ilikeurtractor

Пікірлер

@basspig 2 күн бұрын

It likely wasn't the voltage but rather the phase difference wasn't enough. And split phase 240 volts you have two opposite 180° out of phase bus lines. With three phase they are only 120° out of phase so the voltage difference is even less then you would expect from the 208 volts. Probably the inverter didn't like the fact that the phase difference wasn't 180° between two connections on the three phase bus.

@basspig 8 күн бұрын

Yeah the old diesel fuel seems to be a big subject of talk on the smokestack form. They're always talking about having to add biosides and lubricants because the modern low sulfur diesel doesn't lubricate the injectors like the old diesel fuel did and it also is prone to bacterial growth in the fuel tank. Then you got to worry about water separation. My advice would be keep the tank full and use good quality fuel.

@robertsimard735 9 күн бұрын

Great looking saw. Wish I had one😊.

@MapleRidgeHomestead 12 күн бұрын

Great review, just picked one up from Harbor Freight for $189 on sale!

@SurvivalFarms 13 күн бұрын

I am seasick from watching this video😂 Would be better with a small single phase unit. Don’t you need 240v?

@ezegroup22 Ай бұрын

This is a very useful video!

@johnspence4158 Ай бұрын

Thank you. This is info I needed.

@Ilikeurtractor Ай бұрын

Thanks for watching and I appreciate those who take the time to say thanks! Seems to be rare these days...

@Robodie Ай бұрын

Did that drill attachment come with the kit? I don't recall seeing that mentioned, but I've been doing stuff while this is playing and might have missed it.

@Ilikeurtractor Ай бұрын

Thanks for watching! A drill adapter is not included. The link for the one used is in the description if you're interested. You might want to consider the heavy duty (HD50) one rated for impact use as the one shown in the video is not. Impact drivers can install larger anchors and in more difficult ground and won't twist your arm off in the process!

@michaelshaw5687 Ай бұрын

Thank you for posting. How is the Harbor Freight holding up. I keep going back and forth between Shelter Logic and Habor Freight

@Ilikeurtractor Ай бұрын

Thanks for watching! The HF and SL units in the video are both holding up fine. However, I have other units installed that have not being doing as well, both HF and SL. At this point, the SL units *seem* to have a very slight strength advantage for their structure (their pipe frames), but the only way to confirm for sure is replacing the HF ones with SL ones in the same locations and have the SL units experience the same weather conditions which may not occur again. The HF units are suffering from piping failures and usually where they are not protected as well from the wind from surrounding objects like trees. Snow loads have been a problem when storms bring 8-10 inches *sometimes*. But again, they are very close in capability and *IF* the SL has an advantage it is so minimal that I don't think it would make a difference from a practical standpoint. It's kind of like having two cars with one getting 30 mpg and the other getting 31 mpg. Yes, on a 1000 mile trip you might save $5 using the car that gets 31 mpg but as far as one car making it the distance and the other not, it's only under conditions that are in such a precise window you'll likely never experience it. If you can, try to keep the units out of direct sunlight and wind as much as possible. Those two factors are the most detrimental to their lifespan, especially the covers and both brands behave similarly.

@soulmedicine 2 ай бұрын

You can use a your old ladys electric hair dryer to .👍🏻

@stereomojo 3 ай бұрын

Cool test. Thank you!

@Smashleytulsa 3 ай бұрын

The difference in prices probably the weight of the fabric used. They have 7.5, 9, 13.5 and 22.5 ounce I believe

@MarkLaning-rt8lh 3 ай бұрын

What you think is a idle adjustment screw isn't per say, it's an "idle air" adjustment. basically a second low speed adjustment.

@mikulskn 4 ай бұрын

I just ordered an alternator for my G4200H, but I have a question on the wiring for the two spade terminals on the alternator. When I search other videos for "wiring three wire alternator", like this video ( kzfaq.info/get/bejne/jLGJp5ufydy-iZc.html&ab_channel=VehicleFreak ), they all seem to just jumper one of the spade terminals to the main output post right on the alternator. The other spade terminal wire goes to indicator light, and then the wire after the indicator light goes to the switched power on the ignition switch. Is this the same for doing this mod on the Kubota?

@Ilikeurtractor 4 ай бұрын

Thanks for watching! Because I have only done one of two of hese and it's been a few years I'd recommend deferring to the wiring instructions for the alternator which hopefully comes with it. Not all alternators have the same wiring but if the alternator you're getting is the same as the one in my video then I would wire it up the same as in my video. Sorry I cannot be of more help.

@DugEphresh 4 ай бұрын

Well done, thank you gentleman.

@bornr2797 4 ай бұрын

Why does it take 20 min to get to point.....

@stanleybest8833 4 ай бұрын

Ether can EASILY blow up inside it like a grenade. Use a kettle of hot water on the cylinder. This is a prolonged crackpot video.

@richardwooldridge1505 4 ай бұрын

I haven't done it yet, but I got a steering gear from a G1800 and will replace the present setup with the G1800 unit. It has an enclosed gear with bearings, etc running in oil. I did the alternator conversion a few years ago...

@55tumbler 5 ай бұрын

Mine is doing same thing. Repair shop had the truck 3 diffenrt times never fixed it.Replaced tipm twice still problems arise but less problems

@stanleybest8833 5 ай бұрын

No. You didn't teach anything good. Mount it on a heavy plate of aluminum with fine 3/8 bolts. Don't use ether. It's way too easy to blow up the motor. I just wired the decompress lever up and cranked to clean out air. Use only 15W40 oil and real diesel fuel. I honed a 3/4 to 1 inch shaft sleeve to mount a big pulley. Cold weather? A kettle of hot water poured slowly right on the top of the cylinder. It wants a long gentle break in. Avoid the slowest and highest speeds.

@User-sw8gb 5 ай бұрын

this is great! Now I know what clamp, chain, jack to look for.

@StonedOli 5 ай бұрын

Long box you say... I hauled mine home in a Honda Fit. :)

@pkerit308 5 ай бұрын

For less money, buy used metal roofing and 2x4s at estate sales. Use real materials instead of cloth and thin pipes

@crimsonpunx 5 ай бұрын

What kind of oil should I use for a saw like this? Just got a 306a but its empty

@bumblingfool 5 ай бұрын

One thing I noticed on my canopy/tent/carports is on my HF the condensation is awful. Dry when it's raining, but when it's cold out, it will actually be raining on the inside, while it's dry outside. The shelter logic does not have that issue. Less ventilation maybe?

@SurferJoe46 5 ай бұрын

The HF fabric only lasted a year and I replaced it with a Dayton tarp (16x30) and that lasted a year - but then I got a hay tarp from Murdocks and that lasted 3 years and now I see that I have to replace it again. I just put the new ones right over the old one and that adds a lot of strength - we have had some heavy snow and that idea seems to work best. The frame is great and I sunk some PT 4x4 beams in the ground and ran some long threaded rod from them up to the bottom of the frame and the wind has not been able to move or bend anything in over 7 years.

@johnhershey4010 5 ай бұрын

That number 4 is 4 stroke Engine

@dizzysdoings 5 ай бұрын

I had an older HF one up for years! You used to be able to buy a replacement cover for it, then they changed the style. I don't recall now how big it was. I used it to store hay. I just put a new 20x20 tarp on it every year. The frame is still in good condition. It's all slip joints. It doesn't have the anchor pins, but instead has pegs that go in the ground through the frame. Currently, I'm not using it, so I took it down. I'm planning on moving this year. Once I do, I'll be using the framework to build a greenhouse.

@offgridamy7176 5 ай бұрын

Mine crushed when i didnt get the snow off it fast enough.

@vaalrus 5 ай бұрын

After a few of my own, and putting up SL and knock-off fabric shelters, I find the SL ones have a better assembly scheme, but the knock-offs are fine, if slightly more annoying. After dealing with the fabric replacement, while I’m sure the “premium” fabrics at their price would hold up fine (I’ve got a ‘professional’ fabric quonset that’s going on 10 years), when the fabric shreds on the current units under my care, I’m going to source some steel roofing or siding, and just screw the metal right to the frame. I’ve done this once already, and it turned out very rigid, and handles wind and snow just fine.

@joeschmoe6908 5 ай бұрын

We're calling tents sheds now?

@-_-John-_- 5 ай бұрын

I can't stan Menards rebate system.

@rickyanke9407 22 күн бұрын

You mean not actually getting a rebate but rather "company store" money like the coal mining industry gave their employees?!? Wasn't that deemed illegal?

@cjack121 5 ай бұрын

I can add a couple “cons” to the HF side. That white coated frame will rust and bend in just a few years, you’ll find yourself drilling and adding bolts or rivets to hold it together and having to dispose of the shredded cover in a year or two. The Shelter Logic is much higher quality overall. The SE cover’s not much better but you can buy a upgraded cover, for a price. After replacing the standard cover twice in 6 years, l upgraded to the top of the line cover. This cover is expensive but but there’s no comparison, my shelter has been up for 12 years and still has many more to go. Even with the upgraded cover the cost is still a fraction of what a more permanent shelter would be and can be quickly removed and stored if need be.

@AJ-qn6gd 5 ай бұрын

How about using methylated spirit, a bit like starting a kerosene lamp.

@markfcoble 5 ай бұрын

Thanks.

@jaantrag 5 ай бұрын

I have a Shelter Logic one set up 4 years ago, didint use the provided anchors as the corners were in too rocky spots, did set the frame on 5x20cm beam/balk to lift it up alittle and was easyer to level and square it out. plus could anchor it from that in any place i wanted, wind it not a major issue as it sits behind bigger structure to cover most of the heavy winds, the sun indeed have eated up the cover, sides are ok, on top i did lay a load cover, as one part have ripped, not sure im conna get a new cover, meybe install roofing sheets instead, did manage do find a 2nd door, so i can open up front and back the same time, that is quite nice

@greatbay1961 5 ай бұрын

the texas sun ruined mine real quick less than a year, cost more to try and keep the thing held down maybe good for temp shelter but other than that just build something from wood your putting good money to bad.

@72plyduster1 5 ай бұрын

I have a shelter logic shed that I have had for five years two things I did I purchased 2x6 for the shed to set on then anchored the 2x6 to the ground with re rod then naturally anchored the shed tubing to the 2x6, As far as the door I put a pice a pvc tubing in the bottom of the door then it is easy to roll up when you open it.

@Hefty54 5 ай бұрын

Hows the UV protection over the years? I bought a 12x12 gazebo and the roof rotted out in one year from the sun UV what a waste of money. So we bought a 12x12 gazebo from Cosco's oh and the cost was higher but its been up four years now metal roof all cedar uprights still going strong.

@utubota5522 6 ай бұрын

I have experience with both HF and Shelterlogic. I have a pile of broken frame parts, and deteriorated covers from HF. The frames fold under wind load, and as others have noticed, the material is subject to UV deterioration. I paid the higher price and bought the heavy duty frame from SL. The SL has withstood several years of wind storms and snow load. Considering the limited life of the HF, I think my SL has proven to be a better value over time. I received a wrong part from SL, and they immediately replaced within a couple of days, I am glad that others have had good luck with HF; my experience was different.

@benbaggen2375 6 ай бұрын

They make the price more on the smaller one, that way your more inclined to buy the bigger one. So you "get your moneys worth" its just a tactic to make you buy the bigger one

@jammin1984 6 ай бұрын

Really good video and I was thinking about buying the Harbor Freight shelter. Not sure if anyone mentioned this, but I would use heavy duty T-Post to anchor mine down. I used them for pop-up gazebos and they stay put. Plus you can attach ropes or wire to give the top support as well. Thank you for the good video!

@vonSchwartzwolfe 6 ай бұрын

I've had my HF set up and bolted to the ground for 5 winters here in Northern NY state. Still kicking.

@garywheeler7039 5 ай бұрын

They hate the california sunlight and heat though. UV sunlight breaks down the plastic tarp material after a year or two, it becomes very easy to tear. I'd suggest aluminum paint. The silver blocks the sun quite well. Titanium white is not bad either lets indirect light in. Latex type. The homeless learned that even a huge cardboard box pained well stands up to weather fairly well.

@NoOneIsGoingToSaveYou 6 ай бұрын

Have had my Harbor Freight Shed for 2 years now with multiple winds storms winds gusting to 50 mph. It has stood up very well. I have it anchored to 6" x 4" Timbers that run the perimeter of the shed. It has dulled in the sun but other than that so fat so good.

@pitviper7924 6 ай бұрын

The weather resistance of the material is what I would be concerned about. Cheap, but falls apart from UV and weather, not a good investment.

@rongray4118 6 ай бұрын

The comparison to solar panels... loved it! BUT - I would love to have a generator like that in Northern Nevada!

@bazenga82 6 ай бұрын

The massive price increase of the Shelter Logic is ridiculous. Gotta love this economy we're living in... If we could get the leaders of the country to put America and it citizens first, wouldn't that be breathe of fresh air. Nice video by the way, thank you.

@katherinekelly5380 5 ай бұрын

According to a NY Times article, 80% of the price increases we are seeing is due to ‘greed-flation’ and record breaking corporate profits reflect this - I’ve decided to buy only absolute necessities this year, really limiting any prepared food and eating out as well

@scotimotti 5 ай бұрын

Put America first when Shelter Logic parts are manufactured in China and put together as a conglomerate product in different countries all around the globe...and HARBOR FREIGHT is 98% Cheap Chinese Junk... But yeah you go ahead and preach your patriotic bullshit...what a fucking joke

@victorsears9964 4 ай бұрын

The leaders of this country have almost no effect on corporate greed that is the real reason everything costs so much. But GOP totally supports corporations and corporate welfare. So careful who you blame!

@ajsemtb 6 ай бұрын

Thank you! This video could be edited down to 5-10 minutes, BUT as I am overgrown with honeysuckle and trying to figure out how to deal with the stumps, your demonstration confirmed that a 1 ton cherry picker would be insufficient. And that's exactly what I wanted to know! So thank you for putting this out there.

@ajsemtb 6 ай бұрын

* and I did watch all the way to the end. :)

@bradmaas6875 6 ай бұрын

HF now sells a 12X20 garage.

@gijoecowboy 6 ай бұрын

But the tarp only last a year! That sucks!

Ең жақсы KZfaq

Пікірлер