Vit Mods

Пікірлер

@GuillermoARP Ай бұрын

I don't understand, WHY do you need locking hubs????? From what I've seen, its just an annoying and completly useless extra step to get into 4wd.

@vitmods7086 22 күн бұрын

Hi there, no mate you have these as they are far more reliable, better fit fuel economy, you can unlock one side of you break a shaft, you can run in low box in 2wd, ist put power to the rear for winch turning, you leave them locked when off roading and just switch between 2 and 4wd - so basically far more advantages than disadvantages

@GuillermoARP 19 күн бұрын

@@vitmods7086 Mate, thanks for your reply! But I still don't understand. In my mind, it goes like this: A normal 4wd vehicle, with a lever on the cabin to connect 2hi, 4hi and 4lo, no front locker. With locking hubs, in theory, I could make it... let's say, 3-wheel drive if need by some reason (By unlocking one of the hubs), is this correct? - But then, let's say that I have both hubs UNlocked and I want to engage 4wd, I would have to engage 4wd on the cabin AND lock the hubs, that would be an extra step, am I right? Also, hub lockers do not work as a diff locker from what I just saw. Again, thanks for taking the time to reply to my comments.

@oskt4397 Ай бұрын

good video

@maximumlvl5001 2 ай бұрын

Is this a 1.3 or an sport model cause i csnt see any out there on the Internet

@lookarabbit2888 2 ай бұрын

Coopers on the trooper :)

@LirstnameFastname 2 ай бұрын

Hi mate, what Land Rover steering arms have you used there? and what modifications did you have to do to make them work with the Trooper? They look waaaay better than the stock ones. Cheers

@alec1202 2 ай бұрын

that intro music scared the crap out of me

@zdavidzz 2 ай бұрын

Can you explain what happens when someone puts manual hubs in LOCK position PRIOR to engaging 4wd? Thanks.

@CCUK- 3 ай бұрын

Dude that 370z would have dusted you if it had a decent driver who didnt brake every 2 mins. But love the ignis i have one myself totally standard but watch this space. Where did you get the poly engine mounts from by the way?

@user-bt4fl5ie2f 3 ай бұрын

Could you please tell me if it will be fine to remove back muffler and add straight pipe with twin exhaust pipe ?? Waiting for your reply! thanks

@glenndavid8725 4 ай бұрын

We have a 1.3 Ignis GL and we live in Wales, quite often embarrass tasty geezers in their exotica on local b roads 😂

@coldprime1019 7 ай бұрын

What The.... Horrible BGM

@catalinilie306 7 ай бұрын

Please use a tripod. Didn't get a thing from your video.

@AlexHools 9 ай бұрын

LOVEEE THE MIDDLE EXHUAST!, I WILL ADD AS WELL!

@gehtdianschasau8372 10 ай бұрын

Is that "hinge" between flansch and strut necessary while driving or just for installation? I could custom fit one to my car, but the hinges would make that far more work. Also: i think i would go with stainless steel, because low grade, easy to weld aluminium is pretty weak but still far harder to weld and warps more than stainless. Edit: i would screw on the flansch measure twice, then cut bend and grind a tube to fit and weld (TIG weld, no sparks inside the engine bay, heat-source in a constant stream of inert argon gas) it all together, when the car sits on it's own weight.

@joeford5088 Жыл бұрын

nice ride any chance you could tell me where you got the wheel flares from please in need of some like the ones you have.

@Kudos_OG Жыл бұрын

If I leave the front hubs unlocked, and put it in 4L, can I still use low range with open front diff? Or do I need to lock the front hubs if I’m going into 4H or 4L? Is it ok to leave them locked, when driving in 2H? Thanks in advance!

@urishaham2544 Жыл бұрын

Leaving the hubs unlocked in 4L will give you rear wheel drive in low range. Totally possible to drive like that.

@MASO204 Жыл бұрын

hello mate I'm looking at getting a 3.0 turbo diesel automatic but seen on paper the bhp is pretty low. Are these things really slow and not much fun to drive?

@leopoldojoaquin8716 Жыл бұрын

Excelente ilustración!

@budak132 Жыл бұрын

That ear rape intro

@aleksanders3556 Жыл бұрын

Impressing! Have you somehow modified the rear suspension?

@pierrejeanes Жыл бұрын

Noob question : can this sistem be activated/deactivated with a push of a button

@zdavidzz Жыл бұрын

lol

@tomekkat6081 Жыл бұрын

Please make a list of modifications under the video because you can't hear everything on it because of gusts of wind.

@valzdemreevesalma2905 Жыл бұрын

Would it be okay to leave those manual locking hubs LOCKED even if 4wd is not used?

@zdavidzz Жыл бұрын

Yes, but your fuel economy suffers. Just don't leave them unlocked for too long.

@thejackaroo4WDcampingchannel Жыл бұрын

I'm from Yorkshire and I have to say, I don't miss the damp horrid muddy weather.

@thejackaroo4WDcampingchannel Жыл бұрын

What tyre pressures are you running, they look quite hard? Have you tried about 10 - 15 psi for better traction? In reality, with reduction gears and front and rear lockers, you should be walking that course not struggling. We do harder driving than that on the tracks here is Oz, have a watch of this kzfaq.info/get/bejne/b7l2ndN_282tgn0.html

@calt1782 Жыл бұрын

That front bumper looks dope man 👌 good lookin truck 🤌

@colinphotovideo Жыл бұрын

The 3.0 diesel engine not as reliable as the 3.1?

@off-road-isuzu-opel5841 Жыл бұрын

👍

@magnumondeko6503 Жыл бұрын

THANK YOU FOR THE INFO. TO BAD I HAD TO TRADE MY SPEAKERS FOR IT. . .

@pickle9607 Жыл бұрын

Are these front or rear bearings ??

@vitmods7086 Жыл бұрын

Front mate 👍🏻

@tomosarmy Жыл бұрын

man where is ignis sport

@vitmods7086 Жыл бұрын

Hi mate - sold it quite a while back and bought a few other toys instead 👍🏻

@alexzam4444 Жыл бұрын

Where did you get your bumper ?

@vitmods7086 Жыл бұрын

Custom made by Blood Red Off road 👍🏻

@robertoartilesra Жыл бұрын

La bestia ❤️❤️

@CodyShell Жыл бұрын

Fellow Trooper owner! Great little rig! Here in the state's the 2nd Gen 2 door troopers are VERY rare. I've only seen two in my life!

@vitmods7086 Жыл бұрын

Thank you 😊 used to be quite common but not so many left these days

@djscheppy Жыл бұрын

interesting intake set up. is it the stock setup with heat-tape over the top and holes drilled into it? notice a performance improvement?

@vitmods7086 Жыл бұрын

Hi there The tape is just to try and reduce the heat soak and the holes to try and get more air in the intake - it all makes a nice deep throaty noise, you are never going to notice much increase in power but it can’t hurt to get better air flow 👍🏻

@Gamesplaytoday 2 жыл бұрын

Where's the front and rear bars from

@carterfulghum6838 2 жыл бұрын

Worst intro in the universe

@zdavidzz Жыл бұрын

He fkn busted my speakers gayyyy

@nelsongichohi2811 2 жыл бұрын

You guys have you experienced carbon when using 4jg2 engine?

@emmasouthern2651 2 жыл бұрын

Great job…. Did you come across any uk suppliers that could replace / repair chassis on a 3.1 SWB. I want to renovate mine. I have owned her for 15 years and want to keep her for another 15. Struggling to find anything.

@robthurlow1347 Жыл бұрын

Independent Isuzu in York may be able to help you