BYD in China is already producing sodium-ion batteries for their electric cars and Tesla is planning to use them in their $25,000 vehicle currently in design phase. Sodium-ion batteries should last about 10 times their lithium-ion counterparts. I worked in the battery industry for many years, and I completely agree with this Doctor's assessment. I believe that sodium-ion batteries will dominate the future of electric vehicles.
@BillyWu10 күн бұрын
Agreed. Sodium-ion batteries are likely to have a very important role in the future of electrification. Exciting times
Your way of explanation helps me to recall of what I studied from mechanical engineering.. especially your pronunciation easy to follow first non native English spoken person
@BillyWu14 күн бұрын
Thanks. Glad to hear it was helpful
@asedefp17517 күн бұрын
excellent
@BillyWu17 күн бұрын
Thanks
@thornhillplumbing19 күн бұрын
How did people find out about this? Or is it just a theory?
@BillyWu16 күн бұрын
Great question! Iron has been one of the most critical materials, defining an entire age, due to its good mechanical properties. Iron smelting itself has been around for a long time, but pure iron is perhaps too ductile to be useful for most industrial applications. Early smelters learnt, likely through trial and error, that the addition of carbon enhanced the mechanical properties to make steel. Later developments in material science, then allowed us to more systematically understand what was going on, with phase diagrams a useful way of mapping the composition-phase relationship towards engineering materials with the properties we are aiming for. It's quite a powerful approach which hopefully will inspire people to learn more about material science.
@asadullahhaider626726 күн бұрын
Thanks a lot! this video really cleared my concepts about the topic and in a very simple way.👍
@BillyWu26 күн бұрын
Glad it was useful
@dhadumia26 күн бұрын
NMC price lower than LFP and LFP installed cost at USD ~ $600/kWh looks very high.
@BillyWu26 күн бұрын
You're right. This video was from a few years ago and the source was a few years back before then. Much has changed since then with price drops a lot more rapid than many had expected
@fearmyshadow468529 күн бұрын
3:30 the minecraft iron ore clock killed me 💀💀💀💀
@Firetiger93Ай бұрын
Wonder if you could add a system like this to a boat and hook up additional solar panels and make your own hydrogen fuel?
@BillyWuАй бұрын
Fuel cell systems could certainly power boats. You could have a solar system also but would need to have an electrolyser to split the water to hydrogen and then compress it for storage which is a bit costly and complex at small scale. A battery system could be a simpler and more efficient way to collect solar; working alongside a fuel cell system
@Firetiger93Ай бұрын
@@BillyWu If I understand how fuel cells work then its comparable to a normal gas engine as far as power density but with hydrogen as fuel. If you have a solar/battery setup and the fuel cells as the backup you could effectively live off grid and never need to invest anything more than the initial cost of the whole system rather than having to rely on something like a diesel engine. I love the idea of only having to earn enough for repairs and food on a boat and this could be an option someday for making boat living a more viable option.
@user-xq8qx6bg2jАй бұрын
❤❤Thanks Billy, great presentation. 👍
@BillyWuАй бұрын
Thanks. Glad itnwas useful
@user-qx4jv2sh6mАй бұрын
Great system, I'd like to build one too.
@BillyWuАй бұрын
Thanks. The system is a few years old now so probably better components exist now. Previously it was quite expensive so getting the economics right was challenging for commercial via ability as a generator
@rysk6187Ай бұрын
Made so easy to understand the basics .. thank you sir😇🙏
@BillyWuАй бұрын
Thanks. Glad it was useful
@harnounezabatiАй бұрын
ACCORDING TO MY RESEARCH I noticed that in electrochemistry it is the migration of bonds which is at stake rather than that of ions, this is where the secret of the solid electrolyte lies
@ThiyagadhayalanАй бұрын
wonderful video!
@BillyWuАй бұрын
Thanks
@beimnetterefe7899Ай бұрын
do you select material before the geometric and force analysis ? i have always found it easier to calculate the maximum stress the part is subjected to and after that I would select material with factor of safety in mind?
@woutergАй бұрын
Hello, in the TTT-diagram, shouldn't the cooling lines be straight (temperature held stable) when entering the red pearlite part? Or is that not required? thanks!
@YXu-kw8meАй бұрын
like I am taking lecture hhh
@PravdaSeedАй бұрын
🔋 Thanks Billy
@PravdaSeedАй бұрын
🔋 Thanks Billy
@PravdaSeedАй бұрын
🔋 Thanks Billy
@PravdaSeedАй бұрын
🔋 Thanks Billy
@PravdaSeedАй бұрын
🔋 Thanks Billy
@PravdaSeedАй бұрын
🔋 Thanks Billy.
@PravdaSeedАй бұрын
🌀🔋 Thanks
@PravdaSeedАй бұрын
🌀🔋 Thanks
@CapsCtrlАй бұрын
Great video, straight to the point and explains all the relevant information, thanks! 🛡✨️
@BillyWuАй бұрын
Thanks. Glad to hear it was useful
@dad_uchiha1707Ай бұрын
I saw the graph and got instantly confused
@rumely72322 ай бұрын
love
@BillyWu2 ай бұрын
Hope you found it useful
@iansingleton74842 ай бұрын
Can it be used in the rain
@BillyWu2 ай бұрын
Yeah seemed to work well in the rain but tried my best to generally keep it dry as over time I suspect it could cause issues
@Brad6562 ай бұрын
NO NO NO. The charge and dis-charge curves are crap, as is the capacity.
@samslap35782 ай бұрын
Health department will , give them a zero just because of one person
@samslap35782 ай бұрын
She supposed to have gloves on when touching products
@dariomarquez122 ай бұрын
What an awesome channel!! You've got my subscription for learning more on battery technology
@BillyWu2 ай бұрын
Thanks! Appreciate it
@ParkourRunFree2 ай бұрын
Excellent Video
@BillyWu2 ай бұрын
Thanks!
@valramsingh83602 ай бұрын
yOUR VIDEOS ARE VERY VERY GOOD.
@BillyWu2 ай бұрын
Thanks!
@valramsingh83602 ай бұрын
@@BillyWu anytime
@andro32672 ай бұрын
Very good content. Thx a lot!!
@BillyWu2 ай бұрын
Thanks! Glad it was helpful
@MikeEnergy_2 ай бұрын
Excellent presentation Dr. Wu
@BillyWu2 ай бұрын
Thanks!
@evinism2 ай бұрын
This (paired with the first two videos) is an absolutely incredible introduction. I feel like i understand the heat treatment process 10000x better, wow.
@BillyWu2 ай бұрын
Thanks. Glad to hear these videos have been helpful
@yingerxu71092 ай бұрын
Can you help me understand the time-temperature-transformation diagram and the terms related to it? Please please please
@BillyWu2 ай бұрын
Sure. Here's another video where I discuss different ways of strengthening metals, including heat treatment and TTT diagrams kzfaq.info/get/bejne/bdJ9YLxlvdTIo3k.html
@EphraimMollandy2 ай бұрын
a. It may be seen that the time to peak hardness and the peak hardness itself are a function of the ageing temperature. Why does the curve at 30 °C not obey this general trend ? b. It may be seen that at the temperatures 110 and 130 °C an initial hardness plateau occurs before the peak hardness is reached whereas this is not found at the other temperatures. i. Why is such a plateau found at those two temperatures and not at the higher temperatures? ii. Would you expect such a plateau also at 30 °C, although at longer times? help me with these questions
@vankajayalakshmi3 ай бұрын
Very nice
@BillyWu3 ай бұрын
Thanks
@_neophyte3 ай бұрын
good job to whoever named "cast iron"
@BillyWu3 ай бұрын
🙂
@user-hp5xh6fu7p3 ай бұрын
Prof : can I get your email please.. I have project in annealing
@user-sv1rn7jl8y3 ай бұрын
Sir. indeed an informative video, keep enlighten us. I request you to make some shots of TMT Bars (Primary and Secondary), and causes of failures. Thank you.
@BillyWu3 ай бұрын
Thanks and glad to hear it was useful. Thanks for the suggestion for future videos. I have a list of potential next ones, but just need to find the time to create them