Excellent instruction how to assemble the Legend equipment. I am looking for a cartridge system and a comparison between stock, Legend, Progressive suspension, Öhlins etc. It would be good to see someting like that. In this case comparison between stock and Legend.
@dylanhanson2678Күн бұрын
The Boyyyyys 🔥💪
@ODBRacingКүн бұрын
Another great episode!! See you boys at Willow!!
@Ridingon3TN3 күн бұрын
yes it does why i replaced the plastic one with a screamin eagle one so that it's partially covered under the extended warranty should it become a issue given all the other issues i keep having with the m8.
@lancem44733 күн бұрын
And THAT is why I do not own an HD. I cannot justify spending $20000-$30000+ for a motorcycle that I’ll have to spend $Thousands on, AFTER I BUY IT, to make it reliable and robust. My 2006 Kawasaki is bone stock (I’ve only done routine oil and tire changes) and it is very reliable. I like bikes that run instead of spending all their time in the shop.
@TuckerSpeed4772 күн бұрын
I'll never understand why so many anti-Harley guys spend so much time watching videos about Harleys.
@lancem4473Күн бұрын
@@TuckerSpeed477 I’m not “anti-Harley” but I am “Pro-Reliability” and “Pro-Best Bang for my buck”. If a little bit of dissent or questioning of HD is all it takes to “trigger” HD fan-boys, then my criticisms must not be too far off from the truth.
@TuckerSpeed477Күн бұрын
@@lancem4473 I'm not triggered at all. Doesn't really bother me, I just always think it's weird how much time people spend trying to tell us why Harley's suck. I like Harleys and am not really into metric bikes, so I spend zero time watching videos about Kawasaki's and trying to convince people why they aren't as good or why I don't like them. I just ride what I like and don't really worry about what everyone else is doing.
@TuckerSpeed477Күн бұрын
@@lancem4473 Also, your comparison doesn't really make sense. You said your bike is bone stock and you've only done oil changes and tires. Harley's are also pretty reliable if you leave them bone stock. But we are a speed shop and specialize in high hp motor builds and tuning. In the beginning of the video we mentioned that these are the weak links once you start increasing the hp. Any bike is going to have some kind of weak link once you start increasing power, so a bone stock Kawasaki is not really what we are talking about.
@greenmarine53 күн бұрын
I've owned Harley's all my life, I have a love hate relationship with them. On one hand no other bike in the world is like a Harley, then on the other hand why should I pay for a bike that needs expensive upgrades off the showroom floor. I've also owned many Jap bikes and yes some needed upgrades, but rarely for safe higher speed riding
@blkcoupequattro4 күн бұрын
Fastest I've ever been is about 170 on my Ducati in MEXICO.....
@crackerjack426854 күн бұрын
Good to shop with and support good people
@TuckerSpeed4774 күн бұрын
👊🏻
@northmanstrength89684 күн бұрын
Awesome bike, ive gotta build a Road King now after seeing this! Love from Sweden!
@bigbiscuit13145 күн бұрын
Hell yes! Please build a landspeed bike.
@Levixwelch5 күн бұрын
I'm glad I watched this video! was fun to watch, I'm happy you didn't spend this whole video talking about his bike cause if I want to learn more about the bike I'll go follow chico instead of crying about it on youtube!
@TuckerSpeed4775 күн бұрын
@@Levixwelch 😂
@wojin5 күн бұрын
Waste of time video, wish I wouldn’t have watched. Not a damn thing to see, no info about the bike
@Rollanotheronemyfriend4 күн бұрын
My sentiments exactly.
@steveo77675 күн бұрын
Who is the 🇦🇱????
@Chancho666 күн бұрын
teflon?
@timblackburne777 күн бұрын
You never did explain why the plastic manifold is junk. Mechanically speaking, plastic does not retain heat very well, meaning the intake air temp readings should be closer to accurate than if a metal manifold was being used. Ultimately, with a metal manifold, at low rpms and idle the engine should be in a state of detune due to higher intake air temps, ie fuel enrichment and spark retard. Maybe it makes no difference on such a short manifold, but has any testing been done?
@timblackburne777 күн бұрын
To back this up, I relocated an intake air temp sensor on a Jeep 6 cylinder from the aluminium intake manifold to the plastic intake pipe and it consistantly had better fuel economy and ran smoother.
@TuckerSpeed4777 күн бұрын
@@timblackburne77 we’ve had issues with them warping and causing pretty bad intake seal leaks.
@timblackburne776 күн бұрын
Im in Brisbane Australia, its fairly warm here. 3 friends and I all ride softails with 30,000kms on them, ours are still good. I am interested to see how long they last here
@GEARZM8 күн бұрын
Also i dont have a runout gauge my 2017 roadglide ultra has 20k miles you think ill have an issue with a chain drive sns cam kit ? I already ordered it but some say runout with chain isnt a big deal
@TuckerSpeed4778 күн бұрын
A chain drive cam is definitely the better option if you don't know the runout. It's always good to check, but you will most likely be fine.
@illfaptothis3339 күн бұрын
Had to do this twice over. When you said "now this part is crucial" you really meant it lol. For anyone else watching, SERIOUSLY make sure you do not torque the intake manifold down first... It will make your bike sound horrible Also, I was skeptical about this upgrade. I don't think plastic is inherently bad. But my tuner said I might have an intake leak so I went ahead and replaced mine. After installing it correctly, my idle came down quicker after starting up. Usually it would be around 1300 to 1400 for a long while on a cold start. So I guess several people were right, my Dyno tuner, and everyone that craps on the plastic manifolds.
@RMD992-f2n9 күн бұрын
that buckle is so thin metal. seems like anyone can easily cut it off with basic tool....
@TuckerSpeed4779 күн бұрын
That's not the point. Anyone can steal pretty much anything with enough effort. You can never prevent it 100%, but most thieves are opportunists and this prevents quick snatch and grabs which is how most helmets end up stolen. Sure, someone could cut the strap or the buckle and make the helmet useless but that would defeat the purpose.
@hammeralpha522413 күн бұрын
Where is your shop ?
@TuckerSpeed47713 күн бұрын
We are located in Ogden, Utah.
@GetItGary15 күн бұрын
That’s my Boy, very knowledgeable dude with an eye for it 😎💪 can’t wait to see more paint jobs from Matt rolling around 🙌
@nate_gracey15 күн бұрын
Hell yea matty. ❤❤❤
@ramoncito845415 күн бұрын
LFG Matt Z!!!
@timferguson900516 күн бұрын
just installed mine took way more than a few hours but was farily easy the wiring harness was not in the way didn't take back wheel off my dyna is a2000 with a 124 thanks for the great video
@Levixwelch18 күн бұрын
Lets go! Awesome to see how stoked those kids were! Let's blow this years donation out of the water next year!
@RidersShipmate19 күн бұрын
"We know nothing" that's makes it even sweeter brother. I grew up in Bedford-Stuyvesant, Brooklyn. I had to complete with men to get time on the courts at the park. Free lunch in summer and during school year. *Community pools were closed from the fall-out of school bussing protest against race integration. Government block cheese lines, powdered milk, Kool-aid packets, WICK, and Welfare checks to purchase groceries. My summer time job started with The Restoration Project that hired teens to clean out abandoned lots in Bed-Stuy. I would be in jail like many people I knew. SKWID Rider's Shipmate ET1(SS/SW/MTS) US Navy, Ret. Associate degree, Bristol CC Bachelors degree, University of Texas at San Antonio Ronald McNair Scholar of the year 2020
@rickkoscielniak787321 күн бұрын
You didn't adjust the new clutches. curious why not
@TuckerSpeed47721 күн бұрын
@@rickkoscielniak7873 hydraulic clutch. No adjustment necessary.
@andrewlima735622 күн бұрын
Schweet, thanks bro!
@TuckerSpeed47722 күн бұрын
@@andrewlima7356 no problem!
@FernandoChaves23 күн бұрын
09 and newer? They have these for the 08 too. I have an 07 CVO Electra with the Harley 08 cush drive upgrade kit. And I have the Alloy Art dampeners in it.
@dr.marcusdahmen27 күн бұрын
Does it work with a 2023 CVO Street Glide too?
@TuckerSpeed47727 күн бұрын
I'm not sure if it works with the new CVO models yet. We haven't had a chance to test fit one.
@TuckerSpeed47727 күн бұрын
If you call Alloy Art they should be able to tell you for sure.
@larryc27629 күн бұрын
great Video
@TuckerSpeed47728 күн бұрын
Thanks!
@Ghost-zo2zm29 күн бұрын
Hi Tony. This is a nice machine man. I was wondering what brand are the lower fork legs ?? Looks killer
@TuckerSpeed47729 күн бұрын
@@Ghost-zo2zm thanks! They are from Alloy Art.
@Ghost-zo2zm29 күн бұрын
@@TuckerSpeed477 so this fit perfectly with the top stock tube ?? I’ve got the Ohlins inserts
@TuckerSpeed47729 күн бұрын
@@Ghost-zo2zm yeah they do. We have them for sale on our website.
@ericv79flhАй бұрын
Good walk through, Thanks for that.
@darkhorse2reignАй бұрын
That paint is sick
@corymcarter6405Ай бұрын
Changed my stock kush drive,noticed difference right away,cheap up grade..
@craw405Ай бұрын
Concise, great vid. Doing my first 3 hole oil change on my m8 tomorrow.
@victoryengineerАй бұрын
Good info but also a sales pitch.........you're a business. You said a stock motor could break the OEM clutch basket. You neglected to say a stock motor will only break the stock clutch basket if you abuse your bike frequently, doing burn outs and wheelies and clutch dumps. There's no shortage of master builders easily found on youtube with many decades of experience that will tell you the stock clutch basket even on a stage 2 motor will hold up just fine for most people. Only the extreme abusers risk clutch basket failures and you know this. Just like the stock cam chest with late 2019/2020 and newer oil pump is more than adequate for stage 2 builds and many big bore builds. You have great how to videos for those that need it but your channel is also a sales pitch. I don't blame you as it's how you make your living, but so many people think they need everything you sell and most do not.
@gregoryelliott8521Ай бұрын
Great Job! No way I could do this by myself. Would love to have you put a cam in my Breakout.
@TuckerSpeed477Ай бұрын
We can do that!
@d.sandell2555Ай бұрын
Man O War comp to stiff your clutch basket will be your new comp.. Baker manual chain tensioner, best their is IF your crank is straight... Chain oscillation will kill bearings. Engine pulse that is not adequately absorbed will kill clutch baskets and transmission teeth... I know it's hard to hear but your stock comp with polished billet tool steel ramp and a zero run out, plugged and welded crank with proper service of spring pack is the Bugatti set up for smooth trouble free longevity... I also recommend Bell Ray heavy duty CONVENTIONAL ONLY ATF fluid for primary. 🛑(NEVER USE SYNTHETIC FLUID IN PRIMARY REGARDLESS OF WHAT YOUR CLUTCH MANUFACTURER TELLS YOU!!) 👀 Man O War comp would be great for competition, glued services only, bikes that are pulled apart regularly... The Man O War is a slightly softer version of a solid comp delete sprocket. 🏁🏁🏁
@GetItGaryАй бұрын
It was an absolute success, you guys did a great job 👏
@Riker-eq2yvАй бұрын
Great video but has annoying music running in the back ground
@supermanclark35Ай бұрын
What are the dyno numbers
@TuckerSpeed477Ай бұрын
We did a follow up video going over the dyno results. kzfaq.info/get/bejne/edSpa9mb3ti2Zqs.html
@davidbourne287Ай бұрын
that thing needs an fxr dash
@JCunningham21Ай бұрын
In my 128 with stock valve springs and a .475 lift cam the s&s quickies rubbed the tubes.
@JCunningham21Ай бұрын
you need adjustable pushrods to find out what solid pushrods you need. 😁
@LevixwelchАй бұрын
Such a good time. Can’t wait till next year
@cameronbartley6139Ай бұрын
What about the tntake gaskets. ?
@edwinbrown3303Ай бұрын
Thanks, good information. After doing the 1K service at the dealer, I didn't get anything but a 600$ oil change.
@BigSkyImageryАй бұрын
I just received mine today and noticed the parts zip tied to shock. If I install the with o ring/ c ring facing out, then it looks like I have two right shocks. They are identical. Is this normal?
@shanewoolsey940Ай бұрын
Correct me if I'm wrong but wasn't the first FXR a stripped down bagger with a sportster front end?