Bosrun

Пікірлер

@shirine2641 2 күн бұрын

Hi, I couldn’t trim the box from extrude polygon !how you can do on a video.

@samsabelash1513 3 күн бұрын

Hello, why when I try to import a model from Grasshopper into Blender I get an empty and flat cavity

@waruiotoko378 13 күн бұрын

can you use image mapping on this one?

@waruiotoko378 14 күн бұрын

thank you for this tutorial. hope you can make more with voice over and step by step tutorial.

@willknowsright9615 Ай бұрын

That was interesting....thank you

@gregsanter4578 2 ай бұрын

Awesome video. Worked great.

@NehemiasVargasOrellana 2 ай бұрын

The project is interesting, thanks for the video, it was very helpful to me🙌

@yaolong7823 2 ай бұрын

@arjunsahdev3962 3 ай бұрын

Hi I followed the video but at 7:54 , your model extruded but my extrusion says Cannot Export Brep geometry. Is there any solution for that

@gabrielribeironepomuceno5770 3 ай бұрын

What did you type in that panel????

@baileywallace8701 3 ай бұрын

Is there any way to flow this along a current path I already have made?

@karenzamora7226 4 ай бұрын

Doesn't work when I try to connect the two MD sliders, only one connects

@georgeonwudebe4701 3 ай бұрын

hold shift while you connect

@johnman5333 5 ай бұрын

how would i be able to make the wall wavy with the image on top still

@gullibleboar3511 7 ай бұрын

Come si esportano i disegni 2d dal modello, così da poterli tagliare

@gabrielribeironepomuceno5770 3 ай бұрын

kzfaq.info/get/bejne/Y5-Ee6yWuZa-dIE.html

@user-gh1gx5jn5r 9 ай бұрын

even your files don't work is there something i'm missing

@user-gh1gx5jn5r 9 ай бұрын

Hi I had a problem at 0:29 when I add the move it pushes it upwards

@Josetrillo600 9 ай бұрын

El archivo que esta colgado en el link funciona muy bien, solo hay que ser cuidadosos en escoger el plano donde construimos la superficie inicial que debe ser el XZ, luego observar que en el icono de creación de rango o dominio colocar con click derecho una expressión de x-1 para igualar el numero de datos y al momento de crear la superficie en el ucount incluir una expresión de x+1. Lógicamente que esto no es una receta de arroz con leche, tienen que analizar las entradas y las salidas para entender lo que esta ocurriendo en el proceso.

@kalsterr 10 ай бұрын

This is insane keep it up, just learning grasshopper this slow walkthrough makes a super difference in understanding the thought process

@olivewang961 10 ай бұрын

Very helpful tutorial! But for the parts in 7:01 I use Rhino 7 and the polyline and mirror cannot connect to loft together

@shonimshaheen 10 ай бұрын

@olivewang961 I have the same problem, did you find any solution?

@olivewang961 9 ай бұрын

No, I still haven't@@shonimshaheen

@alexl.9907 8 ай бұрын

For me worked to instal plugin Weaverbird and use the node 'Weaver's tile'. Dirty but did the thing and the connected parameters are still affecting the geometry

@cyber_reverie 7 ай бұрын

Just use Shift when you connect second geometry@@olivewang961

@gregsanter4578 2 ай бұрын

In Rhino 6 you hold shift and make the second conection.

@razzakahmed316 Жыл бұрын

How do this design is mirror Letter are outside

@bosrun_lrm Жыл бұрын

Play with Remap Number, change the value of construct domain

@razzakahmed316 Жыл бұрын

@@bosrun_lrmI will try but not show letter out side

@lirunming7592 Жыл бұрын

@@razzakahmed316 it's work when you flop the value of domain start and domain end in construct domain of remap number.

@razzakahmed316 Жыл бұрын

Thanks you so much sir ❤❤🎉

@razzakahmed316 Жыл бұрын

Parametric embossed latter wall design plz

@afterethinq2788 Жыл бұрын

Niceeee

@bosrun_lrm Жыл бұрын

Thanks 🤗

@hopperblue934 Жыл бұрын

nice yah

@bosrun_lrm Жыл бұрын

Thank You

@theresacdc Жыл бұрын

what plugin you use

@bosrun_lrm Жыл бұрын

LunchBox, You can find it on Food4Rhino.

@marcobarberio6910 Жыл бұрын

I followed everything step by step but it doesn't work (I've Rhino 6 for Mac)

@bosrun_lrm Жыл бұрын

Sorry for some error in the video. Check the link below the video to get the files.

@marcobarberio6910 Жыл бұрын

Hi, how can I design these shapes on a cylindric/vase?

@jamikbuxoriy Жыл бұрын

the author of the tutorial is deliberately misleading and just wants to watch on the channel, in fact, he does not intends to teach someone although it may seem very simple. Just one question how did you trade your conscience for views

@malekmaster9426 Жыл бұрын

At 1:11 the point were on the top a second later they were on the side how did you do that?

@bosrun_lrm Жыл бұрын

Sorry for some mistake in the video. Check the link below the video to get the files.

@ebruyildiran1447 Жыл бұрын

Could you please share your grasshopper file?

@bosrun_lrm Жыл бұрын

Yeah, of course. Check the link below the video to get the files.

@RenzoIR144 Жыл бұрын

the tutorial is useless or incomplete, it happens that all the points go to one end and when creating the surface the computer freezes because of the number of points that went to one end.

@RenzoIR144 Жыл бұрын

what happens at minute 1:11? my points don't look like in the video

@bosrun_lrm Жыл бұрын

Sorry for some mistake in the video. Check the link below the video to get the files.

@atenafelezi3827 Жыл бұрын

love it

@bosrun_lrm Жыл бұрын

Thank you.

@MHagan0321 Жыл бұрын

Wow...very impressive! I'm a newbie and could watch your videos all day. Say I wanted to build this parametric design by manually cutting these shapes made out of wood (which I would bc I don't own a CNC), how would I go about creating the dimensions for each piece or element? Does this make sense?

@atallahahmed9983 Жыл бұрын

it will be much better if u remove the music and put ur voice explaining what u r doing , pleeaaase.

@bosrun_lrm Жыл бұрын

Yeah, Thank you

@marceloalessandro1359 Жыл бұрын

0la friend you provide these files in dxf for use cnc router 2030 . I will use 15mm mdf. what value of dxf file package for- reception desk panels wall shelves -

@marceloalessandro1359 Жыл бұрын

0la friend you provide these files in dxf for use cnc router 2030 . I will use 15mm mdf. what value of dxf file package for- reception desk panels wall shelves -

@user-es2dx3ml2i Жыл бұрын

Hi i seem to have an issue at 1:05 the points doesnt seem to appear at all and i cant make the wavy effect. would appreciate if you know what happened and how to resolve it . thanks alot :)

@bosrun_lrm Жыл бұрын

Sorry for some mistake in the video. Check the link below the video to get the files.

@the_architect101 Жыл бұрын

You are amazing....

@bosrun_lrm Жыл бұрын

Thank you

@souadjiwafaa8285 Жыл бұрын

Thanks 👍

@bosrun_lrm Жыл бұрын

You're welcome

@WenjingZhang-ny9wp Жыл бұрын

Awesome! Could you tell me where to download 'Remap+' plugin? Thx!

@bosrun_lrm Жыл бұрын

You can download it in ParametricHouse or from the Link below parametrichouse.com/series/

@behrouzghasemi4457 Жыл бұрын

Very beautiful

@bosrun_lrm Жыл бұрын

Thank you!

@behrouzghasemi4457 Жыл бұрын

Very exellllllllllllllent Thanks for all video toturial I'm from Iran You are the best in grasshopper

@bosrun_lrm Жыл бұрын

Thanks for watching!

@aaronjuettner Жыл бұрын

Hey, Tank you very much for your Tutorial! What happens at 1:11 ? I cant follow the step before the Graph Mapper affects the Points

@bosrun_lrm Жыл бұрын

Nothing is happened, it should be my editing skill is not so good. Don't worry, no step is missing just follow my steps.

@cL12388 Жыл бұрын

Hi, I encountered a runtime error "The UCount value is not valid for this amount of points." during creating surface from point, how can I solve it?

@timdonzon4660 Жыл бұрын

same error...

@bosrun_lrm Жыл бұрын

Watch the tutorial carefully and follow my step, and make sure that you are not miss any step. If it still has a problem, you need to make clear one thing as below. Surface from Points component is used to create surfaces from the 3D grid of points. “U”, on the Surface from Points component, specifies the number of points in the {u} direction whereas on the Divide Surface component, the “U” specifies the number of segments in the {u} direction. One segment equals to two points, two segments equal to 3 points, and {n} segments equal to {n+1} points. So, when you use the “U” value on Divide Surface component to connect to the “U” value on the Surface from Points you need to plus one (U+1) to match the UCount value. Hope it will help you. Thank you!

@behrouzghasemi4457 Жыл бұрын

EXELLLLLLLLLLLLLLENT THANKS FOR LEARNING GRASSHOPPER

@bosrun_lrm Жыл бұрын

😊😊😊

@DamianM_M Жыл бұрын

Great guide!

@bosrun_lrm Жыл бұрын

Thank you!

@youssefelshenteinawy992 Жыл бұрын

will you answer i have question how did you get to the first place

@bosrun_lrm Жыл бұрын

May I know more clearly about your question ?

@user-om4tk2jg9w Жыл бұрын

Impressive work. Thank you.

@bosrun_lrm Жыл бұрын

Thank you

@DamianM_M Жыл бұрын

I have hundreds of videos on Creating Parametric Shapes. But your tutorials beat it all. I have a question, is there any way to lay out each single element of this pattern on a 2D plane (each wall is spread out to a grid), so that you can print them yourself and, for example, create them from paper?

@bosrun_lrm Жыл бұрын

I will prepare it for the next video, thank you.

@DamianM_M Жыл бұрын

@@bosrun_lrm thank you very much! Again, great content!

Ең жақсы KZfaq

Пікірлер