I hybred pinch butnit still bugs one of my fingers
@DonTimmons-kh4dz8 сағат бұрын
July 2024, I've had mine about 10 days now and it seems your's is doing better than mine. I wouldn't recommend this plane to a beginner either!
@user-sh2om7zz9c11 сағат бұрын
What esc are you using?
@cannuck12312 сағат бұрын
Really poor tutorial
@gregorydahl23 сағат бұрын
Put a single hoop prop gaurd on the prop tips. Get rid of the frame gaurds .
@gregorydahl23 сағат бұрын
Put cooling fan 3d printed motor fan on motor to cool motors . It can if it doesnt melt too
@gregorydahl23 сағат бұрын
Inreally came to ask about your folding props on the folding baby ape new to me drone
@gregorydahl23 сағат бұрын
2 bladed props less pitch faster rpm uses les energy might be less heat . Insulated motor mounts . And put cooling fan blade flaps to force more air through the motor . Hmmm
@TheBaconKing3223 сағат бұрын
Buliding a tank from scratch and learning this is the hardest part, lol
@RWaardenКүн бұрын
Great video, thanks for the info and the delivery! Was really looking to understand more about batteries (hope to see that Li-Ion video you mentioned, check out the difference and see which to go with for my needs), voltage and all you went through. Wanted to get over the fear with batteries so I can get myself a proper FPV drone (currently running the DJI Avata) and this helped a lot! Thanks!
@fairvalues4510Күн бұрын
Is it possible to just change out the esc? I'd like to use the original dji fc with a third party esc for more powerful motors. Thanks.
@RCwithAdam1Күн бұрын
Haven't tried it, but I doubt it, since the fc and esc board are paired together (which makes even swapping oem escs complicated). But it's worth a shot maybe.
@fairvalues4510Күн бұрын
Adam, is it possible to just take out the esc and put in one that can handle stronger motors? I would still like to use the mini pro 4 fc.
@TimothySimpson-qf1xk2 күн бұрын
This is cool man.
@TheIncocognito2 күн бұрын
dosnt work, it just only option for coonecrion via blue tooth, no usb!!
@livingroompickersclub63582 күн бұрын
I'm going to try that. As far as the launch anybody who owns the are mavic 2 knows it does not launch anywhere near that speed.
@davelawday66093 күн бұрын
Thank you ❤
@AckzaTV3 күн бұрын
Why dont they do night laser tag
@Rocketman04073 күн бұрын
So I can solder on a servo plug on the battery and connect it to the PWM? Would like to avoid adding an extra battery
@Seffy_assetto4 күн бұрын
Are u able to use like a phone to connect to it?
@DG-kq8zf4 күн бұрын
The imagination that goes into some of these builds is incredible. Thanks!
@MagTheFrag5 күн бұрын
Cool project! A material like PC-CF would be a better option compared to PLA-CF, however, I assume that you are using PLA for ease of printing and material cost during prototyping. I noticed that the ducts are a part of the frame itself, have you considered making them removable/non structural? If you did you could try printing them out of a light weight PLA material like they use for 3D printed airplanes, that way they can be swapped out when they break and also save some weight. Bracing the motor arms together would help greatly with the overall stiffness, but would add a considerable amount of material/weight. For 3D printed parts perimeters are what will make up the bulk of the parts strength, I would try to avoid using infill where possible to save weight as it doesn't translate into stronger parts as effectively as perimeters do.
@RCwithAdam13 күн бұрын
Thanks for the suggestions! I've been wanting to experiment with lightweight PLA. Good idea.
@IndraKurniawan-vk2qb5 күн бұрын
Is that 3d printed standoff lighter than plastic one? is that M2 screws that you're using?
@RCwithAdam15 күн бұрын
Standoffs are 3D printed in the same PLA-CF. Yes for M2.
@IndraKurniawan-vk2qb5 күн бұрын
I usually put some thin carbon fiber plate on all of my 3d printed motor mount to isolate the heat from melting my pla. My motors often reach 100 degree C, so i've tried using bare PTEG. Still no luck. so yeah,put some isolation
@IndraKurniawan-vk2qb5 күн бұрын
Oh yeah, also don,t forget to put some ring on those screws, the screws can got hot also
@twilightcompanion5 күн бұрын
thank you for this! I was worried I'd have to shell out for a PC laptop, glad I don't have to!
@nilabnath63185 күн бұрын
why salty water , take normal water
@RCwithAdam15 күн бұрын
The ocean is salty
@jcameron25546 күн бұрын
About time i found a video on how to bind the FS-i6 transmitter to the older type FS receivers. Successfully bound the transmitter and reciever in video withing minutes of watching this vid. Thank you, just what was needed. Ps picked up x2 of the same receiver's for less than £5 each which will be going into my fishing and sailboat 😊 no need to spend the £16-£20 on the more advanced version.🎉
@donmichaelcorbin44176 күн бұрын
This video is 7 years old and still helping us noobs... Thanks!
@PerseidArchimedes6 күн бұрын
up is down🤣😂🤣
@that_jason_black6 күн бұрын
Try upscaling a whoop frame and mod it for 4 inch. Ref. HappyModel Mob 8 Frame
@failforcesquad6 күн бұрын
I would stick just with U profile arround the motor circle shape
@UmarAli-ye3cq6 күн бұрын
Hi, I want to buy a parachute for my drone "DJİ Mavic 3M, with RTK antenna." the RTK antenna will interfere with the parachute, what do you think...??
@RCwithAdam13 күн бұрын
I really don't know, but my guess is that it would interfere.
@shaniceball90526 күн бұрын
2024, I can't find the download option on Printables 😕
@RobertHilton-ho4kr7 күн бұрын
Adam. Nice video. How do I program each individual aux switch to do what I want? i.e. SWA - arm. SWB - change flight modes. SWC - (3 position) - xxx. SWD - RTL? The assign aux switches menu item seems un-intuitive. Thanks.
@RCwithAdam13 күн бұрын
If I understand your question, the switch will be selected in the menu for that specific function.
@mennosnoek73947 күн бұрын
Looks pretty good! I'm still rocking a Torvol Quad Pro and it seems like this isn't really an upgrade. but good nonetheless
@janhollemans13487 күн бұрын
Which firmware version you have?
@Pgr-pt5ep8 күн бұрын
Video waste of time.
@TransAmDrifter8 күн бұрын
i6s is even better. It has a touchscreen instead of menu buttons and center knobs are located on front corners and are spring loaded, so it's great for a tracked vehicle like excavator, bulldozer, crane etc. Yet... That touchscreen I mentioned before is impossible to get when damaged (hard to damage, but my kids achieved that).
@jeremy-jo4mn8 күн бұрын
What's the difference between an ESC with BEC and one without?
@RCwithAdam18 күн бұрын
Hey! If the ESC doesn't have a Battery-Eliminator-Circuit built into it, you'll need a separate battery pack to power the receiver and servos. Nowadays, it is rare to NOT use a ESC with BEC for airplanes. However, standalone ESCs are common for quadcopters because they don't need to power servos or the receiver from the ESC (that's powered from a pad on the flight controller).
@pocketgools31949 күн бұрын
Saw you at flite fest, and the mustache was awesome. I wanna get into bigger quads. I have the beta fpv Cetus pro, which is just the mini whoop, but I want to fly outdoors more. I also don’t want to break the bank. What are your suggestions, or a video I can watch?
@RCwithAdam19 күн бұрын
Hey thanks! Say hey next time and I'll give you a sticker! I don't have any specific models in mind, but I would say something in the 2.5-3.5" prop size range would be a good place to look. The smaller size usually means less weight, which means less likely to break, and the batteries will be smaller and cheaper than for a 5" size quad.
@pocketgools31948 күн бұрын
@@RCwithAdam1 I’m into airplanes so I have a few 3s 850 and 1300’s lying around. Thank you
@norcal_voodoo10 күн бұрын
Thank you for this awesome video. Super helpful 👌 👍
@userTJ3978010 күн бұрын
@4:18, that happened to me on Saturday afternoon; chasing the "chosen" plane, I got brutally smacked by another chaser and my Ugly Wonder went down hard!
@userTJ3978010 күн бұрын
Hi Adam, this was one of the only Flite Fests I had to miss in the last 5 years, but I was there as long as I could be this weekend (6/22-23, 2024). Thanks for posting!
@benjaminal-doory181710 күн бұрын
I'm the guy in the thumbnail for this vid. I know because I was the only guy in 2023 using an FM radio. And I have that shirt.
@EMDRONES11 күн бұрын
Does it fit in carry top shelf on planes ??
@RCwithAdam110 күн бұрын
I haven't tried it, but I expect it will since I could still (just barely) fit the larger pyrodrone backpack into the overhead on smaller commuter jets.
@MeBoazz11 күн бұрын
I want to get that bag so badly. The only bag I have is a 40L one from temu =(
@RCwithAdam110 күн бұрын
It's worth it! I would email rotor riot or keep checking to see when it's back in stocks. Or maybe they'll just come out with a version 3.
@lesconseiles987811 күн бұрын
Quiet fpv drone
@net69flix11 күн бұрын
how can i increase the volume of the timer?
@net69flix11 күн бұрын
awesome thanks, i will be setting that up on my tx
@amrv806411 күн бұрын
I have ffollowing problems 1. Transmitter doent show output mode 2, i accidentally soldered i bus input to sbus pad in FC will it ruin my fc 3. Channel mappin in Beta flight isnt working Please help me out
@serenestateofbeing106212 күн бұрын
The "low" one on the left in the thumbnail is as high as i can get mine 😂