Parametric Wall Design _ Grasshopper
Рет қаралды 20,956
Жыл бұрынIn this video we will use Rhino Grasshopper to create Parametric wall with Graph Mapper.
link to download the files
drive.google.com/file/d/1KDQO...
#grasshopper
#parametric
#archtecture
#pattern
#parametricDesign
#facade
#launchbox
#rhino7
#grasshopper
#rhino3d
#rhino_grasshopper
#parametric_design
#parametric_modeling
#algorithm_design
#computational_design
#parametric_architecture
#Bosrun
@Josetrillo600 8 ай бұрын
El archivo que esta colgado en el link funciona muy bien, solo hay que ser cuidadosos en escoger el plano donde construimos la superficie inicial que debe ser el XZ, luego observar que en el icono de creación de rango o dominio colocar con click derecho una expressión de x-1 para igualar el numero de datos y al momento de crear la superficie en el ucount incluir una expresión de x+1. Lógicamente que esto no es una receta de arroz con leche, tienen que analizar las entradas y las salidas para entender lo que esta ocurriendo en el proceso.
@marcobarberio6910 Жыл бұрын
Hi, how can I design these shapes on a cylindric/vase?
@malekmaster9426 Жыл бұрын
At 1:11 the point were on the top a second later they were on the side how did you do that?
@bosrun_lrm Жыл бұрын
Sorry for some mistake in the video. Check the link below the video to get the files.
@user-es2dx3ml2i Жыл бұрын
Hi i seem to have an issue at 1:05 the points doesnt seem to appear at all and i cant make the wavy effect. would appreciate if you know what happened and how to resolve it . thanks alot :)
@bosrun_lrm Жыл бұрын
Sorry for some mistake in the video. Check the link below the video to get the files.
@behrouzghasemi4457 Жыл бұрын
EXELLLLLLLLLLLLLLENT THANKS FOR LEARNING GRASSHOPPER
@bosrun_lrm Жыл бұрын
😊😊😊
@cL12388 Жыл бұрын
Hi, I encountered a runtime error "The UCount value is not valid for this amount of points." during creating surface from point, how can I solve it?
@timdonzon4660 Жыл бұрын
same error...
@bosrun_lrm Жыл бұрын
Watch the tutorial carefully and follow my step, and make sure that you are not miss any step. If it still has a problem, you need to make clear one thing as below. Surface from Points component is used to create surfaces from the 3D grid of points. “U”, on the Surface from Points component, specifies the number of points in the {u} direction whereas on the Divide Surface component, the “U” specifies the number of segments in the {u} direction. One segment equals to two points, two segments equal to 3 points, and {n} segments equal to {n+1} points. So, when you use the “U” value on Divide Surface component to connect to the “U” value on the Surface from Points you need to plus one (U+1) to match the UCount value. Hope it will help you. Thank you!
@youssefelshenteinawy992 Жыл бұрын
will you answer i have question how did you get to the first place
@bosrun_lrm Жыл бұрын
May I know more clearly about your question ?
@aaronjuettner Жыл бұрын
Hey, Tank you very much for your Tutorial! What happens at 1:11 ? I cant follow the step before the Graph Mapper affects the Points
@bosrun_lrm Жыл бұрын
Nothing is happened, it should be my editing skill is not so good. Don't worry, no step is missing just follow my steps.
@RenzoIR144 Жыл бұрын
what happens at minute 1:11? my points don't look like in the video
@bosrun_lrm Жыл бұрын
Sorry for some mistake in the video. Check the link below the video to get the files.
@user-gh1gx5jn5r 8 ай бұрын
Hi I had a problem at 0:29 when I add the move it pushes it upwards
@marcobarberio6910 Жыл бұрын
I followed everything step by step but it doesn't work (I've Rhino 6 for Mac)
@bosrun_lrm Жыл бұрын
Sorry for some error in the video. Check the link below the video to get the files.
@RenzoIR144 Жыл бұрын
the tutorial is useless or incomplete, it happens that all the points go to one end and when creating the surface the computer freezes because of the number of points that went to one end.
@marceloalessandro1359 Жыл бұрын
0la friend you provide these files in dxf for use cnc router 2030 . I will use 15mm mdf. what value of dxf file package for- reception desk panels wall shelves -
@ebruyildiran1447 Жыл бұрын
Could you please share your grasshopper file?
@bosrun_lrm Жыл бұрын
Yeah, of course. Check the link below the video to get the files.
@user-gh1gx5jn5r 8 ай бұрын
even your files don't work is there something i'm missing
@jamikbuxoriy Жыл бұрын
the author of the tutorial is deliberately misleading and just wants to watch on the channel, in fact, he does not intends to teach someone although it may seem very simple. Just one question how did you trade your conscience for views