Hi, not sure if youll get this as ive noticed this video was uploaded a while back 😂 But hey ho! I have a white/red and a white wire coming from my module. Your videk says white/red to yellow/blue. Any idea where the white wire goes? Thanks!

Nice video, really helpful 😊

Hi, thanks for video. I have replaced as per your instructions but unfortunately my door has locked in the open position. Any tips to close it and prevent it from jamming open? Thanks

Not an easy job on most T5s and mine was no exception. The bolt on the inside would not budge ans the two holding the door pull cable cannot be accesses easy if they round off. Really poor bolts that should be replaced with normal type if you manage to get them out.

Camping allowed around bachalpsee?

That’s a lot of faffing about for a tad more light that your then going to dim Down by tinting them down because you say there to bright?

is it me, vid said link to item would be shown cant find it?

120,000 miles is nothing for these 😂 I'm on 318,000 and still running like a dream

you helped a lot, thanks

I’ve just received the same kit. How did you get your door cards off, mine won’t move (I’ve undone the screws and took handles off)?

am going to try peltier module cooling for my yacht as can pick up mudule kit for around 16 pounds then all you need is insulated box section and put the pelteir in the square hole and can use good size on the cheap

Hi, Just a quickie, you connect a thermostat to the call to heat wire by supplying with 12v signal, what about the internal inlet temp sensor? will you have to disable that for the new thermostat to work?

Great video! Very informative. Can I add that all the bolts supporting the door are spline heads. I used a Torx bit on my van before viewing your video and rounded the head of the bolt. Thankfully after viewing your video I used the mole grips to loosen the rounded bolt.

Very good video thanks !

Nice clear instructions. Will give it a go, cheers!

We have the same cool box, was thinking of fitting stat for our boat. It pulls about 3.6 amps. Does the speed controller not slow the fan in the cool box lid as well? As this was 3 years ago is it still working? Thanks.

Have you got a link for the relay please ?

hi do i need to splice both wires in or cut both and join TIA . luv the channel

I have the small ridge monket and did a steak burger and sainsburys slightly spicy potato wedges ..cooked it on a coleman sportster dual fuel and it did a great job ....well worth a try only thing is it did a portion for one

My door won’t close with this part 😢

Do you have any fuses/breakers or a kill switch on your solar set up?

Good to have some reports. I have the halfords 40ltr as well and have been tweaking it to try and increase its performance. I replaced the peltier unit, added a second hot extract fan and a voltage increasing adapter to increase all fan speeds. Obviously that makes more noise but not too much. It cools better now but will test around 4.5 hour run and compare. Next step is to duct AC air into the unit so hopefully the ambient air at say 16c means I can get the internal temp down to maybe 4c. In all honesty because the same size peltier cooler is used in 24ltr coolers and my 24ltr easily gets to 8c I would suggest buying 2x 24ltr coolers might be easier to site in your vans as well, also gives you a larger overall size (48 ltrs)

very nice 👍❤

Covered it up so half the ventilation 😂

Thanks so much for this - worked perfectly. On mine all four bolts appeared to be an M8 spline.

When someone who know how to handle and understand camera, will produce excellent results. Not just some random famous youtuber who viral and do some shitty camera recording and photography and then, complaining. You sir deserve a like

Imagine the neighbours...: He's out there again dear... Is he? Whats he doing now... He's sitting their talking to himself again dear... Is he? What else is he doing.... Well i THINK he's filming himself again..... Is he? is that all he's doing.... Well your never going to believe this dear... But he keeps slamming the door on himself... Over and over and over..... Is he? Well i always thought he was a bit strange Yes dear it seems you were right.....

thanks, keep up the good work/videos

Incredible photos. I’ll be doing the same in July 😃

Hi the spring loaded latch is very important, my door would otherwise always close when I am parking on a hill

Stop smacking your lips!!!

Cracking vlog and thanks for sharing buddy.

WELLDONE! Thanks for sharing!

Thanks for that my t6 one has just disintegrated

Just bought one on your recommendation my man, thank you, especially for showing the older one, I need a bag for my daily trip to work that holds my gym gear and waterproofs, will be removing the camera section stuff, but looks ideal! Thanks again!

This part doesn't seem to work on my t5.1

Great video Hope you are well and hope you post again soon Take care simon

If only you believe... don't kid yourself. To clean the intake manifold it is necessary to remove it. Then you can scrap most of the carbon build up out. The next step is to get a air compressor with a blow gun. mount a copper tube to gun. The tube needs to be several feet long. With a 90 degree bend in the end. Place manifold in a secure manner with the intake opening to the bottom. (Remove the EGR valve first). Get a gas torch and point torch into the lower opening. This will ignite the carbon. Once the carbon is lit spray air into opening. Flames will rise from intake runners. Burn until all the carbon has been consumed. Use a long flex able wire brush to finish cleaning inside of manifold. Pull rest of intake system to clean. Once it is clean you can run spray cleaners every 25k of so. I have 2000 vw Golf 1.9L TDI with over 400K on it. Just went through this dance. Intake manifold was 40% blocked.

May i know where did you drop your car at before you flying off?

Good video but I was looking for a set up that would switch in on /off---better without music I think

Really helpful video. Our top runner came out and wondered if a worn bottom gear may be the cause if the door drops slightly? Do you have a link for the part please?

Amazing photos and vlog very details and interesting one.I love the way you got the angels and corners.All the best!

i cried for emotions when timelapse started

I use one and have done lots of experiments . I run a DC to DC buck converter and you can reduce power consumption by running it at lower voltage. Eg run 7.5v during day, and 5.5v at night

@5:50

Hi 👋 friend I'm new 2 van life but seen a couple of videos on makin pizza 🍕 with a Ridge monkey am hoping 2 get 1 4 my 50th next week u can buy from Sainsburys pre made dough roll it out shape it as a square and cook it 4 a little bit then add ur toppings maybe I can use this 4 my 1 man BBQ I'm gonna do on my next trip!! Keep Stealthy!!👍

thanks

Brilliant piece of kit! Great demo, many thanks 😊

Great idea for the shower 🚿

Would it be possible to have the switch and relay around 10 meters apart.