There should be a button on the top that also moves sideways. When pressed it allow you to view the images

How far can you use it

When do you start selling kits? One of the nicest machines I've seen ANYWHERE!

New Sub 😁🎉❤😊

I'm motivated again to get my started project out of the basement. Thanks for the great video.

Nice design and impressive work

hey man great work. Can you please share more details about ULN2003 and how to wire it up, the wiring diagram you give is little bit messy.

how much distance can that camera scan ? There are 110 horizontal and 75 vertical degree scanning in data sheet but I couldn't notice any length that identified

looks great but BUT , the music is sooo LOUD... fix that mate :)

thank you for sharing. I got a similar cnc and I would like to ask you if I can use GRBL in order to send the job to the machine. Thank you for any help.

Thanks for doing this video. For some reason, NONE of the other tech channels have done a review on these. And I've been wanting to know if they really work.

I want to play scrolling text in multi language wled how work. ?

😎 awesome

Thanks mate 😊

THANK YOU SO MUCH!!!

The machine looks great hats off your effort for putting it . May i know what will be the expected cost for build this CNC

how can we build this cnc sir! is it open source or need to buy it from you

3d files for the donut led project? Available? Purchase?

Thanks for the video. Love to see how well this can mill copper PCBs, any one tried that?

I wonder if you could help me with my dilemma? I built a CNC Plasma table and control it with an MKS DLC32 V2.1 board (with built in Wi-Fi) and Open Builds Control (which I really like). OB will run the g-code file just fine as long as the plasma machine (pilot arc) isn't turned on. Once the plasma cutter fires the CNC machine freaks out and ends up either stopping with the torch still firing, or it takes off in some random direction - and OB responds with a lost port error and I need to reconnect. Obviously this is an EMI issue. I've tried numerous shielding, grounding, and isolation methods with no luck. However, if I load the g-code file onto an SD card, insert it in the control board's card slot, and run the g-code on the card from the "MK Laser" app on my phone, I can get a successful cut - but this also has drawbacks as the MK Laser app doesn't have z-axis control (I hear it used to) and the Z-axis height changes once the g-code starts to run. Messing with the MK Laser app to get it working this way is just a huge PIA and I would prefer to have the code being executed from inside OB. What I would like to try is controlling the MKS DLC32 board via Wi-Fi through the Open Builds Control software, but OB doesn't find the board when I scan networks. I've read in the forums that OB uses "telnet?" and would need GrblHal to be installed on the MKS board. I've also read FluidNC might work. But this is where things start to get over my head. Nevertheless, I'm convinced I could flash my board with either GrblHal or FluidNC (maybe even old ESP?) but I would need to get some very simplistic instructions on what steps I need to take to accomplish this. I realize a better card with ethernet or parallel connectivity would be a smart alternative, but I'd really like to see if I could get this card to pull it off. If you could assist me without boggling my mind with too much tech jargon (since I'm over 60 and this stuff will surely not attach to my brain neurons without many reiterations of the same info) I would very much appreciate it. For me simple is like this: go to ___ and find ___ and open it and then navigate to ___ and place it in ___ by dragging to ___ and then... After you do that then go to ___ and download ___ and then open the folder named ___ and then... etc. Thanks! Robert H. (a struggling newbie in the world of files and configurations and other seemingly complex operations)

👏🏾😳💌🫡

Your opening sequence is brilliant! You should consider making longer videos that are just like that. I'd love to add that to a playlist of music and art that I use as a screensaver and background music.

Great concept with the dust boot! I would like to give this dust boot a try, but the file I downloaded only contains the connection to the vacuum hose and the head, but not the connector you showed in the video that connects it to the CNC. Where is this located?

Thanks for the video. I need to change the standard engine ports for board development reasons. In this case, do I use the recording medium via the Arduino IDE?

Love it Myles! they all look incredible

Thanks again for all your help.

Еще один сырой принтер, но ему это не простительно, цена слишком высока для этого. К1 лучше по соотношению цена-качество-возможности.

Thanks for your reply. I have closed and reopened it a few times same thing needs internet. So do I understand correctly that that will not go away even if purchased?

My question I downloaded rabbit just to try it when I open it it requires log in and internet connection is this part of purchased program or just the demo

You have amazing skills!!! I am really impressed and your explanations are really clear : thank so much!!! Would it be possible to ask you questions privately about how I could improve mine please?

Very cool projects man. Love the look of them. Very unique.

The intro is brilliant! The lighting, robot, music all worked so well! Keep up the cinematic work!

ESP32 breakout board and the headers don't line up? What kind of CRAP is that? GARBAGE! UNACCEPTABLE!

J'adore !!!

can this cut carbon fiber sheets?

Can I install multi-color printing here ?

and did you have yyxza yaml file for tinybee cnc router

hi how can i upload YMAL file to Tinybee controller?

hi can you send me grble Pinout for the ESP32 thanks

Hi there! How do you center ensuring the engraving goes exactly where it needs to on the dog tag?

Wow! Thank you! Didn't know that stock to leave trick.

Thanks for the video!!! in order to run the .nc file do i need to connect my computer and esp32 to the same wifi? Or can I run it by just connecting the micro usb from the esp32 to my computer? I've got all my .nc files saved on an micro sd card.

Every shot is so 'cinematic' that you cant see wtf is going on at all, I just want to see where/how the rails are mounted, whats the ball screw block positioning etc. etc. but I feel like im watching a teen drama series

this is awesome, thank you !!!

I seen some video where a TFT screen works but the poster gives no info. Does anybody know how it's done

wow

Nifty machine! Can you add a spindle/router and CNC wood? You've got a vacuum so I assume so, would have been nice to see that in action. It's a really clean system!

😢lots of potential points of obselescents : wifi router, windows proprietary upload software....

only what i need my DIY machine have this biggest and better spindle. all other have same, motors, but i use DM 556 drivers can use biggest possiple nema 23 motors. and i use old cheap paraller port 10$ controller board, cheap and can use 2 paraller port easy, usb port controller have all too lot problems and not can use safety REALTIME controller. mesa card whit ethernet have perfect but too expensive hobby user and DIY builders.

i made under beam led light similar but i use ready to use aluminium U-profile were have channel bush in led. light strip and top profile have diffuser plastic. cost 4$ only/meter , and easy install some screw to beam.