If i bought the truck and parts how much would you charge me to build one almost identical? Lol
@user-sn6hy2xu7cАй бұрын
LOL, I just dont have the time anymore. I have a 2014 RAM 1500 with the same ISB170 and an 8 speed auto that I'm trying to finish in 2025 that will be for sale. ;>)
@hallocz312 ай бұрын
i know its an old video but did you had to change the engine mounts?
@nolanmartin19632 ай бұрын
can you tell me where you found the kit for the oil filter thank you
@nolanmartin19632 ай бұрын
can you tell me where you found the kit for the oil filter thank you
@tavofiore3 ай бұрын
Top speed?
@user-sn6hy2xu7c3 ай бұрын
Whatever top speed is on a Ranger. It has similar power with the TDI so should have same performance.
@robertbell5373 ай бұрын
I have a 2011 3.7 auto 4x4 I'm thinking of doing a swap my question is how did you get your transfer case to work after you did the swap because if I'm not mistaken the ECM and TCM are 1 unit
@user-sn6hy2xu7c3 ай бұрын
2011 is going to have even more Canbus control making it harder, I had 4X4 high but not 4X4 low. Are you going to stay with the auto? The hard part is getting the ECU/TCM to realize there is an engine running. That is my problem with the 2014 RAM1500 that I'm working on now. I have the Hemi crank sensor installed on the Cummins but still missing something to get the ECU to confirm a running engine. I used HP Tuners to turn off most of the engine sensors including cam but it's still not recognizing a running engine.
@robertbell5373 ай бұрын
Yeah it would be an auto I'm thinking of a TDI or maybe a smaller Cat or kubota
@user-sn6hy2xu7c3 ай бұрын
@@robertbell537 I have done a few TDI swaps and I would not do a Dakota. Just too heavy and too much load for the TDI. The JKU one that I did is a bit of a slug and works that TDI hard on long hills. The Dakota is at least a few hundred pounds heavier than the JKU. Engine to trans adapters are always something to consider when doing a swap unless you have the machines to do that. Also aftermarket performance upgrades are nice to have when dropping a smaller diesel into a larger truck.
@indalesioperez31464 ай бұрын
Du you truck is automatic transmission
@samarch21895 ай бұрын
What type of fuel economy do you get in your truck?
@ofdtdconversions84455 ай бұрын
12-13L/100km
@jordanmercredi37405 ай бұрын
What transmission does it have?
@ofdtdconversions84455 ай бұрын
NV4500
@jpsgarage20205 ай бұрын
Where did you get the cam and head bolts . Do you have part #
@ofdtdconversions84455 ай бұрын
I used a set of studs from a 24V Cummins and the cam is a stage 2 from Colt.
@jpsgarage20205 ай бұрын
@@ofdtdconversions8445 is the cam made for a 4B or is it made specially for these isb
@user-sn6hy2xu7c5 ай бұрын
@@jpsgarage2020 ISB
@MrStroller4u5 ай бұрын
How much? Take my money!
@ofdtdconversions84455 ай бұрын
Glad you like it. Sold just after that video was uploaded. Just about finished a 2014 RAM 1500 with the same Cummins ISB170 but with the 8 speed auto.
@jonathangarzon27987 ай бұрын
Besides whats on your website can you do an actual list of whats needed?
@robbyjohnson96848 ай бұрын
Absolutely gorgeous truck, and I love his consistency. It can be hard to find 4bt's, and instead of putting any old motor in, not only did he get a 4bt, but he got a 4bt that would have come original in the truck had dodge ever made a cummins dakota. Bravo, this make me want to do my own swap.
@SidedumpDon10 ай бұрын
How did you get the old filter in that location
@a.baronred.28711 ай бұрын
Impresionante. Tengo una aqui en Colombia 🇨🇴 suramerica pienso cambiarle el motor bo se si tu caja es la misma automática o le colocaste otra y si fue asi cual le adaptaste.
@peterdew1765 Жыл бұрын
Awesome build, I’ve read the full build thread, and looking to do this myself on my 4.0 XJ, what did you do in regards to the intank fuel pump?
@silasjayy1222 Жыл бұрын
Where did you buy the bumpers ? And if you built them do you have blueprints ? Or measurements?
@aRedFrog Жыл бұрын
Ive always wanted to do a 4bt Dakota swap and i just put it off for years. Seen this video awhile back convinced me to do the 3rd gen so proud to say now a proud owner of a 2010.
@heyyoubuddy6749 Жыл бұрын
Looks nice and clean. To me looks like a BEW,BHW,BRM. Engine. Love the look and sound. Thanks for sharing, God bless.
@jgetscensored7837 Жыл бұрын
That thing is done up right! Well done
@christopherguerrero7656 Жыл бұрын
long shot but any way i can contact you? i picked up a 2002 isb170 and have a few questions
@RebirthMusicStudios Жыл бұрын
What's the mpg like?
@upnorthyooper1196 Жыл бұрын
Nice job! I am building a truck with that engine, I would like to know what you did to the ECU.
@kaydebagwell3756 Жыл бұрын
Did you have to make any changes to the firewall to get the engine to fit? I remember having to do some serious work to get a 5.9 in my ‘04
@E_JIM3N3Z11b Жыл бұрын
This beast is tough. I want. What's the total build cost?
@winru22 жыл бұрын
Did you have to modify the driveshaft at all?
@billyray47162 жыл бұрын
What was wrong with the 4.7?
@wafflehousechevy2 жыл бұрын
Such a sweet swap. Any chance you can share some details about adapting cummins to ZF transmission?
@wafflehousechevy2 жыл бұрын
Hey, I'm trying to do the same swap, anyway I can contact you?
@wafflehousechevy2 жыл бұрын
Looking for details on the Ram ISB170 swap. Commented on the 4BTswaps page, my ecodiesel spun a rod bearing looking to do what you did with ISB170 and keep ZF8HP75 transmission.
@4rubberzaday6 ай бұрын
Go bmw m57. Adapters for the 8 speed are available and standalone ecu for the m57 are available
@2JFlores3 ай бұрын
@@4rubberzadayare you saying it’s better to go with m57 engine or trans? Bit confused on what you meant
@Mr_Santo52 жыл бұрын
Man that's beast. Impressive work.
@spicylime35532 жыл бұрын
What is that in
@dysateit55712 жыл бұрын
Amazing 😱😱😱
@juanfranciscocastro20362 жыл бұрын
What Track bar are you using? Doing the same swap with ALH to my Xj I ordered the Adaptor from Td conversions.
@crs_19_irock312 жыл бұрын
How much can it tow now you did that look good btw
@ofdtdconversions84452 жыл бұрын
Its towed our 20' 5th wheel all over North America for 7 years, about 4500lbs and don't really know its there. Also gets about 22MPG towing.
@knockitoff76482 жыл бұрын
Was that bumper custom? It looks almost OEM! Really good looking
@ofdtdconversions84452 жыл бұрын
Thanks, yes they were built here in the shop along with the side steps.
@jordanmercredi37402 жыл бұрын
What type of tubing do you use on bumper
@81brassglass792 жыл бұрын
I want to do this to mine sooo bad 🍻
@thewildclan61922 жыл бұрын
So what do I need to do to the education to get this to run or is it just bolt in and crank up
@RobertAdairWorkshop2 жыл бұрын
I always thought the third gen Dakota’s looked a bit goofy. The changes you made make this truck look great. It’s the best looking 3rd gen I’ve seen. Nice work.
@ofdtdconversions84452 жыл бұрын
Thanks, I don't like the 05-07 but the changes to the 08+ trucks made a nice change
@robbyjohnson96848 ай бұрын
i couldn't agree more. what a beautiful job he's done to that truck.
@powmanmoto2 жыл бұрын
Beautiful. I am looking into doing a 2.8 swap into my 2002 dakota quad cab 3.9 v6 with the nv3500 5 speed 4×4.
@ofdtdconversions84452 жыл бұрын
Way cheaper to do the 2L VW TDI and probably better power. A few guys have done them in Dakota's and they work well. We have one in an 08 JKU and love the 30 MPG fuel economy. TDC will have the adapter for that. us.tdconversions.com/dodge
@livebaitadventures4202 жыл бұрын
Are you running a getrag 238 transmission or something a bit beefier
@ofdtdconversions84452 жыл бұрын
The stock ZF8HP70
@livebaitadventures4202 жыл бұрын
@@ofdtdconversions8445 nice! How’s it holding up so far? Any MPG numbers yet?
@livebaitadventures4202 жыл бұрын
@@ofdtdconversions8445 do you have the details on those badass bumpers as well?
@ofdtdconversions84452 жыл бұрын
@@livebaitadventures420 Just a 4 hr trip towing our 5th wheel and it was doing 16MPG. Still have trans programming to do which should get me another 2-3 MPG.
@ofdtdconversions84452 жыл бұрын
@@livebaitadventures420 I built the Dakota bumpers and the RAM has VICE bumpers www.vicedesign.ca/collections/bumpers
@Truckerdaddy2 жыл бұрын
That thing is sick.
@livebaitadventures4202 жыл бұрын
Beautiful
@chrisking72552 жыл бұрын
Very clean !!!
@jakeg86392 жыл бұрын
Where did you get your tune from?
@ofdtdconversions84452 жыл бұрын
If you need a tune your welcome to email me. randy@tdconversions
@louisjames26542 жыл бұрын
Where did you get the 2 inch suspension lift from?
@ofdtdconversions84452 жыл бұрын
The front is just the 2" leveling spacers and the rear is done with the air bags. The front diff was dropped to give more oil pan clearance so the axle geometry is still good.
@louisjames26542 жыл бұрын
@@ofdtdconversions8445 awesome!! I was just wondering because I’m thinking about lifting my dakota and putting some bigger wheels and tires on it
@ofdtdconversions84452 жыл бұрын
@@louisjames2654 Here is the complete build dodgeforum.com/forum/3rd-gen-dakota-general-discussion/316318-the-truck-dodge-should-have-built.html
@Kryzvlogs2 жыл бұрын
Where did u get the body lift from?
@pontiacmaniac22 жыл бұрын
Would love to do this to my 06 when the 4.7 gives up.
@kuhndog-11962 жыл бұрын
Getting closer
@kuhndog-11962 жыл бұрын
Dude that truck is badass! Makes me want to buy a third gen dakota haha. Where did you pick up a ISB170? What did they come in?
@ofdtdconversions84452 жыл бұрын
Thanks, those engines were in delivery vans like UPS trucks in 2000-2004? You can find them online at truck wreckers. Just about have my new one finished. 2014 Ram 1500 with the same ISB170 and the 8 speed auto.
@kuhndog-11962 жыл бұрын
@@ofdtdconversions8445 that's awesome man. I have a 99 Durango that I want to diesel swap. It's my mountain vehicle and tows my pop up. Was looking at the r2.8 but I really like the power potential of these 170's never even heard of them until today. What did you pay for one? And did you get the factory harness and computer?
@kuhndog-11962 жыл бұрын
@@ofdtdconversions8445 also can't wait to see the ram!
@ofdtdconversions84452 жыл бұрын
@@kuhndog-1196 Usually pick up the whole van for under $4K, most came with Allison's behind them.
@kuhndog-11962 жыл бұрын
@@ofdtdconversions8445 I will have to look into that. What kind of mpg you get with this?