Thank you for video, please can you explain how did you do lion ? So nice ?
@Puyax0114 күн бұрын
Is this a diode o co2?
@HouseOfLasers14 күн бұрын
which part? Cut is Co2 Engraving is a Fiber Galvo
@chrisashdown8814Ай бұрын
I have a 10W diode and still a basic learner using MDF and mm can you give me a reasonable speed and power to get started with so i can progress from
@vincentlekei1969Ай бұрын
Nice I have a 5W diode laser what setting would be good for that on glass?
@patnelson54362 ай бұрын
How do you prevent the path from burning?
@ThunderLaserUSA2 ай бұрын
You must covert the text to path then delete the pathlayer or use T1 or T2(tool layer) so its no seen as "cut" layer
@NatesToolbox2 ай бұрын
Fiber laser is the machine you want for this job. my 30W obliterates Brick and stone and if you go slow enough which is still way faster than CO2 it melts into a nice dark black.
@Coopdeville062 ай бұрын
When I right click it doesn’t say anything about apply to path.
@Coopdeville062 ай бұрын
Is this only available for paid versions?
@HouseOfLasers2 ай бұрын
There is only a 30Day trial with all the features and the paid version. There isnt a free version
@tobymay312 ай бұрын
Would be cool if parts of the November Thunder event was recorded or streamed for those that didn't get registered in time to fill the slots.
@friedrichmandel25742 ай бұрын
Hi, I would rather enlarge first, then sharpen. This avoids enlarging the sharpening artifacts.
@DAVIDWHORF3 ай бұрын
Other than MDF
@DAVIDWHORF3 ай бұрын
Just curious what do you recommend for the type of wood to do this kind of work Mama thank you
@steinbierz3 ай бұрын
Great video…thanks!
@toshy5843 ай бұрын
Intro music far too loud, so i turn music down, cant here him speak. please adjust your volumes
@stephanedompmartin20514 ай бұрын
Thanks for the comparison! I'm hesitating between the Thunder Bolt and the Xtool P2. Can you also provide me with the cutting depth limits on more thick plywood. I understand that the Xtool P2 is better in this respect...
@1-Nice-Guy15 күн бұрын
I hate everything about Xtool, but I do feel the P2 will smoke the Bolt when it comes to cutting thicker than 1/8" wood and acrylic. The Bolt is great for engraving, cutting will usually require more passes compared to the P2.
@punkeasy4 ай бұрын
Why dou you have the time of acrylic in the thumb. Can we use acrylic.
@PateRanchCreations4 ай бұрын
Great video Loco
@HouseOfLasers4 ай бұрын
Thank you!! I try...
@vincentlekei19694 ай бұрын
Wow Yes 🙌 this helps thanks dude 😮
@blueskyjax5 ай бұрын
Can you do a video with the bolt cutting and engraving clear acrylic?
@jaykay89755 ай бұрын
Brother... Is it safe to engrave on those painted tiles?? Are they emanating any toxic gases? Pls enlighten
@Justanotherviewer895 ай бұрын
I’d like to see it compared to real word applications as a smoke exhaust fan for a 20x20x8 standard garage (ie cigar smoke) garage door closed.
@JAWSFREE5 ай бұрын
what size machine was this done on?
@HouseOfLasers5 ай бұрын
It’s in the title Nova 63/130
@hansonprofile5 ай бұрын
Why not just use the sublayer feature to line and fill the same object?
@HouseOfLasers5 ай бұрын
Sublayers were very difficult to use when this video was made.. since they weren't available yet.. That came on the final release of LBRN for Galvo.This was the first Beta version.
@7BlackOx5 ай бұрын
0.5 mm/sec vs 2nm sec - is definitely NOT "quite the same speed", it's 4 times!
@Bkinsman27193 ай бұрын
But it’s with a 2 lens not 4 lens.
@nwmi4935 ай бұрын
Nice custom mods to the fiber
@robr95215 ай бұрын
Thank you for a great video. I did have a question based on comments I have seen in other discussions though. If you take off the extension for the 4 inch lens, couldn't you be potentially clipping the beam through the tip at the upper part of the hourglass rather than it having thinned enough to fully fit through the hole or is that really not an issue with the way that particular barrel and tip are spec'd?
@HouseOfLasers5 ай бұрын
I can see this as a small possibility, but until we see a negative impact, split beam, shadowing etc.. i would not be concerned. But since we are using this as an engraving lens at this point to clear objects, I would use the larger opening nozzle.
@randysinclair87575 ай бұрын
thanks for the explanation! good information
@kellyklaask7su9906 ай бұрын
I've been trying to come up with a reasonable explanation for the flaking as well. You seem to have hit the nail on the head. Nothing you can do about it other than clean it off. It's too bad because the frosty look you get with it on really looks cool but it isn't going to stay.
@HouseOfLasers5 ай бұрын
Focus 2mm from the glass and that will give you a sand blasted result. The beam interacts a bit differently.. but all in all we are fracturing the glass and it is very hard to get rid of the flaking. Focusing in was the only way I found to work
@janinelew24836 ай бұрын
Thank you so much for helping me get my Bolt set up! Your videos are so easy to follow. You are a great teacher!
@HouseOfLasers6 ай бұрын
Thank you for mentioning it.. it means a lot.! Enjoy your bolt!
@eloiseramos88766 ай бұрын
Can it be use with lightburn
@eloiseramos88766 ай бұрын
Can it be used with the RA2 pro
@LizardsandLasers6 ай бұрын
How many passes did it take to cut through that thick acrylic? I'm also assuming it was run at full power.
@calvinflowers3697 ай бұрын
very cool, thank you
@davycrochet95697 ай бұрын
Very good instruction and very helpful. Although the background music is annoying. Just my opinion though other's may like it.
@chammockutube7 ай бұрын
What were your settings?
@musicandthewalk7 ай бұрын
Have you tried thicker ply's?
@reidjensen5697 ай бұрын
Very helpful! Thank You!
@briantully48767 ай бұрын
I’m going to be giving this ago
@samstegall58798 ай бұрын
is that black paint you put on the back of the engrave? What is the process ?
@HouseOfLasers8 ай бұрын
If you watch my video on Leveling up your photos it will all be explained.
@samstegall58798 ай бұрын
Thanks I will look for that video . @@HouseOfLasers
@aphleesegurtra28208 ай бұрын
Cool video! mind telling where you sourced the reducer for the 10" fan?
@ThunderLaserUSA8 ай бұрын
Amazon.. what don't they have, Right?
@aphleesegurtra28208 ай бұрын
@@ThunderLaserUSA more specifically; what type/make, etc... I'm looking to get a 10x8 for my T10 and I've found some; however, a few seem to be of questionable quality, did you seal that reducer with a gasket or tape of sorts, or is it just lapped correctly(to avoid potential leaks/air resistance). Thanks for replying!
@Alex-ft1df8 ай бұрын
Nice so thats where the fan is at. I always thought that the fan was in the vent shaft but I guess it isnt.
@wife2aviator8 ай бұрын
Well that sucked for me lmao. Great video. my Thunder is 51/130 and I just caught fire the acrylic. So that setting is too slow for my machine. NOT YOUR FAULT, it was mine. I should have paid attention to what machine you said you had. Will try again. Learned a lot and it wasn't as easy as I thought it would be either. THank you for the video.
@HouseOfLasers8 ай бұрын
At the time of the video I was likely in INCH rather than MM.. For photos i do not exceed 300mm and usually very low power 10-14%
@BitSmythe8 ай бұрын
NO need to say "what's up guys and girls."
@HouseOfLasers8 ай бұрын
Then i guess, equally no reason to say "no need to say" But, Last i checked Im making my videos that help people.. not to be criticized about things that mean absolutely nothing. That fact you stopped in to say something about it speaks volumes.Right Andrew?
@BitSmythe8 ай бұрын
@@HouseOfLasers Sorry, was in a rush for a job. You’ve got great vids and helped me, thanks.
@darciecarpenter48878 ай бұрын
New to the laser world and this is exactly what i have been looking for. Wanting to do a few images with this technique! I love the black in the deeper parts of the images , like the lion you did! Super excited.
@BigHWorks9 ай бұрын
Chris, great video, thank you. When engraving glass what air pressure do you use, high or low? Context - do you high for cooling?
@shadowrob77099 ай бұрын
RF laser tubes and then stepper motors make no sense to me at all. The beam expander for such a small machine is also not needed. The cutting performance of the machine will not be particularly good with it.
@kelliarmstrong84309 ай бұрын
I got everything up to the “intersect” & paste. When I paste, it puts the same 1/2, not the other. What am I doing wrong?
@MrRenoman20119 ай бұрын
Great Video
@chai128349 ай бұрын
Still waiting for my Bolt. Do you know what setting can be done to achieve this with Thunder Bolt and Rotoboss? Thank you in advance.
@bigfranksworld9 ай бұрын
Can you explain how you did the bending text? I got lost there. Thanks.