Ruststored Hot Rods

Пікірлер

@occoug 14 күн бұрын

It’s still amazing to me how good 3000 grit can make paint look. It is looking good.

@Ruststored 13 күн бұрын

Can't agree with you more, Thanks

@VinoRatRodbuilds 14 күн бұрын

Paint is looking good.👍

@Ruststored 13 күн бұрын

Thanks 👍

@rustedjunkgarage3316 14 күн бұрын

The Panel paint is looking good Bill, the vacuum wiper delay on those old cars was an option I believe. 💯🆒👍

@Ruststored 13 күн бұрын

I think an unavoidable option

@rustedjunkgarage3316 21 күн бұрын

Getting it done, gotta take care of the Daily Driver. Congratulations on 50 year Anniversary. Your Old. 🤣🤣

@Ruststored 19 күн бұрын

Old broken but still causing trouble. Thanks

@rustedjunkgarage3316 19 күн бұрын

I am right there too, had both my eyes done a year and half go, after the surgery I was a num skull and it never wore off. 🫵🏼💯🆒

@waynethomas899 22 күн бұрын

Hi bill congratulations on the milestone you don't look a day over forty speaking of cleaning shops when you are Finished with yours can you swing by mine I would appreciate it regards wayne

@betweenthesharksgarage 22 күн бұрын

dude... getting into the door panels is always a pain... good on ya for knocking it out

@Ruststored 19 күн бұрын

Thanks I can only ignore things so long.

@randymacsgarage 22 күн бұрын

Yeah I know what you mean about cleaning up the shop it's a never ending task around here for sure and the maintenance I don't know if you watch any of my videos or not but I try to do my own stuff too but just the other day because of the heat here mostly the wife car needed an oil change and I decided to take to someone new to me and I always try to support the smaller shops when I can two and a half hours later I was on my way yeah 2019 Mazda oil change 100 bucks lighter and as I got out of the car in the garage I noticed a round tire sized dent in her rear door you know the circle pattern of a big tire "this place was also a tire shop" but since I don't drive her car my 2nd time only since new I wasn't sure if it had always been there or not guess what nope it was new what did the shop say when I called them ? We will review the cameras and get back to you

@Ruststored 19 күн бұрын

Your shop is way cleaner than mine! Good luck with the camera review.

@VinoRatRodbuilds 22 күн бұрын

Congratulations Bill on your anniversary! 👍

@Ruststored 22 күн бұрын

Thanks buddy its a big one.

@colinwest5294 Ай бұрын

Try 2000 then 3000 grit to get it flat, then polish. But if the line persists it could be dark pigment staining - the heavy blues particularly drop to the bottom so when you flat it all back it leaves a wash mark as a darker stripe as you seem to have. Have you got a spot gun? They are really cheap any way lay a little fresh over the area leave it for a few weeks to harden, then flat it lightly with 2000 and 3000 and it will dissapear. Don’t stop painting mate, even the best get runs and they have to do the same, it’s why it costs so much! You have to fix it - it you are anything like me you will look at it each time you walk past and it will do you nut in! Nice wagon though I really like it1

@Ruststored Ай бұрын

Thanks so much for the tips. I did pick up a sharp spot gun. I was going to use it for some small spots. Ill give it a try.👍

@colinwest5294 Ай бұрын

Good luck - not that you will need it you have the attitude to sort it!

@user-zh8li5vo2u Ай бұрын

Beautiful Dog what kind is she please

@Ruststored Ай бұрын

Hazel is a chocolate Lab

@HERMIE7323 Ай бұрын

It’s scary

@Stinkencute Ай бұрын

Hazel

@rustedjunkgarage3316 Ай бұрын

It’s just about perfect Bill, drive it and enjoy the truck. 🫵🏼💯🆒

@Ruststored Ай бұрын

Thank you Steve

@GeeenJ Ай бұрын

looks gone from 6 feet away lol if you use a block it will help blend the area try using 2000 to finish it

@Ruststored Ай бұрын

Thanks I ordered some 1500 & 3000 pads for the DA

@randymacsgarage Ай бұрын

Well I will take the rain over our 108 deg today here in LV lol , will say you have the appropriate shirt on for dealing with boo boo's lol , I had an instructor at Ft. Bliss I was taking an automotive body class in the evenings there and he told me those aren't runs , they a viscosity meters lol. hey one bite at time right? Next thing you know one day your gonna look around and say shoot I don't have nothin to fix .............🤣

@luke8210 Ай бұрын

Same here in Southern Arizona. 108 today.

@Ruststored Ай бұрын

At 108 Id be hiding under a rock. At the rate I screw things up I see myself being busy for some time.

@rustedjunkgarage3316 Ай бұрын

I lived in LV for 20 years, when it got real hot I had a big hole in my back yard full of water, the heat never bothered me!

@luke8210 Ай бұрын

@Ruststored I'm good to about 110. After that my body slows down. I own a pool service company. So, I get the opposite, not so fun part about pools.

@VinoRatRodbuilds Ай бұрын

Well Bill I can't be a critic. I've never painted a car. Yep lot of hand ringing over at my house wondering what I'm going to do when I get to that point. 🫣

@Ruststored Ай бұрын

Id try to find a friend with a paint booth. Although you clearly have enough penitence to do it yourself

@rustedjunkgarage3316 Ай бұрын

Bill it’s the same here until tomorrow, Junuary in the PNW. 😩

@Ruststored Ай бұрын

January shouldn't be 5 months long. Gave up on the garden this year.

@VinoRatRodbuilds Ай бұрын

Yep Bill I saw that it was raining in your part of the woods but it looks like you're going to have a pretty nice weekend.

@Ruststored Ай бұрын

Thanks Robert. I hope so. My grandson.s high school graduation party is this week end.

@HERMIE7323 Ай бұрын

All great stuff. Can’t get rid of any of it!😂

@rustedjunkgarage3316 Ай бұрын

Yes you do, gotta be something that I need hiding in that pile of treasures. 💯🆒

@Ruststored Ай бұрын

LOL yes there is at least one hot rod hidden in the mess

@rustedjunkgarage3316 Ай бұрын

The 37 is cool old truck for sure, I’m not sure about drilling the carburetor butterflies to adjust AFR. Seems like the margin for error would be pretty big, maybe contact the carb manufacturer tech support and ask them what the recommended way to do that is, just some thoughts. 🫵🏼💯🆒

@Ruststored Ай бұрын

Thanks for that Steve. I'm doing research now

@waynethomas899 Ай бұрын

Hi Bill good to see the old 37 getting some love you should be proud of your self she is a real looker anyway good way two start the day watching someone else laying on the workshop floor In stead of me regards wayne

@Ruststored Ай бұрын

Thanks Wayne.

@VinoRatRodbuilds Ай бұрын

Yeah Bill nice work on the 37. 👍

@Ruststored Ай бұрын

Thanks Robert. I didn't really drive it much last year. Now I'm seeing lots to do.

@VinoRatRodbuilds Ай бұрын

that passes by the inspector ! 👍

@Ruststored Ай бұрын

Thank you sir

@rustedjunkgarage3316 Ай бұрын

I like building on a budget, us old Retired Guy’s have to know how to do that. Perfect fix. 💯🆒

@Ruststored Ай бұрын

Yup Plus we have the time to spend LOL

@MarksGarageChannel Ай бұрын

Excellent, I was wondering how you were going to make the square holes - I'm glad you showed it.

@Ruststored Ай бұрын

Thanks for watching

@bobcapps3719 Ай бұрын

what kit is this?

@Ruststored Ай бұрын

wish I could remember.

@bobcapps3719 Ай бұрын

@@Ruststored me too. lol

@rustedjunkgarage3316 Ай бұрын

Looks darn good, way to shiny for that truck, are you going to the Monroe Swap Meet?

@Ruststored Ай бұрын

Can't make Monroe this year. The clear is satin. didn't want to go flat. Im going to clear the truck.

@occoug Ай бұрын

Looks awesome!

@Ruststored Ай бұрын

Thanks buddy

@VinoRatRodbuilds Ай бұрын

I like it! Nice job Bill. 👍

@Ruststored Ай бұрын

Glad you like it

@randymacsgarage Ай бұрын

Gonna have yourself a goin to town rig there before ya know it young feller.

@Ruststored Ай бұрын

Im hoping so

@MarksGarageChannel Ай бұрын

That looks fantastic! I love the counter-sink screw solution for the support bracket.👍👍👍👍

@Ruststored Ай бұрын

Thanks so much Mark

@rustedjunkgarage3316 2 ай бұрын

That’s doing it on a budget, gotta like that. 🫵🏼💯🆒

@Ruststored 2 ай бұрын

It helps to have all the power tools.

@MarksGarageChannel 2 ай бұрын

It's gonna look great when you put it all together.

@Ruststored 2 ай бұрын

Thanks I hope it fits

@offroadjunkie303 2 ай бұрын

Love the channel. I enjoy your projects. Thanks for sharing

@Ruststored 2 ай бұрын

Thanks so much!

@Stinkencute 2 ай бұрын

Cameo by Betty!

@Ruststored Ай бұрын

you noticed LOL

@waynethomas899 2 ай бұрын

You have a great deal more patience than me that little Bush would have been across the workshop on the floor it's looking good bill regards wayne

@VinoRatRodbuilds 2 ай бұрын

Yeah I looked up ospho looks like it's a great product. 👍

@Ruststored Ай бұрын

Rust never really goes away. But this really slowed it down. I hope.

@rustedjunkgarage3316 2 ай бұрын

Looking good Bill, the extra room in the shop will be nice,,💯🆒

@Ruststored 2 ай бұрын

Thanks, It should help.

@MarksGarageChannel 2 ай бұрын

It's getting there. I'm looking forward to the installation of the wood bed.

@Ruststored 2 ай бұрын

Thanks mark. Im getting close.

@randymacsgarage 2 ай бұрын

Its always the ground wire , I thought accessory wire meant you needed to turn the key to acc. in order to have power 🤣

@Ruststored 2 ай бұрын

Yup turned out the pressure switch is sticking

@VinoRatRodbuilds 2 ай бұрын

Darn car wars anyway! 🫣

@Ruststored 2 ай бұрын

Well when you have to many toys something is always Brocken🤣🤣

@tomference4618 2 ай бұрын

...you have me nervous about being able to connect the transmission arms after motor is installed. Is it possible to put them on before motor is mounted in place, seeing as the connection is not facing you? Thanks for what you did show to all interested.

@Ruststored 2 ай бұрын

I think it would be a lot harder with the arms on first.

@rustedjunkgarage3316 2 ай бұрын

Good job Bill, I was feeling the pain watching you on the garage floor, glad I don’t have to do that garage floor crawl to often any more. 🫵🏼💯🆒

@Exoken-tg9ee 2 ай бұрын

And what size is the black square tubing going into your yellow square tubing?

@Ruststored 2 ай бұрын

The black tube was always part the cherry picker. U boles I got from Ace Hardware. Don't recall the size.

@betweenthesharksgarage 2 ай бұрын

man thats a great car... my 54 does the same speedo bouncing but not the noise...

@Ruststored 2 ай бұрын

Worst case you will need to replace the entire cable.

@GeeenJ 2 ай бұрын

i use light machine oil on the inner speedo cable works well

@Ruststored 2 ай бұрын

Perhaps I should have used something lighter.

@randymacsgarage 2 ай бұрын

@@Ruststored I hate to reply twice but I always used Graphite just sayin bye

@randymacsgarage 2 ай бұрын

We had a 52 when I heard that speedometer sound it brought back old memories of that car three on the tree straight six we painted with house paint and brushes man she was a looker 🤣🤣

@Ruststored 2 ай бұрын

Sounds like a beaut.

@MarksGarageChannel 2 ай бұрын

Success!👍👍👍👍

@Ruststored 2 ай бұрын

👍

@VinoRatRodbuilds 2 ай бұрын

Great day in the garage Bill! 👍

@Ruststored 2 ай бұрын

Thanks buddy

Ең жақсы KZfaq

Пікірлер