Thanks to PCBWay for sponsoring this video. Check out www.pcbway.com/ for custom printed circuit boards, electronics, and rapid prototyping services (Use my referral link to get $5 of New User Free Credit) www.pcbway.com/setinvite.aspx... !
Get the .stl model file to 3D print your own here (use at your own risk, of course): www.rcwithadam.com/scorpion-t...
This model is a camera mount arm that is designed to position a small action camera behind an FPV drone and remain out of sight (or at least not be very noticeable) to give a third-person-view perspective during flight.
It uses an M5 nut and screw (compatible with GoPro hardware) to hold the camera in the GoPro-style mounting tabs.
Print laying flat, on the side opposite the hexagon-shaped cutout (where the nut is captured).
00:00 It's SO CLEAR!
2:45 1st flight
4:38 Why it's so wobbly
6:08 More flying
8:12 How to order from PCBWay
-------------
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: ko-fi.com/rcwithadam
OR
PATREON: / rcwithadam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam #fpvdrone #DJI