Did you get round to installing the newly ordered shocks? Was looking at a 99s but now looking at the 82 as better out the box and cheaper but with new tyres. Then shocks like yours.
@BillsWorkbench19 сағат бұрын
I was able to get the INJORA 53mm Rear Shocks (amzn.to/3MaUTuw) and NJORA 59 mm Shocks (amzn.to/4fNvC78) to work. For the best action, I needed to use the metal front shock mounts and put the shocks in the hole towards the truck's rear. I have that video almost ready; I just need to capture a video of how it turned out.
@rhallmedia847312 сағат бұрын
@@BillsWorkbench I’m undecided on what to get…MN99s, 89, 82, 78, 168 etc. are all the older models just different body? Is only 99s they’ve changed chassis etc? I want one good out the box and just upgrade tyres and metal driveshafts for now.any help appreciated.
@BillsWorkbench6 сағат бұрын
@@rhallmedia8473 if you want something good out of the box get a TRX-4M or SCX-24. On your list the 82 is the best. I don’t have experience with the 168.
@Mauricio_EPMКүн бұрын
I will tell you my experience with the MN d90 and mn 82. I bought the Mn82 two months ago, then i bought the MN 90 a week ago. My 5 year old daughter told me . Papi, for you the yellow crappy and give me the Toyota. She dont want the D90, children know...
@BillsWorkbench17 сағат бұрын
She is right
@Mauricio_EPMКүн бұрын
The new MN 99s v2 have the same issues in the electronics and direction?
@BillsWorkbench17 сағат бұрын
No the Version 2 worked out of the box. The only problem was the power switch which was an easy fix.
@Mauricio_EPMКүн бұрын
Remote...? Very ..mmm "inexpensive feeling". 😂😂
@BillsWorkbench17 сағат бұрын
Pretty much!
@Mauricio_EPMКүн бұрын
Is what you said. Have a lot of potential and parts to upgrade, think, and have fun. I think it is more about that then having the super top model taking dust in the storage. I bought the Mn82 first. I like it but it is a car that works ok. This is more like that Project that has infinite ways and keeps your mind playing. 😉👌
@BillsWorkbench17 сағат бұрын
Well said!
@Mauricio_EPMКүн бұрын
Supper dupper video. I'm starting in the hobby and need This 🎉🎉
@BillsWorkbenchКүн бұрын
@@Mauricio_EPM It’s a fun hobby. The MN models MN99 is a great crawler or trail truck to tinker with. It’s not great out of the box, but it’s a good one to upgrade and see how much better or worse it makes it.
@Mauricio_EPMКүн бұрын
Very nice. I would like to use these hools to install a roll cage but the antenna looks Good 👍. Thank you for your content
@BillsWorkbenchКүн бұрын
That is a great idea!!!! I dislike that snorkel. I am going to need to look at making something. Hummm…….
@Mauricio_EPMКүн бұрын
Hey, 👋 Actually, This is a MN 98 not a 99s V2 isn't?
@BillsWorkbenchКүн бұрын
@@Mauricio_EPM You are 💯 correct!
@Canal04-y4l4 күн бұрын
RC J22
@BillsWorkbench2 күн бұрын
I would tend to agree the RC J22 is something.
@Canal04-y4l4 күн бұрын
RC J22
@BillsWorkbench2 күн бұрын
You bet!
@STipugpower4 күн бұрын
Soldered a 30 C battery and that’ll bump up your torque a bit… get rid of that 2C battery that you’re using
@BillsWorkbench2 күн бұрын
Yep that is what I did in the next video and it made a HUGE difference.
@flavioandrade68575 күн бұрын
This is best version?
@BillsWorkbench5 күн бұрын
@@flavioandrade6857 in the MN99 series I think so.
@Mauricio_EPM4 күн бұрын
What is the difference with the MN 98? 🤔
@CutteroParts8 күн бұрын
Thanks for the videos, they have helped in my build (especially figuring out what screws to use). Did you notice that the tierods and the camber links hit each other and don't allow the front arms to flex under steering? I am wondering if I just got the angles wrong some how.
@BillsWorkbench7 күн бұрын
@@CutteroParts I will have a video in a couple weeks when I tune the rolling chassis. Got to make it 😀
@_aman_sarkar9 күн бұрын
😮❤
@BillsWorkbench2 күн бұрын
Back at ya!
@eldavis154210 күн бұрын
What type of oil do you put in the crawler suspension?
@BillsWorkbench9 күн бұрын
With the Injora shocks, I use 20wt oil. In the shocks in the video, they don't hold oil. They are an aluminum version of the poor shocks that come from the factory. Get the Injorna ones. I have a suspension conversion coming to the channel soon.
@rustandoil13 күн бұрын
Injora axles, links and transmission?
@BillsWorkbench13 күн бұрын
Everything in this video is stock out of the box. I do have another video on the channel where I place the shocks and am working on one where I replace the transmission and axels and another that will fix the links.
@hobbykita519313 күн бұрын
Real and front link same or not?
@BillsWorkbench13 күн бұрын
@@hobbykita5193 they are a bit different. The top links are not as close together at the axel end. But the connection method where the screw strip looking at them wrong are still there.
@aces626218 күн бұрын
The switch being low to the ground also happened to me in the MN82, I was crossing over a tree root over and it shut off. I thought I blew up the motor or receiver or something but it luckily it was just that. Other than that, so I think there are 4 version of this thing now, the earliest non-porpotional with 130 motor, the non-propotional one with 260 motor, the propotional with 260 motor and now propotional with 280 motor..
@BillsWorkbench18 күн бұрын
You are correct. I think of all the versions this is the first big redesign. The other versions were just building on the same platform. This one has an entirely new frame, suspension, drive train, and the servo on the axel is a big one too. Luckily the switch is an easy fix.
@MysticRiverRC20 күн бұрын
I have the original MN99S, seriously under powered. My nephew melted the transmission running in the tall grass. I upgraded to the single speed metal one, and it is really noisy. But, at least it runs again. To shed weight, I installed the half cab roof. And I like the new bead-lock tires. They are more scale and look less toyish. Great review, and I love your indoor course! Liked and subscribed! Cheers!
@BillsWorkbench18 күн бұрын
Thank you, I agree the old one is underpowered. I change out the battery and electronics on the old version to a 2S Lipo (50C) and it made a big difference in performance but it runs HOT! The new one does have a larger motor, but the electronics are the same. I am liking the new tires, they preform better and look better. I have the metal gear box, I have yet to install or make a video on that. Coming soon! I hope to figure out how to make it quieter.
@RC3DPrintAdventure21 күн бұрын
Such a simple fix. Good job! 👍
@BillsWorkbench18 күн бұрын
Thanks! 👍
@RC3DPrintAdventure21 күн бұрын
Great review. Really nice to see the version 2 for the popular MN90. I had the same power switch problem with the MN128. 👍
@BillsWorkbench18 күн бұрын
My MN128 is not having that issue. But now that you said something I am sure it will :)
@farmoboy8322 күн бұрын
is there any way of upgrading the axle to use normal 12mm hex and nut?
@BillsWorkbench22 күн бұрын
There are a couple things to think about to convert from 5mm to 12mm. 1. Will the wheel and tire be too large for the MN99S? Most likely yes. 2. How will I attach the new wheel? Most of the spacers I see on amazon don't have a good way to mount the new wheel. 3. Unless you already have the wheels and tires that will fix, it may be cheaper just to get wheels and tires made for the MN99s. amzn.to/3SqNT04 4. If you have a 3D Printer there are plenty of STL files out there. www.wpl-rc.com/blogs/news/5mm-to-12mm-wheel-adapter-stl
@BillsWorkbench22 күн бұрын
Make sure to check out the review on Version 2 MN-98 / MN-99S. kzfaq.info/get/bejne/sJ-FoMh_stnHdGw.html
@BillsWorkbench22 күн бұрын
Make sure you check out the video on the EASY fix. kzfaq.info/get/bejne/qdyheZt8qMvZeWw.html
@coreyfuchs73023 күн бұрын
Some of these cheap rc vehicles seem like a waste of money😂
@BillsWorkbench23 күн бұрын
Yes and no. These are fun if you are looking for a platform to tinker with and break-fix-repeat. On the other hand, there are cheap RC vehicles that are indeed a waste of money. Hopefully, this is part of your pre-purchase research, so you know what you are getting into.
@suvsteve24 күн бұрын
Love a simple fix that's awesome 👍🏻😊😊
@BillsWorkbench24 күн бұрын
I was surprised how easy it was, I was prepared to file it down shorter.
@suvsteve24 күн бұрын
@@BillsWorkbench that would of worked to 😊
@Reqquiem127 күн бұрын
Is the car done yet? I would love to see it run on the Cosmic Track!
@BillsWorkbench27 күн бұрын
2 weeks…. I paint left. I better get working on it.
@yGustaSadzinn27 күн бұрын
i realy liked the new version, but i live in Brazil, i tried to buy, but is so expensive because of taxes, the item custs more than 50 dol, the price goes up 92%
@BillsWorkbench27 күн бұрын
The new version is a nice upgrade. Man 92% is a bit difficult. Maybe the MN82 is within reach. It’s a nice little truck as well. Lots of upgrades and tinkering on that one too.
@yGustaSadzinn27 күн бұрын
@@BillsWorkbench yes, its a nice option, but, i have one
@BillsWorkbench27 күн бұрын
@@yGustaSadzinn WPL is next on my list of cheap crawlers to try out.
@yGustaSadzinn26 күн бұрын
@@BillsWorkbench yes!! i have 2 wpl's, i love wpl models, one question friend.. the new mn99 can be updated to 370 2 speed motor??
@BillsWorkbench26 күн бұрын
@@yGustaSadzinn It already has a larger motor, not quite the 370. The gearbox and mount is different as well as the location of the drive shafts. Based on that I would say no. You would want to wait for their new versions of 2 speed transmissions. I have noticed that by changing out the battery to a LiPo 50c pack I got a bunch more low end power, but the top speed did not change.
@suvsteve28 күн бұрын
Great unboxing review 😊
@BillsWorkbench28 күн бұрын
@@suvsteve Thank you! After I found the fix for the flaw, it’s a nice little truck. Video coming this week with the easy fix.
@MikeFigurasEc28 күн бұрын
Bonito video
@BillsWorkbench28 күн бұрын
Thank you!
@r.a.wrcfootage551129 күн бұрын
That esc gets really hot and catches on fire 🔥 I wouldn’t use it.
@BillsWorkbench29 күн бұрын
Thank you for the heads up. I plan on upgrading it to a brushless motor soon and a larger ESC. Stay Tuned!!!
@r.a.wrcfootage551129 күн бұрын
@@BillsWorkbench just trying to save one rc at a time. 👍🏿👍🏿
@BillsWorkbench29 күн бұрын
@@r.a.wrcfootage5511 and forest fires! 🔥
@_aman_sarkarАй бұрын
Keep it up
@BillsWorkbenchАй бұрын
@@_aman_sarkar already got the next one scheduled. Shocks are next.
@tracydavis96Ай бұрын
Too much thought..just order shocks..
@BillsWorkbenchАй бұрын
I tend to overthink and over share. I did get some new Injorna shocks. Just need to get them installed, and the video edited. Stay tuned.
@redewenur1984Ай бұрын
What weight oil would you recommend to fill with?
@BillsWorkbenchАй бұрын
@@redewenur1984 I use 20wt oil.
@redewenur1984Ай бұрын
@@BillsWorkbench thanks for reply
@SandeepMohammedAliАй бұрын
I got the same one, looking at updating the motor tho... it really whines down
@BillsWorkbenchАй бұрын
I was thinking of using a commercial sewing machine motor. I have not had the time to get and try one.
@SandeepMohammedAliАй бұрын
@@BillsWorkbench yeah, I was just looking at a forum where someone did just that. an industrial sewing machine motor with controller. interesting stuff...
@BillsWorkbenchАй бұрын
I have an update video where I find better shocks. kzfaq.info/get/bejne/gLWAnNKIy5eZZGg.html
@fernandosaraiva8449Ай бұрын
Are this shocks good?
@BillsWorkbenchАй бұрын
No the ones in my other video are better. MN Model MN128 with SCX10 Shocks. kzfaq.info/get/bejne/gLWAnNKIy5eZZGg.html 70mm Injora RC Shocks: amzn.to/3TorJuQ are the better ones
@BillsWorkbenchАй бұрын
The Tires I used are from Amazon: amzn.to/4cUOLSZ and are Approx. 70mm/2.8inTire Width: Approx. 24mm/0.9in.
@BillsWorkbenchАй бұрын
If you need the printed parts I have them on my Esty store: www.etsy.com/listing/1761827863/mn128-trailing-arm-extensions-and-servo
@SinatraOfficial30Ай бұрын
Hi, This is a great video on how to make axle little bit longer to fit bigger tires. I have some questions though, in the video you mention that you use different servo (a bit smaller) What servo did you use? And if I want to use a stock servo or metal servo with same size as stock 25g, how to adjust the servo mount? Sorry I still new in this, since I don't have any experience in 3d printing and Need to order to guy who has the 3d printer Thank you for your response Edit: Turn out the servo mount design was modular, so it can fit stock servo size (sorry for not read the description) Anyway thank you so much for your effort, really appreciate it
@BillsWorkbenchАй бұрын
It looks like I have the stock servo still in the MN128. The servo I was thinking of using was a MG90S which is a bit smaller. Looking at the 3D file posted on printable (www.printables.com/model/737691-mn-128-trailing-arm-extensions-and-universal-servo/files) they are for the stock servo. If you are still using the stock steering linkage then the stock servo will be fine. The plastic linkage will act as your servo saver. If you upgrade your linkage to the metal linkage you will also need to upgrade your servo. With all that typed, you should be good to go printing what I have in printable, use the stock servo and servo linkage and get a M2.5 screw kit. amzn.to/3wlhLms
@BillsWorkbenchАй бұрын
I just opened a Esty shop where you can purchase the 3D printed parts. www.etsy.com/listing/1761827863/mn128-trailing-arm-extensions-and-servo
@yaucisnАй бұрын
Are the additional springs less thick or are they the same ?
@BillsWorkbenchАй бұрын
The additional springs have a different spring rate, I don't not remember if they were harder or softer. But I did end up experimenting with the different rates to find a good balance with the battery I am using. The battery I am using is heavier than the stock, so that will play into the tuning as well. Overall I am happy with the 70mm shocks. It's much better than stock and better than the cheap leaky ones.
@yaucisnАй бұрын
@@BillsWorkbench I see that even though they are oil shock absorbers, I see them as somewhat hard, and I think it is because of the springs, which is why I wanted to know if the other additional springs were softer to mount those on them.
@BillsWorkbenchАй бұрын
@@yaucisn I understand your question. I really don't remember if I put on the stiff or soft or a mixture. All I can offer is that I am happy with 20wt oil in them and one of the sets of springs that came with the kit.
@billiwhizz221Ай бұрын
where can you buy spares for this "red spider"? £57 from where?
@BillsWorkbenchАй бұрын
@@billiwhizz221 I got my kit from AliExpress and it’s an almost 100% clone of the Mini-Z. I would guess that the Mini-Z parts would fit.
@s737500Ай бұрын
Looks like the esc is shutting down beacuse of overcurrent draw. Have you tried to run it in ? Just drive it around a full battery or two just to loosen it up, and break in the motor ? The control board might just be faulty too. I have one of these in the mail on the way :-)
@BillsWorkbenchАй бұрын
I swapped out the radio/ESC for the one in the MN82 and it worked like a charm. So it must be the electronics module. This last weekend I swapped out for a RadioLink receiver and a cheap ESC. (Video coming soon) It does seem to be working better, it is still "under powered" as it stalls. I don't think it's the replacement ESC because it will get over if you give it full power. The old electronics module would not do that. With that said. The MN99S platform is a nice little platform if you like to tinker and upgrade. I plan on getting my 3D printing skills up to the task and make some modifications that will hopefully get this little guy up and running like a champ. I have lots of plan for this crawler. I am interested to learn how yours performs. Please let me know.
@lootedgravel3283Ай бұрын
I just got the yellow one and have a first edition red still in pack. Such an awesome car.
@BillsWorkbenchАй бұрын
It is one of my favorite Matchbox cars. It was fun to bring that one back to life.
@alpinerc1295Ай бұрын
Have fun with the Orlandoo truck build 😁 I did one already and it was the most detailed, interesting build but also the more difficult and time demanding that I even done in RC.
@BillsWorkbenchАй бұрын
Thank you. It looks to be a fun one. I plan on getting the lighting and such working on this build. It looks like finding a place to put the electronics and battery will be challenging. Did you have issues finding space, or am I overthinking it?
@alpinerc1295Ай бұрын
@@BillsWorkbench I did a custom 3D resin body on mine and did not have any issue to fit all the electronics inside. D4L ESC and light system + sound modul. For what I seen about this kit, there is enough room for everything even with the Scania body.