Thanks I've been working a lot on my courses and I am also thinking about changing the name to my RC park to( Ditch-it Rc Crawler Park ) what ya think

That's cool. Sounds like a good name change

I just might take the TRX4 out for a night crawl

@@redneckrccrawlers9825 heck yeah I'd like to see your course at night. That be really cool

Yea I wanna get the body lights on and gotta get my light bar hooked up

Yeah just wait till I get it remodeled hope it turns out as good as it looks in my head lol 😆

@@redneckrccrawlers9825 can't wait to see it.

Yea they are really nice trucks out the box just loosen the suspension all the way out and put some weighted rims on good to go I want to put some brass on the portal covers to help with side killing a bit more

@@redneckrccrawlers9825 seems to crawl really good though

@@hellofromsoutheastalaskarc7517 yes they do I love the fact you can lock the diffs and u have 2 speed trans

@@redneckrccrawlers9825 I've never had either one of those on an RC.

@@hellofromsoutheastalaskarc7517 yea that was one of the big things that pulled me to this truck I was going to get the ecto I want the black ecto truck that can be scratched and scuffed up to make it look old and rustic or just see the battle scars on would be cool

Hello and thanks for your comment! I have bought a new esc and motor and put in it it has a castle creations sidewinder 3 esc with a 7700kv castle creations motor the motor esc was around 150$ when I got it but you can find cheaper setups. If you want a fast setup make sure to get a brushless motor and esc setup with a high kv motor

@@redneckrccrawlers9825I deff appreciate tht so that’s all u switched an it up the speed a lil cuz out of box is a lil slow ik it’s a crawler but I need a bit more speed for it to wheelie an tht

@@JamesCarter-zh7gp if you still want to rock crawl but have some decent wheel speed get the hobbywing fusion 2300kv you will love it lots of wheel speed and u can still crawl slow if you want this setup I have is just flat out fast there is no crawling with it

I wouldn’t mind tht eaither though looks fun atleast till I find a nice crawling spot

It won't let me post a pic but both my front and rear driveshafts are hooked straight across from one another and the driveshaft coming from the gearbox should be on one with nothing across from it

@@redneckrccrawlers9825 do you have instagram

@@redneckrccrawlers9825 I even looked at the pictures of the chassis planetary gearbox kit and I have it hooked up the same way as the picture shows.

@@redneckrccrawlers9825 I fixed it. I had to turn my gearbox around. Kinda makes me feel a bit stupid lol.

@@Webb4RC oh ok ur talking about the transfer case the gearbox is what the motor is attached to

Your drive shafts are hooked up wrong give me a few and I will take a pic of mine and show you how they go

The gearbox drive shaft and the front drive shaft sounds like it needs flipped around to me

@@redneckrccrawlers9825 the number of shafts you have on your gearbox in the center of you crawler is different than mine looks like you have more. On mine I have 2 shafts side my side and on the other side I have 2 shafts one on one side on one on the end there isn’t one in the middle except for the two that’s next to each other.

@@redneckrccrawlers9825 bro this thing is so quiet I can barley hear it running. I don’t like the bumper mounted servo thing though. When I run over a rock the front tires turn without me turning them it’s very sloopy.

@Webb4RC you need a pan hard link it keeps the chassis from moving when trying to turn

No bud you can't flip the gearbox around and the servo hitting the back of the motor will not hurt anything mine has been like that with no issues I wouldn't go drilling into it no need to

@@redneckrccrawlers9825 ok. Thing is I can run it as is but I can only get 1 screw on each side of the bumper. With that being said the bumper moves up and down so that’s clearly not gonna work. I have got to make it where the can isn’t hitting the back of my servo. I just flipped my center transmission lol I guess I’ll have to flip it back round.

@@Webb4RC I only have one screw one each side as well but with those tight my bumper don't move like I said I've been running mine for a long while like that with winches hooked up an all with no problems

@@redneckrccrawlers9825 hmmm mine is tight also but i can grab the front and move it up and down. Hell I’ll probably just run the bumper backwards. I’ll most likely drill s few holes and move the tranny forward about 5mm.

Your good you can't put the motor planetary gears in backwards your going to love the crawl ability of the motor and with the front mounting gearbox it opens up a lot more possibilities for scale body's with interior I'm glad I could help you out I know my build videos suck I'm not good at explaining stuff but I do what I can lol

@@redneckrccrawlers9825 I just noticed something that might be an issue. I can twist the bumper with the servo on it. There is only one screw on each side but I can still move the bumper up and down.

@@redneckrccrawlers9825 dude you do a great job making videos! You can’t read people’s minds bub. You’re very good at explaining things and answering people’s questions quickly even on an old video!

@@Webb4RC thanks that means a lot

@@redneckrccrawlers9825 yes sir! Keep doing what your doing you help a lot of people and also give people ideas 👍🏻

I took my bumper an servo mount if you look there is two screws on each side move it up and only use the front screw hole it allows just enough room to get it in there that's how I did mine I'm at work but will do a quick video to show you when I get home if you need to see exactly what I am talking about

Also you will love the hobbywing fusion it's very smooth and has nice control

That’s exactly what I done. I am running into another issue. My prefixal drive shaft is hard to turn when I loosen the screws on top and bottom that hold the motor on it turns easy only when they are tight is when the shaft is very hard to turn I have to use pliers. I didn’t turn it but about half mm just to see. My motor shaft isn’t bent. Did you have that issue?

I don’t wanna send this kit back but I paid $100 bucks for this damn thing. To be honest this kit is worth about 30 bucks! I might send it back anyway and just go with a LCG transmission. But I’m curious if you ran into that problem. If I can fix it I’ll keep it. Also there should be 4 screw holes instead of one on top and one on the bottom.

@@Webb4RC yes the hobbywing fusion will work like I said you need to move your front bumper mount up and I forgot to mention you have to shave down the motor shaft just a hair to get the motor to go all the way in to where you can get the top and bottom screws in and I love this setup other than those two issues I have had no other problems and I am still running it today as my class one truck and it works very well

Lol at that point I wasn't worried about the gate I was just trying to get thru lol the new rock layout I definitely gotta resituate some of those rocks but I want to try it with 2.2 tires first so I will run my F-150 on it before I change anything thanks for watching and good eye

What you think of the new rock layout

@@redneckrccrawlers9825 it's pretty badass. It looks like a a lot of fun. Nice long course

@@hellofromsoutheastalaskarc7517 yes I have 4 different courses all about the same length course 2 might be the shortest one and then I have a trail course just for trail runs that's as long as all 4 courses together lol it's definitely an all day thing if you want to run on them all

Yes you will need a set of body mounts or make your own that's what I did with the old side posts from an Everest 10

Do you use magnets? To hold the body on? I have the jeep wrangler tube body by Injora and I’m gonna use magnets. I just hope I can get the bumper of the jeep to set on the chassis and have no gaps.

@@Webb4RC no I have body posts that stick up thru my body I am running a Chevy square body on mine

Cool beans. I can’t wait to get mine finished. To be honest I spent enough money on mine to have bought a very very nice one.

@@Webb4RC I love the Injora chassis with prefixal gearbox I did have to shave the end of my motor shaft it was a hair to long on both axial 27t motor and my 2n1 hobbywing fusion se

Thanks it's a very fun place to go if you like that type of crawling with the big boulders thanks for watching

Thanks I want a defender body lol I ordered a complete light kit an it ended up being for the defender instead of the Ford truck thank you for watching much appreciated part two will be out in a couple days

Very much 😊

Thank you my friend 🙂 it's a fun truck to be out trailing with for sure

Oh yha Indeed my Friend 🐼👌🏻

Yea Im not really a Ford fan but I do like the look a lot. Thanks for Watching and the Like

@@redneckrccrawlers9825 what rims and tires are you running

Thanks love the axles they are really nice and adds extra weight down low where you want it I am working on a new build now and been working on my scale park getting ready for the summer!! thanks for watching!!!

Been going ok here been having some nice weather so I have been working on my scale park getting it ready for the summer

Yea I really like the unlocking diffs on the TRX4 it's my go to trail truck my Everest 10 is still around kinda parted out lol i would like to put it back together they are nice Crawlers thanks for watching and checking out the channel

Thanks does a lot better with that heavy Hummer body off of it I liked the look of the Hummer but definitely did a number on the performance part lol thanks for watching

Thanks I really like them and they was only like 80$ compared to the 110$ I paid for the red set but I really like them they are smooth and quiet thanks for checking out the video that first climb is definitely more challenging with that rock out of the here now and the second climb was very nice wasn't expecting to get up it so quickly but I do like them landmines lol

It's no longer a Everest 10 the only thing I'm using is the links I have a Injora chassis with the prefixal gearbox up front instead of in the middle I have a few videos on it just gotta scroll thru them to find them

Yes I love how quiet the hobbywing fusion is and I can't wait to show the new rig off been working on it off camera as it's to frustrating to try an video the build as I am making stuff work together as I go and with the body being more a 1/12 scale makes it more difficult I had to order 275mm links and I'm having trouble making them work as they seem to long as well but I will figure it out eventually lol thanks for watching

Nice thanks hope you enjoyed the vid

@@redneckrccrawlers9825 o it was awesome. I got a injora 1/10 chassis but can't find the right body for it. All the ones I got where to short. It's 313mm chassis

Thank you new crawler build coming soon with one of the new bright jeep heavy metal Rc body's should be pretty wicked when done stay tuned in for that

WoW ❤😮❤ Great news!!! Looking forward to watch 🐼🐻‍❄️👌🏻

Yes I am happy with the bumper if I take off the big round lights I can get it closer to the body which I think I might do that will give a better approach angle and the jeep hard body is for a completely different build it will have a home made chassis as it is a little smaller than a 1/10 scale I had to get links size 275mm in length which I am hoping is short enough thanks for the comment an stay tuned for the build project should be good I hope lol

Thank you it use to be a lot better if you look back in older videos you will see it use to be all trees and nice shade look back in some my group crawls thank you for subscribeing hope you enjoy some the videos I have a new build coming up to

Thanks I love the way the bumper looks can't wait for the light kit to come in and to test out the new servo gotta be better than stock can't wait to start my new build to. Should look good when done love the green on that jeep body

Thanks I will be putting together my new bright heavy metal jeep body with real metal panels it's supposed to be a 1/10 scale rc but it's more like a 1/12 had to order shorter links and shocks stay tuned for that should be a fun project build

Thank you just got done swapping out front bumper and adding a rc4wd winch to it

Thanks I have some parts coming in to start my jeep build stay tuned so you don't miss hit that 🔔 so you know when I upload thanks for watching and for the awesome comment!!

Thanks I try an make them challenging hopefully the water goes down and I can get the parts for my injora build want to get that ready for comp season