What brake lines do you have?

Been looking for a video like this for the past 6 months, thank so deeply brother 🙏🏾🙏🏾🙏🏾🙏🏾

Why didn't you replace your driver side front fender also?

Folks...I think you just saved me some cheese & bread 🍞 $$

Did u have to re program the new rack after install?

You implied storing car outside in winter is bad for corrosion. There is a theory, when vehicle is covered in salt its better to leave it parked outside. Reason is the garage will melt the snow and ice, allowing the salt to start corroding your vehicle. If you leave it outside, the salt stays frozen, no damage done. At least not as fast as a daily application and then melting of salt, as in daily driver on salted roads, then parked in the garage. I now live in the south, so I have not been able to test this theory personally. I have used products similar to these, but none of the brands mentioned. Reason being I'm retired aircraft maintenance, and absolutely zero corrosion is acceptable on an aircraft. The stuff I used is only available for professional use, not home use. For whats its worth, if your trying to choose between which product is a higher quality, the good stuff is more waxy and less oily, dripping isnt usually a concern.

Nice! Great video!

PB BLASTER...they make a product called ...METAL SHEILD..... Harbor Freight sells it.... its awesomw

So which position of preload makes for a softer ride? My ride height is acceptable but the stiffness of these ECS units I put on my E36 a few weeks back are way too bouncy and hard riding, esp on the front with the various terrible sidestreets here. Looking for a more compliant ride with these while having raised the car to suit my old crippled ass now.

Solid tip! Nothing is worse than having to loosen a rusty bolt!

Thank You, these lifting pads a very neat, i will check if these are available in Australia..

Another solid video, Sir. We specifically produce LEDs for auto. Can we invite you to do a review for our product? We have emailed for an inquiry.

Had no clue that these even existed! Cant wait to take the new ride for a spin

I was just thinking about picking up something like this. KZfaq is reading my mind. Either way, thanks for the good video!

Very nice, a lot of mk7 and mk8 vw guys get the audi jack pad kit, which is similar and designed to protect your jack point! Great first mod choice!

Why is the section to jack up your car always so thin ? Never made sense to me.

just cut a 2x8 to cover the lifting pucks and go to town on the quick jack..... for those of us in the snow belt, will the 2x screws damage the pinch weld where they make contact? do/should I need a marine grease in that area to prevent hidden rust from forming? could one shoot marine grease in the voids of the pad after it is installed to mitigate rust forming?

Great Idea, I need some for the old subarus lol. take it anywhere to get serviced and they love to smash your pinch welds

I’ve personally never understood why Jack stands aren’t built with the pinch welds in mind. These are a good idea, though I’d caution that you can’t use the standard scissor jack when these are installed.

I’m about to attempt to remove the rack on my B7 3.0 tdi. This is a great video for research on how to do it, thanks for making it.

good Video, I'm buying a Quick Jack 7000

Awesome, you gave me one more thing to check on my gti. Apreciate your work.

This video was brilliant i did mine years ago and the setup was horrible and car was all over the road but the instructions were in german (good old kw for you) but this gives me hope of actually just setting them up in the house on a day off and fitting to the car knowing its done correctly thanks for the video 😎

We appreciate the shout-out!! 😁

Thank you for your video. Good job

Reported for dangerous misinformation

I've been working on/building and or setting up track cars and high performance road cars for forty years (yes 40) this year. I've worked with some of the best suspension experts in the southern hemisphere the latest being Sam Macintosh from Marinello Motorsports. SOOOOOOO This guy doesn't even know the correct terminology or how to explain what he's talking about as seen by him stumbling over HUD words SPRING RATES ARE SET BY THE MANUFACTURERS. YOU CAN CUSTOM ORDER ANYTHING YOU LIKE SO ... IF YOU INTENTIONALLY LOAD A COIL SPRING IT THEN OVER RIDES THE FACTORY SET COMPRESSION AND REBOUND EVEN ON AN ADJUSTABLE DAMPER MAKING IT INTO A POGO STICK. IF YOU NEED TO INCREASE THE WAY A VEHICLE FEELS ON THE ROAD OR TRACK BUY THE CORRECT🎉 FUCKING SPRINGS WITH AN INCREASED RATE BUT ALSO TELL THE SUPPLIER WHAT YOU'RE DOING AND WHY AND THEY WILL TELL YOU WHAT NEEDS TO HAPPEN TO YOUR DAMPERS SO TGEY CAN DO THEIR JOB AND CONTROL THE SPRING OSCILLATIONS WHEN A VEHICLE IS LIFTED AND AND THE SUSPENSION IS UNWEIGHTED YOU SHOULD BE ABLE TO SPIN THE COIL BY HAND AROUND THE BODY OF THE DAMPER.

How often does a bushing need to be replaced? Is it part of general maintenance or just replace when broken?

Congrats brother.

You need to work on your volume.We can barely hear you

Congrats on the new ride, brother!

I ordered a front bumper from them for a 2021 Mazda CX-5 Snowflake White Pearl. Color match was not as good as yours (I even mailed them an actual 6"x6" sample of the original front bumper for a good paint match). There was no adhesion promoter put on before they painted, it pealed where it was folded. I carefully drilled parking sensor holes with new step bit and paint pealed back around holes. The license plate bracket screws going into bumper started pealing around there also. They did give me a refund. I'll make sure I don't ever pressure wash the front bumper and try to avoid rock hits.

I agree with your comment - I didn't like that you couldn't rotate the larger led to 90 degree.. That is my biggest complaint. I would have been much happier if it would allow you to rotate it 90 degrees on it's pivot.

Grats car looks great, nice vid.

you need a steadier video holder😐

Very nice! I saw the subaru sign and that was the first car that popped in my head.

Congrats, I don't really follow any Subaru guys these days so I can't wait to see some of the new content with this one!

CONGRATS!

Good luck

Every time Subaru changes the WRX the whole of the internet breaks. Their design choices are very... unique. Great color!

Just want to say thanks for sharing your wisdom, man. It's come in handy so many times. Keep the videos coming.

If it's auto zone it automatically no good.

sure glad it didnt tear the sheet metal control arm pockets,i bet you used locktight !! great video!!

Lots of good points! My hands are always sweaty, oily, and i prefer an aggressive knurling. I also have some older duralast tools that are fine, however this set does look disappointing.

Thank you for sharing!

The thumbnails keep getting better and better 😂

I had hard time fore Elantra GT 2014 2.0 Cylinder 3 missfire P0303 (cold start only) sometimes P0300

They make the same kit with impact sockets. With the performance and availability of battery operated impact wrenches I've stopped buying chrome except for 1/4

Not even gonna watch. Go get a job instead of being a youtuber

If just going with a 1/4 set. Can't beat the quinn set... it'll do everything it calls for plus more...buy the quinn and put In in the trunk. And call it good