs to processor to be transferred as well.
@avsamuelАй бұрын
RIP battery
@iggyscott1872 ай бұрын
What if the magnets ome up with back how to replace
@Electroprozinc2 ай бұрын
They are available for sale on mobilesentrix.com
@abgbomba27962 ай бұрын
What temperature and what speed blower you used to remove the ic sir?
@shelbyGT402 ай бұрын
Not for 1708
@Electroprozinc2 ай бұрын
Really? How so
@SJ-oxy2 ай бұрын
Yes, this is for a 1708 (base macbook).
@brandonlee15472 ай бұрын
I’ve loved you for 1000 years. I’ll love you for 1000 more.
@enryfrank3 ай бұрын
What about Tip to Ground Potential ? ....this is a big problem for the T3A T3B !!
Very detailed operation, thank you for sharing,if you are interested in repair tools, please contact me.
@Electroprozinc3 ай бұрын
we buy from you as well
@undroptik5 ай бұрын
Hi, Temperature please ?
@adeelanwar56905 ай бұрын
I followed all the steps and completed the glass but now my 13 pro max is getting really hot and turned off completely now. What could be the issue?
@davidnelson30265 ай бұрын
I dont recommend anyone doing this, simply will damage the phone. Using laser remover machine is the way to go if you run business.
@Toqhy5 ай бұрын
Guys got people who see that this thing is ez I would not recommend it to anyone I have worked on this alot I have experienced alot of issues with this which can sometimes destroy the motherboard I then used my friend laser machine if you guys want to start with something like use laser because this things sometimes will not work and if you have a 14 pro and its cracked and you destroyed the motherboard you will have alot of problems with the customers or your self I have lost 20 phones from this repair even I used air flow 40 with 180 c° it also brick the phone will not recommend this repair to anyone
@Electroprozinc5 ай бұрын
It is not possible to destroy the board with 40 air and 180c heat. You probably used the punch tool. Using the punch tool on top of the location of the board can break chipsets inside the bottom board. We have done thousands of phones using this method with zero issues. If you are a careful person, issues like the ones you mentioned can be minimized.
@RanInt5 ай бұрын
Are there any good 3rd party replacements?
@naidol5 ай бұрын
You can't blindly recommend the T3B ... It's a 96w station. Only supports C210 & C115 handles. The T3A is 200w and only supports C245. If you need both C245 and C210, you should look at the new T320 or the T420 models.
@ajnasaju85416 ай бұрын
what is the heat and air?
@Electroprozinc6 ай бұрын
250 60
@chadwickduhon50426 ай бұрын
Do they have available accessories for the rear voltage output? Or what can it support?
@raghavendramayya99026 ай бұрын
T3A is T245 tip and T3B is T210 small tips for SMD
@risingsun72976 ай бұрын
what a pain in the ass
@marxferrobonfim13546 ай бұрын
what temperature did you use?
@Electroprozinc6 ай бұрын
It should be in the video 250 heat 60 air
@nrette7 ай бұрын
Great video. I generally change the case and once I tried the glass only on a 11. That was a mess to glue the new one, I needed to put some elastics around the camera. Does the 14 pro max doesn't need that or you have a special glass?
@unknownperson37747 ай бұрын
Does the iphone have heating problems once the back glass is replaced?
@Electroprozinc7 ай бұрын
No it should not
@unknownperson37747 ай бұрын
@@Electroprozinc also will it still look genuine even if i replace with a aftermarket back glass? Thanks again
@Electroprozinc7 ай бұрын
Depending on the type of glass you use, it can look genuine yes.
@XtianApi7 ай бұрын
T3a now has the new holder. T3b is less than the half the power and for smaller stuff. So saying they are the same head unit is inaccurate. Plus, t3a can be ordered with the 345 pencil, which supports genuine jbc tips. It's the best choice for me and most people. Also, it's not copper, but brass for the cleaners. :) sorry to be that guy
@Electroprozinc7 ай бұрын
It is okay to be that guy. I admit I may not have had all the info when I was provided with it I was not aware of these differences. Thank you for clarifying that up.
@XtianApi7 ай бұрын
@@Electroprozinc no worries. I still enjoyed the video. Also it took me forever when I was buying one of these to figure out the differences. I had to scour forums. Thanks! P. S. Very cool reply, level headed
@robertbishop92295 ай бұрын
I'm trying to find the 345 sodering iron handle that you say supports JBC tips. Can you post a link please? Thanks in advance!