How did you get the pinion onto your brushed motor? It seems like the motor shaft isn’t long enough to put on the stock pinion?
@rctamiyaaddict4687Күн бұрын
If I remember rightly, the teeth of the pinion are closest to the motor. Unlike any other pinion I’ve fitted. Hope that makes sense.
@FastFreddyRCКүн бұрын
@@rctamiyaaddict4687 it does. I turned the pinion around but the shaft isn’t long enough so the grub screw has nothing to bite into.
@rctamiyaaddict4687Күн бұрын
What motor is is? I used a super stock as a standard sized motor like a sport tuned won’t fit because of the shaft ( I think )
@pattyofurniture56742 күн бұрын
Looks great 👍
@rctamiyaaddict4687Күн бұрын
Thank you! Cheers!
@WorkInLight3 күн бұрын
Get a TT-02 D kit and get ball bearings, a motor heat sink, oil filled dampers, sport tuned motor, probably more, and all for a reasonable amount more. I bought one and decided to get another and make a touring car from that kit rather than a TT-02 standard kit, I have some good road tires and now have spare drift tires too. Look into it, just not many bodies for the chassis option though. I like getting extra bodies too though for the few chassis I have, painting is part of the fun. Enjoy following your progress and will be making my own TT-02 journeys also buying pinion gears and spur gears myself now.
@rctamiyaaddict46873 күн бұрын
Thank you for watching and the time for your comment. Think I’ll be sticking with the 3 I have now.
@WorkInLight3 күн бұрын
@@rctamiyaaddict4687 That's what I thought till I saw a TT-02D on sale with the R32 Skyline body I was after. Enjoy, lot's of fun to be had.
@Particular_Sky3 күн бұрын
Major problem is the gear ratio on a TT is way too low for speedruns. Most you can get out of the mod 0.6 pitch is 5,74 FDR with 64/29 combo. Thats great for a 17,5 blinky but nowhere near what you need. Do yourself a favor and switch it over to a 48 pitch with the yeah racing slider motor mount. HRC black delrin spurs are bolt on to the tamiya high speed spur holder. If you want a daily 48 ratio kimbrough 301 66/24 with 2 extra holes to mount it. That gives you a FDR of 7,15. That's fine for the box stock torque tuned or hotter brushed can. My final drive ratio was 4.4 with a 60/35 48 pitch and a hole in the spur cover to hold such large gear. On top a F540 4370kv on 3s. That was good for 60 mph+ Number for said spur gear is HRC 74860 LW for the 60 48dp and Kimbrough KB301 for the 66 48dp
@rctamiyaaddict46873 күн бұрын
Wow. Some great advice there, thank you. Do want to explore the different gear sets, moving for 06 to 48.
@333UNLUCKY3 күн бұрын
What is hrc stand for?im trying to figure out what company your talking about lol
@Particular_SkyКүн бұрын
@@333UNLUCKY HRC is the brand. There is others by 3racing. The white spurs have turned out to be less durable. Black delrin is what you are looking for. Making new holes isnt a big deal with a body reamer and a 2mm steel drill bit.
@333UNLUCKYКүн бұрын
@@Particular_Sky thanks for the info
@enricomiceli55174 күн бұрын
The carbon upper deck and battery holder are useless upgrade as much as the carbon fiber bumper holdef. Alu steering linkage, high torque servp saver, alu propeller, oil shocks and adjustable arms are the best ipgrades u need. If u want to compete oil diff and cvd is not a bad idea, it is just a very expenaive set and , forthat price, j qould get some higher end car
@rctamiyaaddict46873 күн бұрын
Hop ups are a rabbit hole. That’s what the project was all about, seeing if they did any good
@FastFreddyRC4 күн бұрын
Awesome! I'm finally going to enter the challenge this year so I'm pulling everything together that I need for this...awesome!
@rctamiyaaddict46874 күн бұрын
Excellent. I’m sure you’ll do a lot better than I will. Good luck with it.
@FastFreddyRC4 күн бұрын
@@rctamiyaaddict4687 not necessarily!! lol - I’m not going crazy but I am getting a different motor for sure. I’ll be putting out a couple videos soon and will reveal the upgrades I’ve chosen once they arrive. Best of luck to you too!
@rctamiyaaddict46874 күн бұрын
@FastFreddyRC thanks. I’m not going crazy on this, been working on my TT02 project, that’s where my cash has gone to.
@FastFreddyRC4 күн бұрын
@@rctamiyaaddict4687 yep…I have a lot of projects on the go and don’t seem to get around to finishing them lol - now with deciding to participate in the speed run challenge I need to focus on this for August. I don’t expect to win but I’m excited just to finally be a participant.
@aviano724 күн бұрын
Some very nice upgrades there. A hopped up TT02 feels so much better imo 😇 I have upper deck from Fibre-Lyte in UK 👍
@rctamiyaaddict46874 күн бұрын
Very nice!
@ken_tx4 күн бұрын
People new to Tamiya will never understand they will reproduce like rabbits 🐇 Good luck on the 01X challenge!
@rctamiyaaddict46874 күн бұрын
Thank you
@Geo_art_RC4 күн бұрын
I would like to put the carbon upper deck on mine. Did you get it from JK-RC? Also, I love the Tamiya rally cars, I have a few myself but I really want an Escort cosworth like yours. Stunning looking car!
@rctamiyaaddict46874 күн бұрын
Bought the upper deck from eBay and the Cosworth shell again off eBay through a supplier called Kamtec. They also have website.
@davidkredow14215 күн бұрын
BTW it helps to remove the front bumper to work on the servo arm.
@rctamiyaaddict46875 күн бұрын
Thank you.
@davidkredow14215 күн бұрын
I had several comp grade crawlers and I find this CC-02 (73 Bronco) the most fun on the trail, even more so thany SCX10. So why spend the money for a steering link when the stock one works well, I did replace the plastic drag link with an Axial 98 tune (green anodized) with Axial (Traxxas) rod ends which I have plenty in my parts box. Works great and no bump steer
@rctamiyaaddict46875 күн бұрын
Yeah steering was fine as it was but just needed to scratch that rc upgrade itch, plus it gave it some more additional weight.
@Acheronus806 күн бұрын
West Sussex here too, near Burgess Hill... Need somewhere to speed run i can get to on public transport!
@rctamiyaaddict46875 күн бұрын
I have the seafront, nice and straight, but have to go early before it gets too populated.
@Acheronus805 күн бұрын
@@rctamiyaaddict4687 and only 2 and a bit hours from me by train.... Might pop down when the kids are back at school 😉
@BrunkleDrew7 күн бұрын
Feel for ya. Thanks for sharing. I avoid white like the plague.
@rctamiyaaddict46875 күн бұрын
I hate painting white
@gottfriedrc7 күн бұрын
Great build 👍🏻
@rctamiyaaddict46877 күн бұрын
Thanks 👍
@SRG-HITMAN-117 күн бұрын
Should of saved your money lol
@rctamiyaaddict46877 күн бұрын
I think you’re right!
@PeteWylieRC7 күн бұрын
Hey nice build. Yeah this kit is a bit wibbly wobbly in places like you say. I don't think it's very fast out of the box and it's a bit all over the place so the contest will be tricky. I look forward to seeing how you get on 😁👍👍
@rctamiyaaddict46877 күн бұрын
Think I’ll be firmly at the bottom of the leaderboard. 😆 thanks for taking a look.
@SRG-HITMAN-117 күн бұрын
Adams playground over 50mph so far but not sure gps is correct so ordered new one
@rctamiyaaddict46877 күн бұрын
Jack o trades is doing quite well with his.
@Gernotrametsteiner-dl6ns7 күн бұрын
❤👍👏🔥😎👑🤩🏆🤣coool
@rctamiyaaddict46877 күн бұрын
Thank you.
@Paul__FC7 күн бұрын
Looks great.
@rctamiyaaddict46877 күн бұрын
Thanks
@helixworld10 күн бұрын
Fantastic looking beetle.. I love it!
@rctamiyaaddict46879 күн бұрын
Many thanks!
@rivierarc10 күн бұрын
Late to commenting but that looks the business ❤
@rctamiyaaddict46879 күн бұрын
Thank you
@PeteWylieRC10 күн бұрын
Hey you've done a lovely job on that 👍👍 Good luck with the contest 😁
@rctamiyaaddict468710 күн бұрын
Thank you so much 😁
@RogerWeidemann10 күн бұрын
Where about’s is this? I didn’t know it existed, near the park?
@rctamiyaaddict468710 күн бұрын
Selsey on the seafront
@JoevsRc11 күн бұрын
Great colors!
@rctamiyaaddict468711 күн бұрын
Thank you! Cheers!
@RogerWeidemann11 күн бұрын
Where about’s are you based? Looks like Bognor Regis?
@rctamiyaaddict468711 күн бұрын
It does, doesn’t it
@SRG-HITMAN-1111 күн бұрын
Where you buy body?
@rctamiyaaddict468711 күн бұрын
It came with kit
@MarkBryanRC11 күн бұрын
Great job on the body, those stickers made it pop! Lots of luck on the challenge! 😎👊👍
@rctamiyaaddict468711 күн бұрын
Thanks! You too!
@powersmodelgarage12 күн бұрын
Looks awesome. Wishing you great runs and lots of fun 👍
@rctamiyaaddict468711 күн бұрын
Fingers crossed!
@poorboysrc12 күн бұрын
Good looking body, now let's get it going fast! :)
@rctamiyaaddict468711 күн бұрын
Working on it!
@Paul__FC12 күн бұрын
It looks fantastic!! I'm happy to see you I this. Best of luck!!!
@rctamiyaaddict468711 күн бұрын
Thank you so much!!
@iainlee468012 күн бұрын
Looks awesome mate!
@rctamiyaaddict468712 күн бұрын
Thanks a ton!
@TheOttomann6412 күн бұрын
The stickers makes the colours look great!
@rctamiyaaddict468712 күн бұрын
I think so too!
@allanritchie153912 күн бұрын
@@TheOttomann64 What we need is Go Faster Stripes, and plenty of them.
@BigDumbMeRC12 күн бұрын
looks great! best of luck
@rctamiyaaddict468712 күн бұрын
Thank you!
@allanritchie153912 күн бұрын
Nice paint job, loving the colour scheme you got going on there. I'm struggling with the rain up here can't get any painting done yet and there's not a lot of spares for this chassis in Wheelspin Models, all the main bits are sold out and it's only going to get worse. Got the car sort of built waiting for the bearings to come soon I hope. Good luck with the SRC, it's going to be a fun one for sure.😊😊😊
@rctamiyaaddict468712 күн бұрын
Thank you. Yep, if it gets damaged I think it’ll be game over for me. Think I’ll probably be near the bottom like last year. Good luck to yourself.
@allanritchie153912 күн бұрын
@@rctamiyaaddict4687 You never know what's going to happen it's all down to the setup really.
@Geo_art_RC12 күн бұрын
The body looks well!
@rctamiyaaddict468712 күн бұрын
Cheers.
@WigglesTTH13 күн бұрын
All you had to do was recalibrate the esc 🤦🏻♂️
@rctamiyaaddict468712 күн бұрын
How is that done? Keeps getting mentioned but what’s the process.
@WigglesTTH12 күн бұрын
@@rctamiyaaddict4687 what ESC are you using?
@rctamiyaaddict468712 күн бұрын
THW-1060-RTR
@Particular_Sky3 күн бұрын
1060 has no calibrate. Its auto endpoint set every time you turn it on
@poorboysrc15 күн бұрын
Lovely to see you back in the 2024 SRC!
@rctamiyaaddict468715 күн бұрын
Thank you Fil. Good luck sorting through all the entries. Looks like a big one this year.
@bradkalman235315 күн бұрын
The three m red things you saw our double sided sticky tape.
@rctamiyaaddict468715 күн бұрын
Yeah guess there to hold down the esc and receiver. Just ain’t seen that design before in the kit. Didn’t know if the shop threw it in.
@bradkalman235315 күн бұрын
@@rctamiyaaddict4687 And someone tamiya kits have it.
@bradkalman235315 күн бұрын
Have you seen the hornet Evo?Are you going to get one?
@rctamiyaaddict468715 күн бұрын
I like the look of it but probably not. I’ll stick with the one I already have.
@bradkalman235315 күн бұрын
It's 90% different.Why would you not want to try it?
@rctamiyaaddict468715 күн бұрын
I have the BBX and hornet so another buggy isn’t what I’d go for next. Not sure what I would buy next. The only one I’ve bought this year is the MF01X and that just for the challenge.
@JoevsRc15 күн бұрын
Good Luck!
@rctamiyaaddict468715 күн бұрын
Thank you
@JF-RC15 күн бұрын
Hey, difficult to comment on, without being in front of the car. But you mentioned moving the timing of the motor, that will impact top speed without a doubt. Also you mention having to reverse the throttle using your transmitter, you could leave the transmitter setting as standard and simply switch the wires from the motor to the ESC. Check your transmitter for the end point limit adjustment, also your ESC, you might need to go through the throttle calibration sequence, hope to see some improvements for you 😊😊best wishes 😊
@rctamiyaaddict468715 күн бұрын
Thanks for taking your time to comment, some great advice there. Hopefully I’ll getting running smoothly again soon.
@MarkBryanRC15 күн бұрын
Hi Ian. looking forward to see what you do with this car, best of luck out there on the speed runs! 😎🏁👍
@rctamiyaaddict468715 күн бұрын
Thanks Mark, you too!
@Rcprescription15 күн бұрын
Awesome video! Hopefully my kit will be here this week! Good luck!🤜🤛
@rctamiyaaddict468715 күн бұрын
Thanks! You too!
@rivierarc16 күн бұрын
Looks like Fil has his work cut out this year with the amount of channels already joining in. See you near the bottom of the leader board 🤣
@rctamiyaaddict468715 күн бұрын
I’ll be there…. waiting 😂😂
@madsrcbuggy16 күн бұрын
Great stuff, buddy, I just subscribed so I won't miss your speedrun! I saw you posted to the group, but this was KZfaq suggesting I watch the video this time. Have fun with the challenge, I'm in brushed as well, perhaps we can battle for last, ha ha! Or probably lower middle is where I will end... I just counted, I have 4 RC car challenges going this year, so I got plenty, ha ha... But as you say, they are so tempting...
@rctamiyaaddict468716 күн бұрын
Not sure I’m going to do much better this year but I’ve been working on my TT02 speed car so hopefully I’ve learnt something. Good luck.
@scaleworksRC16 күн бұрын
Nice!
@rctamiyaaddict468716 күн бұрын
Thank you.
@reitplace476516 күн бұрын
Nice great to see all the entries..
@rctamiyaaddict468716 күн бұрын
Thanks. Looking forward to it.
@msfunracer16 күн бұрын
Great to see you again in the Challenge. Have fun and get good results 🤩
@rctamiyaaddict468716 күн бұрын
Thanks so much! 😊
@TeamJunkYardDog16 күн бұрын
Glad you entered and Great Luck!
@rctamiyaaddict468716 күн бұрын
Thanks! You too!
@lo271316 күн бұрын
Nice to you decided to hoin in the fun 😁 i still need to save up for the kit. Hopefully i’ll be running later next month 🤞