Thank you, was struggling to decide if I should replace my dryer belt or not. gotta replace mine.

Best instructional video for recalibration. Thanks.

I’ve listened to so many videos but this guy is the easiest to follow/understand. I’m 70 years old and I did it! Thanks!!!!

Great video. Perfect step by step instructions with great camera work. Thanks for saving me money or at the very least a whole lot of time. I appreciate it! My local Lowe's had the part so I fixed it on a Sunday!

Great commentary and knowledge

I was beginning to think my mechanical skills have evaporated but with your tip concerning the idler and the notch it suddenly became easy. Thank you very much.

Thanks directions excellent.

Love ya thanks so much great info!!!

This has been the best video to follow but I still don’t know what I’m doing 🤦🏻‍♀️my lid lock keeps flashing and unlocking as well as not spinning 😢😕plz help 🤷🏻‍♀️

Thank You. You just made my next few day's so much easier.

After diagnostic was finished it went back to 0:00 just as you said. If this happens does this mean nothing going on with the machine? I am having a problem with the washer. When the clothes are finished some of them have a stain like marks on them that appears to be lint. Is there a way to clean a lint trap?

En español.por favor

Hi, My kenmore 600s won’t start?

What does cook and hold do? Do these have time bake? I have the electric version but with the exact same control panel

Your the only one that knows this ? Very good info saving me having to get another washer … again .

Stay away from new washers

Thanks so much for this video! Saved my bacon and I was able to change out my control board with ease :D

So I watched the whole thing but don’t know exactly how going into diagnostics mode helped. Note I bought mine 2nd hand and got no manual so maybe it was what told me why diagnostic mode was helpful. I never saw any diagnosis in the video. Thank you Appliance Flipper!

My washer runs regular wash cycles for hours longer than its supposed to. Will this fix it?

My load failure got when clothes were in it, will it calibrate with those clothes still in?? Fix this for me, I'll show some love.

Can take it all huh..? Anybody ever tell you that your a real life version of cleveland? Kinda.. lol. Sorry.. keep doing you dude.. wish i could figure out how to get into the business of appliance repair and reselling.. cant get any client base. But thats my dream i guess., that or an independent contractor remodeling bathrooms and kitchens myself.. cant build any client base.. i only got 4 or 5 people who have asked for big jobs and never get any calls back from them cus nothing ever breaks.. and guess their friends and family dont ever need anything done or they just dont tell em.. all of em were happy because i charged half of what any other company would have and kept all the detail in it.. dunno.. guess im just not lucky enough to get what i want.. never have.. good to see others doing it though..

Thanks was very helpful

Your video was very helpful. I do appreciate it. However did not fix my problem. Mine just makes clicking noises

EVEN THIS DIDN’T WORK FOR ME! 😭

Nicely explained. Hidden clips in the front!

I did all these steps, and my washer keeps coming back to lock and not unlocking.

I tried these steps but once I got to rinse and pressed start button, all lights immediately turned off, no loading . Also machine continues to stop during cycle with "Wash" Light On. Just Replaced Control Board Which was Maytags for sure Fix To The Issue...any suggestions?

Thank you.

Thanks so much. Yours is the only video to show how to get the belt on right🎉

What does LF mean

You have demonstrated the way to make a “how to” video. Straight to the point. Clear instructions. Perfect camera angles. Easy to hear/understand audio. Great job, thank you!!

How do I get it out of diagnostic mode?

Mine stuck in all the lights blinking

THank you perfect fix to get to the recalabration mode made my day

Thanks finally

I have a 35 year old Kenmore that I recently changed the belt on for the first time. If it helps anyone instead of clips on the bottom of the front panel there were 5/16" screws just like on the top of the front panel but they are on the outside of the cabinet. You do not need, or want to remove those screws, just loosen them so that you can pull the panel upwards after removing the top screws. Also, for the life of me I don't know why but there are two different belts for these dryers, one is for a 27" wide model and one is for a 29" wide model. The belt for the 27 inch has the exact same dimensions as the 29 inch belt and also the same number of ribs but it costs quite a bit more. I've asked around why this is but no one seems to know the answer, not even a manufacturer I asked that sells replacement belts. Same exact belt dimensions, different part number, different price.

Hello I have the same washer as Kenmore 600 it will not fill up with water how do we no if the water pump I bought it at a yard sale wasted my money but can you help me please 🥺

Thank you sooo much!!! I have successfully repaired it all by myself!! 💙💙💙💙

Lights are not flashing in the second recab

What if I don’t hear anything after the first step?

Yes, ours just doesn’t heat so that’s what we were looking for

thank you. this so far has made my washer dryer combo start working again. even though my particular unit has the normal position to the 8 oclock side of dial i followed your instructions like it was at top/12 olcock. i did the turns of dial and was able to get it to reset and calibrate. i had replaced the lid lock a while back and was worried the lid lock had failed again. this unit is VERY VERY hard to replace the lid lock. an experienced appliance repairman had a very difficult time replacing this one. model wetlv27hw1. i will not buy another whirlpool product like this. i will also try and ask repair man if he can approve of new purchase model and ease of repair. nothing made like a 1970s unit. no computers needed. i want a non computer non water saving dial switch machine. thanks for your video.

Just want to say thank you and God bless you I have used your videos to fix my washer so many times you have saved me so much money God bless you and I'm sure I'll be back but I will share your video all the time

Thank you!

Thanks!

Thank you so much for timestamp 4:51 !!!!!!! Your video is now a direct hit to resolve my issue thanks so much

How did you determine that was the issue? Or can you test it to see if it's faulty

When I do the calibration instead of the lights going off they stay on

Just changed the idler pulley and belt. Drying clothes within 15 mins. Thank you sir very helpful video

Great advice - was able to reset after power surge