Brembo Brake Upgrade for New Edge Mustang - CADILLAC ATS Calipers

No video

Brembo Brake Upgrade for New Edge Mustang - CADILLAC ATS Calipers - GLORIOUS Braking Upgrade!!!

Рет қаралды 743

Күн бұрын

Hey Folks,
In this video, I do the famous ATS Caliper Big Brake Upgrade to my 2004 Mustang GT. In addition, she get the Taurus caliper upgrade as well to round out the braking ratio. Please enjoy the video and dont forget to click LIKE, LEAVE COMMENTS, and SUBSCRIBE!!!
As always, you can email me at beerwrenchkc@gmail.com

Пікірлер: 20

@zachhowdeshell2043 3 ай бұрын

Looks like the cut is finally starting to heal up! I've also never seen caliper bolts come off so easily 😂

@beerwrenchgarage 3 ай бұрын

Well, the scar will be there for a long time so the memories will last. Its amazing what a little leverage can do with bolts! Still waiting for you to bring the Caddy in for brakes!

@QualityMobileAutomotive 3 ай бұрын

Great video! Nice mustang!

@beerwrenchgarage 3 ай бұрын

Thanks for the view and comment Brother!

@QualityMobileAutomotive 3 ай бұрын

@@beerwrenchgarage anytime!

@mchristr 2 ай бұрын

The brackets with the u-bolts are called "moan braces." You can get by without them. If you really want to improve your car, buy the Maximum Motorsports torque-arm, torque-arm springs, and panhard bar. It's such a radical transformation that your car won't feel like a Mustang. Very controllable at the limit of grip.

@beerwrenchgarage 2 ай бұрын

1000% - THANK YOU for the comment! You are correct - the MM T/A is next on the list. I didnt originally get it because of the welding requirement and I had already spent a lot of money on the suspension. The car already has MM panhard bar, MM lower control arms, and a Torsen T4R diff with a 3.55 gear ratio. Maximum Motorsports recommends that if you are NOT going to run their T/A with the their panhard bar, that you run OEM upper control arms and bushings and I did just that. However, with this set up, I blew through the OEM differential bushings in 5K miles. Thats why, the T/A is the next suspension component I will be getting.

@bullet2096 3 ай бұрын

Great video

@beerwrenchgarage 3 ай бұрын

Thank you Brother Man!

@NoLogoGarage 3 ай бұрын

Heck yeah! Didn't know you had a stang ❤ what you asking for the Cobra calipers?

@beerwrenchgarage 3 ай бұрын

For you Bro - I'm asking zero dollars and zero cents. Shoot me an email (beerwrenchkc@gmail.com) and Ill get them over to you.

@NoLogoGarage 3 ай бұрын

@@beerwrenchgarage That would be awesome. Definitely a bit of an upgrade compared to the stock 04 BAER brake setup currently on my car.

@benjaminbrown7521 2 ай бұрын

Where did u get the brake kits from

@beerwrenchgarage 2 ай бұрын

I got my calipers on FB marketplace and rotors from Rockauto. You can get the calipers pretty cheap on Amazon too.

@bullet2096 3 ай бұрын

Do you happen to know the width if the spacers? Another vidoe said his were 2 mm. The ones that came in my kit are 4.5mm.

@beerwrenchgarage 3 ай бұрын

To be honest, I didn't measure them, but they were extremely thin. I do believe they were 2mm. I cant imagine they were thick enough to be 4.5mm. Is your kit for S&S engineering?

@bullet2096 3 ай бұрын

Thanks for the reply. After I asked you,I emailed S&S. It turns out I ordered the kit with the 4.5mm spacers. Glad I didn’t have 4.5mm milled off the calipers. Thanks for your help and the great customer service from S&S Engineering!

@beerwrenchgarage 3 ай бұрын

@@bullet2096 Awesome! Glad you got it squared away and S&S came through!