I find it hilarious that, as im looking at a video of a car that im interested in (as a next buy too) I see a car which i actually own (Smart Roadster).
@BedsitBob3 күн бұрын
What's the point in the plastic nut? It doesn't seem to do anything, other than making changing a bulb more complicated.
@vPerformance3 күн бұрын
Maybe ford used it to prevent a rattle or something
@BedsitBob3 күн бұрын
@@vPerformance They seem pretty secure without them. Anyway, we'll soon find out, because I've left them off. 🙂
@vPerformance3 күн бұрын
You rebel. I like it.
@BedsitBob3 күн бұрын
@@vPerformance I'll get back to you in a few days, and let you know the outcome. I just hope they're not there to hold on the back of the car. 😁
@notlisu4 күн бұрын
Thanks for the great in-depth video. It's getting hard to find C7 owner's hands-on videos and this is one of the best on KZfaq.
@vPerformance3 күн бұрын
That's very kind of you. Thankyou. Put a lot of time into it!
@user-nf3oq2ge3g6 күн бұрын
Running higher fuel pressure will cause the whole tune to take fuel away. In the learning tables
@user-nf3oq2ge3g6 күн бұрын
Runnin the merp mod. I still can’t get access to all my tables like the launch control timing portion.I def like to know how he was able to patch the rom. IV been trying pretty much everything to get the definitions to line up with the patch and get it to work. 1 lc timing table is all I need haha
@sciencefact7 күн бұрын
how happy would a rottweiler sized dog be in the boot with the seats up
@vPerformance6 күн бұрын
If it's a happy rottweiler it will remain happy. Plenty of space. Same as a Q7.
@sciencefact6 күн бұрын
@@vPerformance thanks man
@zabidean668 күн бұрын
Can you show me ..what is the two items that you fixing....I saw a lots of video KZfaq..not even one tell me what camical they using ....just show the bottle in your camera video..thank❤
@adimi878 күн бұрын
Thank you! Byeee! 👍
@tsavalosnicolas152010 күн бұрын
finally did you fix???? and watt was the problem?
@vPerformance10 күн бұрын
Head gasket, destroyed piston rings, bottom end bearings, crumbled piston crowns
@tsavalosnicolas152010 күн бұрын
We change all pistons and rings also injection pump and new injectors problem continue
@Life-Hard-hitting-Quotes12 күн бұрын
I have owned my 17 plate rs7 for 6 years, and I have spent on maintenance only the consumables. What has been up to 6k in 6 years. The only expensive parts are the brake discs and pads.
@vPerformance12 күн бұрын
Beautiful car the rs7. I'd have loved that but I need my dog space!
@wombatau13 күн бұрын
First time I ever got fumed silica it arrived in a chinese food container. As in the plastic type with the tight snap lids. *Fffllooofff*
@paulnottingham251815 күн бұрын
Your behaving like a stupid boy racer and putting the general lives of other motorists at risk..GROW UP..🥴
@bertmuller536317 күн бұрын
Do you have the Partnumber?
@jamesmacdonald309018 күн бұрын
ZF not GM gearbox, that is in the 3.0 diesel.
@robmurphy607721 күн бұрын
Surely you had a warranty
@vPerformance21 күн бұрын
Yes, but independant warranties cover almost nothing, and they don't cover maintenance items. That's a long story for another day.
@emilyjames182421 күн бұрын
They say aim for the corners of windows not the middle
@quadconjurer21 күн бұрын
Wow... I can't believe all the pearl clutching in the comments. Fumed silica is not the same as crystalline silica and is generally considered safe. It's used in food and cosmetics. You should avoid breathing it, especially occupationally, but you'd think we were talking about plutonium reading these comments...
@vPerformance21 күн бұрын
You are 100% correct
@groc227325 күн бұрын
I wish people would stay ON TOPIC ...if the video is about the LS430.....WHY is this guy talking about everything BUT the ls430....no one cares about anything else but what the title says....THE LS430🤔🙄
@vPerformance25 күн бұрын
This video wasn't made just for you, and there are thousands of people who DO care about our other projects
@Polk85925 күн бұрын
Any updates to this thing
@vPerformance25 күн бұрын
To be honest we've barely used it. Been getting ready for drift masters with another team so that has taken up a lot of time!
@tayllor_gknsh975126 күн бұрын
Attempt to weld hook to car, tie rope around said hook and around another cars tow hook. Drive said other car away at high speed. Works wonders 😂😂
@vPerformance21 күн бұрын
Bonus points if you use an elastic rope?
@simondawkins194129 күн бұрын
Good video, lots of helpful tips for a soon to be owner.
@vPerformance28 күн бұрын
Glad it was helpful!
@WealthWave-bp5gkАй бұрын
wondering how long it took for the radiator assembly to fall out of the front end
@vPerformanceАй бұрын
I didn't keep it long enough for that. Sold it to a couple of gypsies who wanted to use it for armed robberies I guess
@Lesbisk1000Ай бұрын
This model extremly cheap in UK. They are around 50000. In norway the cost for this from 2017 around 100000 pounds
@vPerformance29 күн бұрын
Gotta love those taxes 😔
@itdoesntsuckitself3173Ай бұрын
cheers!
@davida7713Ай бұрын
Stupid looking & very unbalanced with 20mm rear & nothing on the front . Plus rear is far too aggressive v’s the front
@vPerformanceАй бұрын
Disagree.
@davida7713Ай бұрын
@@vPerformancetake a good look at how flush the wheels are to the rear arch & how caved in at the front the wheels are 😆😆 otherwise a visit to specsavers is needed for you 🫡
@davida771316 күн бұрын
@@vPerformancethen you need your eyes checked 😆 The perfect video how not to modify your rs6 🥱
@vPerformance16 күн бұрын
In my humble opinion, owners can modify however they like.
@williamsalmon1632Ай бұрын
Rev it up and see
@vPerformance28 күн бұрын
It just belches smoke until it warms up
@silenthill87Ай бұрын
U say boxer for a nice purr noice but thing is get a jdm 2.0 boxer and the rumble noise is non existent :(
@vPerformanceАй бұрын
Do they come with equal length manifolds on JDM factory cars?
@silenthill8729 күн бұрын
@@vPerformance my point exactly lol I don’t want to buy a jdm Subaru to sound like an evo or a civic. I heard one go by the other day and it sounded awful for a Subaru. I had to look twice
@vPerformance29 күн бұрын
How much would it be to swap the manifold?
@silenthill8729 күн бұрын
@@vPerformance so you ask me a question does jdm comes with equal length headers ?and now you ask me a question how much would it cost to swap a manifold. My response ask a mechanic for a price and information regarding this
@vPerformance29 күн бұрын
Sorry I was making conversation. I'll stop.
@derin111Ай бұрын
Thank you for such a clear, no nonsense explanation!
@vPerformanceАй бұрын
Glad it was helpful!
@Concept5NorthАй бұрын
At last you guys have upgraded to the ultimate in drift VIP luxury 🙂 all it needs is at least 1 big turbo, or maybe 2, and oh boy it sounds good, welcome sirs, to our world
@GrizzlyAdams71Ай бұрын
Egr is like going jogging with a mask on.
@vPerformanceАй бұрын
Except the mask has a pipe which connects directly to your own farts
@user-sf7kl9uh7kАй бұрын
Name and shame that dealer
@liamlambert1186Ай бұрын
Any chance you have a video on how they sounded while the car was running?
@markjackson887Ай бұрын
What happened with this project? Did you fix it up and run it on the track?
@vPerformanceАй бұрын
Sadly no, I had a child and everything got abandoned. It went to the great scrapyard in the sky
@markjackson887Ай бұрын
@@vPerformance Never mind, I’d love to see you fix up some old beaters on a budget in the future. As you elude to, kids are wonderful but also the enemy of disposable income 🙄
@vPerformanceАй бұрын
You know I've just had a light bulb moment. For me it's not the disposable income, it's the time. But I can get more time by working less days a week. I'll have to give this some thought
@prosche407Ай бұрын
people are forgiving this car 。。。。。
@chrismfc2625Ай бұрын
Jesus fkn Christ why add that annoying tune to the video man no need just do it without it ... Feel like a need a box a paracetamol now thanks for the headache
@markjones338Ай бұрын
Just strayed over the speed limit lol 20mph over lol
@johnhill6914Ай бұрын
HKS sounds alot better
@vPerformanceАй бұрын
I agree with you 100%
@cwmotorsports4497Ай бұрын
Do I use a release agent
@WoodyBmx25Ай бұрын
Its an lsd but its standard. Nothing special since most center diffs are that way. Also i welded the lower ring in the housing first just to give the splined section extra support to stay centered.
@mortensaaugaard5795Ай бұрын
thanks! I'm planning to make a tail piece with trunk for my recumbent bike, looking forward to the process
@rogernakada87272 ай бұрын
I have a abs plastic piece that’s used as a canard for my front bumper. I want to make a carbon piece off of it. Can I do the same procedure you did on that plastic? Great video. Thank you sir
@1975reispedro12 ай бұрын
Send it to a friend that can evaluate and "see" the software inside if there is one 😂😂😂😂 let us know after....
@TechSpark402 ай бұрын
Are you extracting the program from the rom to program the hall computer again?
@MarkSouthee2 ай бұрын
Very illuminating 😁
@knighthawk35592 ай бұрын
You didn't mention the colour..... Awful
@garageautosports2 ай бұрын
A set of O2 sensor extension harnesses should be used in 4.0Ts with downpipes so that the harnesses can be run along the back of the heads rather than over the manifolds. Get in touch and we'll set you up with a pair 🤝
@wutthedutch2 ай бұрын
excellent videos ive learned a lot here
@wutthedutch2 ай бұрын
where do you buy your supplies to do this? (cf and resin)
@vPerformance2 ай бұрын
Easy composites, or a local place called Allscot
@DaleSteel2 ай бұрын
Jesus christ what's he come dressed as a tramp?
@craig3572 ай бұрын
Covid masks FFS🤣
@vPerformance2 ай бұрын
It was like living in another time line for a while wasn't it?
@craig3572 ай бұрын
@@vPerformance It certainly was. My son is after an RS6 around 2015/16 plate so your vids come in handy for him in what to potentially watch out for.