Nice sprinkler system, covers a large area.

Can it even be considered a impact sprinkler at that point 😂 you could replace the end fun on a pivot with that

This old guy is in beautiful shape. It runs perfectly, and you capture it beautifully.

Would you say you get 360 degrees of mist around those mist nozzles? I've got a very small mist system I'm trialing and can't seem to get 360 coverage, just trying to figure out where I'm going wrong

An oldie and still goodie! 👍

Dear Daran, we don't need to talk about your pump and your fabulous test site. Enviable! Thank you for always converting what is actually happening for us Europeans.

That’s a nice RB 80 that runs extremely well on your set up! It really puts out a great looking amount of water with wonderful distance and coverage! Just curious if you know the nozzle sizes? Thanks for sharing!

Nice RB 80. It seem the original heads with only fulcrum pin and driving off the nozzle shank the 70 too turns slow, it must not transmit the driving force as well as the later heads with the two post upper body, it may have to do with not enough gap between the stream and the nozzle shank, which limits the force from the arm when it cuts into the stream of water and forced close before water flowing to the spoon drives it into another cycle. I have a few of these but have never ran one of them..... we use the 80B/C site a bit but haven't set one of these up. I believe this was called the 80"special" with the Range Tube for a bit increased diameter and added coverage. Thanks for sharing! I see your trees are growing nicely!

Nice #80. It has some nice distance and coverage. Runs well off your setup. I have one but I think the drive nozzle is a 7/32". Mine also is a slow turner too. Where did you find this one?

Like is given..! I love the sound of impact sprinklers. Once I had to translate a Joni Mitchell song for a non garden person that did not understand the phrase:" the hissing of summer lawns.

Eso es hermoso, pero para evitar la fuga por viento y l evaporación por el sol, es recomemdable regar de noche 😊

Water pump

Oh my god! This sprinkler I saw while I was doing a water play!

Thanks. That was certainly straightforward and helpful. What AWG wire did you use, by the way? No crimping tool or spare wire or connectors on my bench, so before I spend money on all that, I think I'll go with an original bulb!

Poppy to see you on your own and I can get her to see you will try to find a new phone to see what you want for a good time to do you a good way of doing the same as it 😂😂😂😂😂😂😂

👍😋😋💨

I wonder if this impact is made by Sime... The design looks similar. A smaller version of my Senior. And your pump kicks that arm back like mine do. The thing i noticed about these impact guns is the pronounced "click" of the trip mechanism when the sprinkler reaches the end of it's arc. Mine especially is VERY loud. And even over the pumps you can hear it in the video. The spring they use to trip the sprinkler for reverse must be pretty strong. Both of the videos of the Sime senior guns I have on my channel you can very well hear the "click" when tripped. I think mine had not much use, it has marks and stuff on it but still in great shape. I hope to one day get its bigger bro the "Synkro" Its a wedge drive with a stream diffuser system that moves a wire clip into the stream every so often during forward and reverse. Also since its a wedge drive it reverses slowly like a SR gun.

Amazing 💯👍

All you need now is a hose reel! And you can set a sprinkler in the field and have the reel pull it towards it and shut off when it's done. I would love to get one for myself but i have no where to put it. Those reels are massive!

That's another great sprinkler.

wow you have 70 PSI on that little head? Whats the max PSI your pump can put out?

Oldie but still goodie. Have a great weekend. 👍

That's in great shape, runs really well, and is beautifully captured.

Nice Nelson P35. It really has great coverage along with the nice speed of the movement. Thanks for sharing…

I like the design of the walla walla impacts. The boxy look of the drive arm and spoon. Also this is a very quick returner! It runs well! Thank you for sharing. Where'd you find it ?

Nice P35. I had no idea those existed. Looks like a small version of my P85.

It's nozzle pipe rest all space magnet force push pull suction

Thanks for sharing, very nice!👍✨

There is satisfaction to watching the mechanical precision in motion! Another LIKE for your video!

I knew something went on inside the greenhouses - but I had no idea! Like John says below, they are popular in Florida... I find them to be very interesting... another LIKE for your video!

outstanding excellent work space

Seriously satisfying to watch industrial size sprinklers in action! Another LIKE on your video!

I need one this 😘

Such a beautiful and efficient sprinkler system, and it covers a very large area.

That looks nice and efficient.

They are very popular here in Florida.👍

A nice full circle impact sprinkler and all the way from Germany. 👍

Fascinating. I love the control system!

Que caudal de agua minima necesita? Gracias

Very nice misting system!

Nice sprinkler! It has nice movement with excellent coverage! Great job on creating the adapter. Thanks for sharing!

That's original. If I wasn't so lazy, there would already be a little movie about the Tegtmeier nozzle. It works exactly like the one you showed. A certain Tegtmeier claims to have developed it in Hanover in 1948. He applied for a patent for the nozzle in Germany. It was frequently mentioned in German irrigation literature in the 1950s and 1960s and praised for its fine spray mist. For me, it's always interesting to ask: Which manufacturer was inspired by whom?

Interesting how the stream from the impact nozzle gets completely absorbed by the massive range nozzle. It almost gives the water pattern the look of a gear driven sprinkler head.

I need your stand. As it would be easier to set up than my stand. Mine sticks in the ground and unless i position the legs right and spread out it tips over. Also this head kind of reminds me of my buckner 10601, except the rear spreader. Where did you pick this up at? Also i see part of mechanism on the back that is used for a PC version. Oh nvm thats the spreader port. Wonder if theres a PC version of this head ?

Reminds me of the sprays used on the fresh produce section at the store. Very gentle very fine mist sprayed on the lettuce, etc. works good!

Nice perrot! Kinda reminds me of toro a bit as well. The range nozzle gets out there pretty far !

A great video. Thanks to your perfect adapter and this wonderful pump, I was able to see the LVZR in action. This seems to be a great sprinkler. Thanks for the effort.

Wow... very coo video, sprinkler and set up!!!

Nice work overcoming the international thread issue! Perrot makes very interesting looking impacts, and this one works great on your stand! Really great video!

Very nice! I saw a system like this in Hal Wellmiers rhododendron nursery, he took over from his parents, Clem and Trudy. Unfortunately those plants fell prey to 2 larger nurseries doing tissue culture. Those two are also gone now, it is a shame.