@@Onyxaxe Hi Onyxaxe, i painted the xtruder, the frontplate and the fan, the rest are 3D printed covers you can glue on the printer. I have them available on my patreon page for download, but will make them available for free as soon as i make a video about it (probabely in 1 to 2 month). Wish you a nice day and thanks for you kind comment 👍

@@stevenbusk539 Hi Steven, for the chains, i go with the cheapest SRAM or Shimanos, whatever is cheapest at the moment. I do this since 10 years and never had a problem. "Quality E-Bike chains" are not worth it imo, they do the same as the cheap ones. You better go with a quality brand and take the cheapest model. But yes, there are a bunch of more expensive models you could use, they will work as long as they are compatible with your shifter and gears (10s,9s, or whatever your numbera of gears are).

@@xiphoid2419 hi xiphoid, i printed them in PLA from polyterra. Mine came out a bit stiff too, but i had no problem open them enough to get the leveling gear in.

@@vooodkathetruthseeker6747 yes, its part 5 of this series, so there are 4 other videos ✌️

Thanks Thomas Yes the Voice is new, i used a "AI voice" in the past (Text to speak), this time i tried to speak it with my voice but was not satisvied with the result, so i found a voice filter, that just made my english sound a bit better clearer. I myself am not sure whats better or worse. So you liked the AI voice (from the previous videos) was better? Im happy to get this kind of feedback, thanks for that

You mean the stabilizers? Im not sure if they also fit the N3 max, but you can trie.

True, only the stok settings...

@@Dirt-E-Bikes u should to, it'll make outer walls a way smoother.

Thank you very much for your kind comment. Really appreciate that. Wish you a nice day 😃✌️

You are welcome, thanks for your comment 🙂

I had only minor issues, and they are gone now. I wish you luck on yours 👍

It will 😅

To bad to hear that 🙂‍↕️ In my case, i had only minor issues with the bed going ou of level. Since i installed them, i had to re level only once... Yes sure, if you find something that works better, please let me know. Allways appreciate that 👍I wish you a nice day ✌️

Your solution is OpenNept4une custom firmware. Fixes all the software issues of the stock one.

@@kenyajobs1069 will take a look on that, thx

Thanks a lot Bill, it took me a while... I hope i can do part 6 somewhat faster ;-)

If you want, i can send you the 3D files from patreon for free, so you can try them. I tried to unlock you on the patreon page, but it seems that this option will only be available in the near future... Maybe i can try to send it to your KZfaq-Email (@billmacfarlane...) ? But im not sure if that will work. Maybe you have a better idea how i can share the files with you? Have a good day printing ✌️

Happy to help anyway I can...let me join the Patreon and then you might be able to

@@billmacfarlane8864 Thanks mate

@@billmacfarlane8864 But i am not sure how and if that works on patreon (yet). I tried to send it to your youtube email but that does not work unfortunately. 🙂‍↕️

Thanks a lot Sofie 🙂

Great to hear, and thanks for your comment 👍 Im curently editing part 5 of the series ;-) Keep on printing and have a nice day ✌️

Thanks mate, you are very welcome, im currently editing part 5 of the series ;-) Have a nice day ✌️

Thanks mate

Hey Tiago, true, i tried something new on the next upgrade/modification video i release next week. Pleas let me know if its any better. ✌️

Thanks mate, this video is part 1 of 4 of the neptune upgrades/modigications. And im currently editing part 5 ;-) Happy printing ✌️

You are very welcome, by the way, its a whole series i do on the upgrades/modifications with 4 parts for now, and currently i am editing part 5 ;-) Have a nice day printing ✌️

I found better upgrade when it come to the stabilizers

@@clark1012 cool, can you share it?

I think i have seen a similar modification for ender printers as well, maybe you can find one for your printer on thingiverse ✌️

@@Dirt-E-Bikes Yes, I already installed one. Thanks!

@@RetroDaddyPH nice 👍

Thanks Sofie :-)

Danke 🙂👍

They are available on my patreon ✌️

Finally one that gets it 😁

Thx mate :-)

Very cool 👍 how big is the area you plan to multiboard? Yes even with 7x7 tiles it took me quite a long time to build my (smal) multiboard ;-) But it was worth it, and a whole wall will be that much cooler then only a smal board! Let me know how it went, and i wish you a good time building it ✌️

@@Dirt-E-Bikes superbig area we are talking about two whole walls, but im starting to think to buy ikea pegboards and just print stuff to hang and use my printed multiboard on smaller surfaces.

@@Glorious_Yell0wYes i guess that would take a long time printing... Did you see that there is a option for stakable printing?... That way you could let your printer print multible tiles at once... But still, you would need a lot of time for your area. I guess the ikea boards with prints is a good option too, especially for larger walls.

@@Dirt-E-Bikes No i havent seen that, wow that would really help. Im thinking about uppgrading to a new printer. Im using a flashforge adventurer 3 now. But thinking of going bambulabs or what ever they are named. =)

@@Glorious_Yell0w yes a bambulab carbon or something similar... That would be great, but it also have its price 😅

Thx kolver, Yes, that was close 😅 Im not sure why the 6+2 pin connector fited in the 4+4 plug... That should normaly not be possible, right?

@@Dirt-E-Bikes Well i have no clue why those cables fit there but I have seen some people on Reddit who did the same mistake and just didn't notice that those GPU cables aren't fit for CPU cables and they either ruin their motherboard, CPU or GPU. Also you shouldn't use old modular PSU cables in a new PSU cables. That result in the same failure. PSU and motherboard manufacturers should really come up with a different connector it's too easy to mix up

@@kolver624 true, and thanks for the infos. i asked myself what the difference is between this two connectors, the only thing i heard was that "you cant do it wrong, because it only fits in where it belongs"... That does not seem to be true, at least not in my case ;-)

You are welcome, i did 3 more parts of upgrade videos for this printer and part 5 will be available soon ;-) Have a nice day ✌️

Thx mate, you made my day 😃👍

Thx MrGeuggis ;-)

Hey Brad, sorry im not sure what that one was, i did not use it for long, cant recommend it. The scraper that came with the printer doesnt look that nice, but does the job 10x better 😅

good to hear, i wish you a good time printing

yes, true... i had to take some english spelling lessons first, now i tried in my newest video, please let me know if its any better

Most parts will fit i guess, need more links at the chains

Thats for sure 😅

Thanks, i cant tell you if there is a difference between and if so, what would be better. For me, i only wanted to charge the batterys of my drone, as well as our phones, so for that its oke. But if i plug in all my drone batterys, the converters get really hot, it seems like i run close to there max current. If you plan to use higher current from your battery, you may choose other converters (or more of them ;-) ) Oh, and if you find out about buck converters, please let me know ✌️

​For my project I am looking for a usb hub with multiple ports that can also fast charge. But I am having a hard time finding a DC input usb hub that answer all of my needs. Do you think it is possible to connect multiple DC DC convertors in parallel with usb a connecting at the end or would it create problems? ​@@Dirt-E-Bikes

@@yehudamakdosi8451 i mean, if your battery can deliver x amount of current, and you stay within its limits, that should work. But im clearly not a professional this is just what i guess, so please checkt that in some kind of dc forum to be sure. I did 2 dc chargers in paralel, and that works. This battery i use can deliver 30amps continous and i guess i pull up to 10amps by loading all my fpv batterys per USB-A... As i said, the dc converters are getting hot, but not the E-Bike battery. I found my converters on Ali express but you can find alsp different types on Ebay and other platforms. Please let me know if you find something good, maybe i will add one or two converters to my own setup :-)

Thanks mate 🙂👍 I did 4 of these videos, so if you want you can also check them out... And im curently editing part 5 ;-) Have a nice day ✌️

Yeah, im searching for a better one. The problem is that in my native siwss accent, you would not understand anything 😅

@@Dirt-E-Bikes Stephan from CNC Kitchens accent isn't so bad. It's kinda thick.

@@harrisappleton5866 thanks, but he is german, im swiss, thats a whole other league ;-) for a swiss guy, stephans accent sounds like cambridge english... I am about to take classes for a better pronunciation and will try it in a future video. I know the ai voice is not perfect, but this way you can at least understan what i try to say

Nope, all the same settings on the new maschine and no problemos anymore ;-)

Hey isthattrue, i also tought so at the beginning, but the seller confirmed that something was bend and sent me a new one. No problema with the new one so far. Mesh also was quite good with the old one, that was not the problem ✌️

You are very welcome 🙂

Hi aidendroge, i would recommend to get it with a battery, but only if the battery is of good quality

Hi Kimmytuna, yes that would be the better idea. I have am using now a other storage solution that i will show in the next video. ✌️