Way cool. I love this view. What simulator did u use for the sounds?
@michelleBSkiLLz Жыл бұрын
Nice race!
@dejvor Жыл бұрын
Thank you man 😅
@TheSporelord01 Жыл бұрын
What receiver did you use?
@dejvor Жыл бұрын
Ghost ultimate hybrid. It is ghost receiver and vtx in one.
@TheSporelord01 Жыл бұрын
@@dejvor I meant on the ground side. What do you have hooked up to your goggles as a VRX outputting the video signal?
@dejvor Жыл бұрын
@TheSporelord01 ahaaa, i have rapidfire module.
@gorandukic5278 Жыл бұрын
Stop flying behind you 🤣
@dejvor Жыл бұрын
Its a good point hahah. Never thought that way hahaha
@cloak862 жыл бұрын
hahahah top
@T0mekk72 жыл бұрын
Very nice video Tep FPV. Good weather in hospital. My friend also like dogs, cheers.
@UniversalPioneer2 жыл бұрын
Is it connected via bluetooth or wifi with the gopro?
@MateRimacAuto2 жыл бұрын
Koji si ti car Tep 🤘 Sretan Bozic stari!
@CitadelPhotography2 жыл бұрын
I have been looking everywhere for an explanation of how to install and power a vtx on this car. I need more help than “connect it”. How did you get power from the cars battery to the vtx and camera!!! This it not obvious to beginners.
@lanszsazani28012 жыл бұрын
Hi,where is the boot button for f722 mini?Tq in advance..
@dejvor2 жыл бұрын
Hi, it is on the side where processor is, where 8 big pads are, next to mounting hole. Opposite side of usb
@illusionfpv13262 жыл бұрын
I noticed you’re using a bigger battery. What battery is that? And what are the specs?
@hulkfpvrc48932 жыл бұрын
Bro thats too much of a pain to do it like this. Im not saying its not good, but there is an easiest way to get fpv from your k969. Ive done it on mine, and it is awesome! Go to my channel and look for the k969 fpv.
@IR-ku1mp2 жыл бұрын
I am a proud owner of Orqa One and can say it is the best analog goggles on the market at this moment. Super quality, no usage problems. Orqa works perfectly with Rapidfire.
@FilipRadelic3 жыл бұрын
Nice dvr 🥰
@vektr62783 жыл бұрын
How does the goggle connect to the gp? Have to buy a wifi module for the goggle? What happens while gp is recording and the quad went out of wifi range from the goggle like LR flights then comes back close, still able to control?
@zeDoSauRus3 жыл бұрын
Ja volim drvo aj lav tri!!
@felipetvictor3 жыл бұрын
Nice flight !!! Like 🇧🇷 .
@samotmina3 жыл бұрын
maksimalno opuštanje 🥰👌
@FilipRadelic3 жыл бұрын
Awesome bando!
@MrSmithFPV3 жыл бұрын
What a nice feature. Really useful!
@MrSmithFPV3 жыл бұрын
Whoo, thats fast mate! Seems a nice build!
@kinafpv3 жыл бұрын
Cool!! Subscribed
@strikerFPV3 жыл бұрын
Nice, but what about whitebalance, shutter and iso?
@Don-EfpV3 жыл бұрын
cool info bro
@Posichronic3 жыл бұрын
Be nice if they would make some goggles to go with all this other stuff they've been putting out.
@MsStevieWoo3 жыл бұрын
Can not wait for this to come out of beta since it has also fixed a few other issues that i had in the firmware ie freezing dvr. The relase note says no bug fixes then again its sorted some out ;)
@hond4fr3ak3 жыл бұрын
Ohhh noooo, perfekeleee. I đona go bja sma orqasss.... Šupi vupi pampraaa. Riks
@DrFrantic773 жыл бұрын
I hope Orqa will be in stock soon, great vid bro, sub. Greetings team #bckflp
@dejvor3 жыл бұрын
Thank you mate ❤
@norcaldrones53893 жыл бұрын
What generations of GoPro does it work with? Gopro6? Gopro7?
@dejvor3 жыл бұрын
I tested gopro 7 black and 8, and press release have it for gopro 9. I guess gp6 works too.
@abimaputra3 жыл бұрын
It was nice clear video. 👍What if the Go Pro Wi Fi was locked with password? Was there any password input there?
@dejvor3 жыл бұрын
@@abimaputra i took one gopro 8 that was not paired with my mobile phone. I turned it on, turned my app and goggles. Connected to wifi of orqa and did the same procedure as with all before. I never had to input any password. So i guess its automatically connected. I remember before i had to manually enter password when connecting for the first time but not anymore now.
@abimaputra3 жыл бұрын
@@dejvor hi. Thanks. Why I cant see a camera Icon at Orqa App?
@dejvor3 жыл бұрын
@@abimaputra did you updated your app?
@IshamPadron3 жыл бұрын
Orqa FTW!
@FindmeFPV3 жыл бұрын
That is sick man. So out of the box, love it!
@rc31513 жыл бұрын
Slick dude well done
@cristiammena51303 жыл бұрын
Hola, seria bueno compartieras los PIDs
@edismajic87193 жыл бұрын
Jel ovo na Dugom otoku?
@dejvor3 жыл бұрын
Šolta Nečujam 😁
@kyserfpv73123 жыл бұрын
Speed?
@dejvor3 жыл бұрын
Speed? 😀
@balkicroatia3 жыл бұрын
Ko bi ocekiv'o ovakvu eleganciju od Tepa;-)
@gorandukic52783 жыл бұрын
🥰
@DomiFPV3 жыл бұрын
Great plane! 😆
@MrZziraldo3 жыл бұрын
Bravo Tep 😊. Pa ko je to meni postao smoooth hehe
@mikewrobel4 жыл бұрын
Did you paint the body? It looks awesome! Mind if you share your process?
@croeternal4 жыл бұрын
Prekrasan glas
@gorandukic52784 жыл бұрын
Smiri prste 😍
@BrandonHall14 жыл бұрын
Where are you pulling power from for the cam and vtx? the receiver?
@BrandonHall14 жыл бұрын
Actually after popping the cover off the rx I think I see what to do. there are gnd and vdd pads that I can get 5v from and hopefully they have enough current for the cam/vtx
@dejvor4 жыл бұрын
@@BrandonHall1 sorry i was offline for a bit, i solder it directly to a switch so when i turn on the car i turn on everything, made it easier for me. and used micro 5v bec, because on full throttle you get a lot of current drop from battery. that is why i suggest to use bec :)
@BrandonHall14 жыл бұрын
@@dejvor the pads I found seem to offer a steady 5v. Not voltage drops as of yet. Everything turns off by the switch too. Your car seems a little different from mine though. Two of the mounting points for the camera holder are blocked on my frame by locator tabs on the rear differential.
@dejvor4 жыл бұрын
@@BrandonHall1 ou i forgot to mention, i moved complete rear end for one hole more back, with the car you get the longer pinion to replace on rear differential, also move whole box with receiver electronics in front so you get more space in the back for gyro in the future or anything else you want to mod. Thank you for info about 5v pins. Didnt know about it
@BrandonHall14 жыл бұрын
@@dejvor found it out of necessity and impatience. Not very friendly solder pads though.
@joza22434 жыл бұрын
Moja škola
@SEKILEFPV4 жыл бұрын
Opet si vozila drona 🙄😬
@FilipRadelic4 жыл бұрын
💨☂️💨☂️💨☂️ nice flying in that wind 💪
@dejvor4 жыл бұрын
Thnx bro 😘
@Klawful20114 жыл бұрын
@Tep FPV I really want to modify your mount to be a bit lower and flatter camera angle, and suitable for micro size camera's (Like the Predator V4 and Foxeer Razer, or Falkor 2), as I'll use a TBS Unify Nano32 inside. Any chance I could have the file? OR, if you post a modified version matching those specs, I will happy give you a generous tip on Thingiverse (If you setup tipping)
@dejvor4 жыл бұрын
sorry i am late with reply i didnt see it :( I can send you file so you can change it the way you want it. give me your mail address. I think i have my tipping setup and thank you so much for that :)
@JT-jy2sy4 жыл бұрын
Great review, Any long term use comment?
@dejvor4 жыл бұрын
Thank you. Still alive i in hard use. No signs of problems. After all the time my grade would be 8/10 overall.
@RavOCW4 жыл бұрын
Great video! Really pleasant to watch. What camera do you use? Is it some Split kind of cameras? What quad do you fly? HD Tiny Whoop style?
@YouDontKnowMe4 жыл бұрын
Nice flight dude! Im also sometimes thinking to switch from bf to fl1 but i would hate to change my rates
@dejvor4 жыл бұрын
You can set up rates like on betaflight. I know it would take time to fit it to feel the same as beta rates but try it. 😁
@YouDontKnowMe4 жыл бұрын
Tep FPV thats the problem im rly confident with ma actual rates and to find the sim in fl1 would be hard for shure 😅