i'm constantly amazed by the quality and creativity of your work!

Nice job. as an OLD machinist/wood worker, it is actually called 4 "ott" steel wool.

Your out of tune Buddy

One of these is for sale near me, which is what brought me here

I've got a '23 Badlands manual. Over 15,000 Km and no problems or noise at all. Sorry yours is troublesome and Ford should step up and fix it.

Did you get the transmission issue rectified?

isnt that for vocal purpose rig.? i was waiting for you to use a microphone to hear voice from that thing why the guitar?

The reverb circuit only uses one side of a tube, so they took the other half and used it for a third gain stage. That means the non reverb models can play cleaner louder! Love these with my 6g15 in front, you get the best of both worlds.

I have heard Fender have had a higher rate of repairs on the 68 reissue amp models. Probably most of the one comeing in from China. Better to stick with the mexican made units. Its a shame since I really want to buy one of these, but don't want to be stuck with an expensive lemon!

They sound fine stock. For many people there is a need to tinker and change. These were not expensive and modifying them became popular. That is understandable and fine but they sound very good stock. They don't sound like an original champ, but they are good

I found the amps to be very dark other than the clean channel. Pathfinder 15R is much much better.

It’s 3 years later but ya that’s cool. Right on.

Not once did you say the MOD was a 10" speaker. But what I gather is you were able to install a 10" on the same baffle? Without cutting a wider hole and new screws? I doubt it.

how long does the battery last?

the super champ sounded best here, very transparent/smooth top-end...the other amps had these icepicky high-end which sounds like a cheap 70s SS amp

I have the green one and it is so great! I play acoustic eletric through it and it always surprises me how nice it is. I might get this one also.

SAme on my 2022 :-( Even after the TSB done

Great video thank you!

I wonder if you power the amp with a battery , it removes the noise,?

I have had one of these for over three years now. While initially I liked it, it went dead on me. New tubes did not fix it. I determined that it was likely the transformer. I could find no information on what or where to get a replacement. I called Fender and they said that they could not give me that information and that I would have to take it to a Fender service center who would then troubleshoot and order the part. I will still buy used Fender gear, but, I will no longer buy new Fender gear as this is my second issue in a row with a new purchase. The amp fried also just outside of warranty. My impression is that these amps cannot handle being turned up and played loud for extended periods. They sound great, but, in the future I will look elsewhere and go for quality components over brand name.

I designed mine with 3 10x2mm oval channels in the body and hammered in carbon fiber rods. Also used 30% gyroid infill and 7 layers for walls/top/bottom.

Bro doesn't know his guitar is out of tune

Dunno if you’ve made any progress but you might conserve on filament and print time by increasing the wall width along with top and bottom thickness. Maybe a bit of filleting on the edges. But it seems the two center pieces should be your primary concern.

What infill pattern did you use? The right infill at 30% with 8 layer walls should be as stiff as 100%. I use gyroid

The clean channel 1is excellent. For the price u get thr classic fender clean sound without huge money. Some of the higher gain models are quite good.

>that isn't told to anybody Literally told to everybody who's capable of reading the model's description they're downloading

Oh noooooo ..... the Princeton is the boss. It sounds the best of them all.

great review. i have the superchamp x2, regular edition. i saw a vibrochamp for sale locally for $600. Wondering if i should pick it up and sell the superchamp or stick with the superchamp.

Hi! I buy this amp about 10 years ago for 160€. Now they sell it on ebay in Germany for about 450€😊 Good wishes from Germany/Düsseldorf

That really sucks. My Father worked as a Supplier Quality Manager at Ford factories in Ohio for 30 years. I remember him advising me to NEVER buy the 1st generation of ANY new vehicle....be it a Ford, Toyota, Porsche, etc. because all new models have gremlins, quirks etc that need to be finessed and optimized. In fact that holds true for any new consumer product....not just cars. That was sound advice. As much as I covet a Bronco, I will patiently wait for the 2nd generation. It typically doesn't pay to be an early adopter of anything.

Good to know ! Got mine today ,brand new and high priced as hell . Anyway , I love this damn thing ..

Couldn't you even bother to tune up before recording a video? 🤷‍♂

The best way to make the body more rigid is use a rigid filament like PLA or something with infused with carbon fibre, using more perimeters (about 7) in your slicer and use lighter gauge string as you did. Hope this helps if you’re still having issues with the body flexing.

I fixed the body flex by making an aluminium plate, much like a a Strat cover plate and bonding it to the back with epoxy. There are also designs that have a hole through the body to insert a 10mm rod to stop the flex. They work well too.

Subscribed ❤️ 👍

FYI, Checker Cabs were built in Kalamazoo, too.

For $549.00, or twice as much, it is effing amazing and the pickups are unbeatable. I would disagree that it is all that long. Perfect for what it is. Do Zzounds.

Is a low noise hum common in the Fender Vibro Champ xd? Even when nothings plugged in.

I just plugged in my new olive drab green Firebird in today for the first time...

Just picked one up today for recording…I love it!

Beautiful Bronco. I too do NOT need the bells and whistles.

Dude, hit the gym - your life depends on it 😮

Bidenomics just raised the price another hundred to $899. Better get one now before they go over $1k - thanks Joe 😮

Got mine yesterday. Wish I had bought it when it first came out - would have saved thousands by not buying other amps .

u got a wicked church in front of you

I made a telecaster that solved this with a steel bar down the center . Adds weight. Plays good. Working on a bass guitar with 2 steel bars that looks awesome. Haven't got the neck for that yet though

Now do a video on tuners.

How many hours are you getting out of the battery with the Spark? I'm just wondering if it's worth it to spend like $30 more on the 7102.

Where did you get the wireless setup? Why did you get the one you did?

Hi I'm Firebird Player and I love this EPI Great Video Thks from Germany