RoTheInstaller

Пікірлер

@lucky-il5kj 7 сағат бұрын

The amp senses a signal when a signal passes through the speaker wire to the high level input on the amp

@MakingArtwithMrsGordon Күн бұрын

That's HOT!! Looks awesome! It should have always been blacked out. Great job Ro! I need you to come do my car next! 😆

@rotheinstaller Күн бұрын

@MakingArtwithMrsGordon sure! I can do that. Just message me on IG @ Ro_g90 so we can work out the details. Also, thanks for watching !

@af2504 4 күн бұрын

Good job!

@rotheinstaller 4 күн бұрын

@af2504 Thank you!

@rafi1718898 4 күн бұрын

You got a fallower out of me I got a CRV2024 but out here in NYC everything is way more expensive to do keep the videos coming

@rotheinstaller 4 күн бұрын

@rafi1718898 I appreciate that, and thank you for the support. Let me know what else you would like to see..

@infinitypvpmayhem 5 күн бұрын

Just had these installed. Seems like the left one is put in wrong and the light is facing up not down towards the grown like the right one. Do you think this is possible or is it defective? Left one is illuminating upwards like high beams instead of downwards!

@rotheinstaller 5 күн бұрын

@@infinitypvpmayhem yes it's possible. They just need to be aimed properly. The adjuster is on the light itself

@ASHLEYMARIE1287 5 күн бұрын

Please contact me!!! This is the only video I’ve seen about my exact car and getting through to the firewall!!! I have so many questions!!

@rotheinstaller 5 күн бұрын

@@ASHLEYMARIE1287 contact me on IG instagram.com/ro_g90?igsh=aDMxNHRpdXgzOGxi

@cppctek 7 күн бұрын

Have you had any mpg decrease ? I always wondered how much less mpg you’d get on a hybrid esp if you run a larger amp

@rotheinstaller 6 күн бұрын

@cppctek no I didn't

@realcity2919 7 күн бұрын

Ariight ! Thanks broski

@MrJmCebu 8 күн бұрын

Are the fog bulb replaceable and what type bulb does it use?

@rotheinstaller 8 күн бұрын

@MrJmCebu you can, but I don't know the type of bulb, and you can get them on aliexpress

@alloushalaa770 9 күн бұрын

great job, where did get the motor from

@rotheinstaller 8 күн бұрын

@@alloushalaa770 got it from mikstoreph.com

@MakingArtwithMrsGordon 9 күн бұрын

Nice intro!!

@KampingxKidz 10 күн бұрын

Does the bumper need to be removed to install this part? I got mine coming in next montg

@rotheinstaller 10 күн бұрын

@KampingxKidz I don't think so, but it was much easier to deal with when it's off

@edwinolivera5595 10 күн бұрын

Hey what’s up man. Does it the system mess up the hybrid battery? I was told get an external battery

@rotheinstaller 10 күн бұрын

@edwinolivera5595 I can't say it does or doesn't. I have no issues with mine. Also, I'm only using an 800w amp with a 12inch kicker. I'm coming up on a year with mine and no issues.

@a122345 12 күн бұрын

So do I understand you correctly that I only need to buy the low tone horn?

@rotheinstaller 12 күн бұрын

@a122345 Yes, that's all you need to get, and also, the Y splitter cable

@ahmediftekhar2503 12 күн бұрын

Can you make a video on how to change the real turn signals for Hyundai Tucson n line 2023/24

@rotheinstaller 12 күн бұрын

@ahmediftekhar2503 I'm sorry, but I don't have that SUV at my disposal. My videos are done with my personal vehicles

@cglomez5230 13 күн бұрын

Just one wire connected both speakers to the head unit?

@vladimirprokop6257 16 күн бұрын

I also don't like the original horn on my Honda civic and bought a dualhorn. I think this will probably be a much bigger problem than replacing the rear blinker bulbs with LED lights with a series resistor. Can you show a detailed disassembly of the entire front of the car? Thanks

@rotheinstaller 16 күн бұрын

@vladimirprokop6257 Check out my foglight video for the front end removal

@JayLato 17 күн бұрын

Note: test before putting it all back together 😂 . Good video

@lionintu 17 күн бұрын

These seem to be the OEM fog lights the CRV offers in Australia

@rotheinstaller 10 күн бұрын

@@lionintu they are replicas

@andikalaoh3130 18 күн бұрын

nice video from me, I have civic 2023 , need relay horn to installed? thank you

@rotheinstaller 18 күн бұрын

@andikalaoh3130 you don't need a relay, just go ahead an swap the horns out

@darkchocolate2x372 20 күн бұрын

Hey man, how did you make that wire and what type of connector is that on the end?

@rotheinstaller 20 күн бұрын

@@darkchocolate2x372 I used regular speaker wires. The connector at the end, I think I had ordered them from Japan

@darkchocolate2x372 16 күн бұрын

Thanks 🙏🏾

@darkchocolate2x372 8 күн бұрын

For that connector at the end, do you have a name for it or a part numbet?

@darkchocolate2x372 8 күн бұрын

I just did this install but instead of using that connector i just splice onto to my driver side door speaker, but when i turn the volume up there white noise coming from the back speaker i just added so i guess i need to use that connector

@rotheinstaller 8 күн бұрын

@@darkchocolate2x372 are you referring to the connector behind the radio?

@JimG27 22 күн бұрын

Thank you for this. Did the same thing on my car. Your way is easier than the instructions from the dealer lol.

@RicardoGutierrez-b5z 25 күн бұрын

I bought the kit and the switch but my installation did not work. I installed the fog lights on the bumper and everything ok. I bought the six pin hole switch and nothing. I believe I need help with the wiring. Any additional guidance will be appreciated. I love the installation of your wiring. Thank you

@rotheinstaller 24 күн бұрын

@RicardoGutierrez-b5z hit me up on Instagram @ro_g90

@RicardoGutierrez-b5z 22 күн бұрын

Can you send the link?

@RicardoGutierrez-b5z 22 күн бұрын

I’m asking for a link because there are 4 people with the same username. Thanks for answering back

@rotheinstaller 22 күн бұрын

@RicardoGutierrez-b5z instagram.com/ro_g90?igsh=aDMxNHRpdXgzOGxi

@RicardoGutierrez-b5z 11 күн бұрын

Mr Ro, I didn’t contacted you back on instagram because I found the problem with my connections at the steering. Now the fog lights are functioning properly. I really appreciate your fast response. Very nice and clever wiring!

@lionintu 26 күн бұрын

Adding the fog like stalk doesnt magically add the fog light "light" to the dash does it?

@rotheinstaller 26 күн бұрын

@@lionintu unfortunately it doesn't 😊

@lionintu 26 күн бұрын

@@rotheinstaller still it's a great upgrade

@rotheinstaller 26 күн бұрын

@lionintu it is. It gives a great look to the front end

@lionintu 26 күн бұрын

Brother you did an awesome job with this installation . Excellent documentation as well.

@rotheinstaller 26 күн бұрын

@lionintu thank you! I appreciate the feedback. I was hoping it was transparent enough for my viewers to understand. All I ask in return is for you to subscribe to my channel. I have more content coming soon

@lionintu 26 күн бұрын

Nice job man

@rotheinstaller 26 күн бұрын

@@lionintu thank you!

@TerryBousha 26 күн бұрын

I could not get the radar sensors to fit into the retaining brackets included in MIkstore's sensor relocation kit. Did you have to modify them? The factory retainers are different and have slots in them for the ribs on the sensors.

@rotheinstaller 26 күн бұрын

@TerryBousha Yes, you have to trim the tabs that click in the sensor retainer

@ajch1153 27 күн бұрын

I want the module. Please😊

@rotheinstaller 27 күн бұрын

@ajch1153 the module is long gone.... I'm sorry 😊

@ztekz 29 күн бұрын

Wow that’s a lot of work to just gain 2 tiny lights at the bottom of the bumper. No thanks…

@lionintu 26 күн бұрын

Have you seen the even tinier lights on the cx-5? These r fine. Question is, do they work

@rotheinstaller 26 күн бұрын

@lionintu they do work. I have another video with photos. You can check it out

@lionintu 26 күн бұрын

@@rotheinstaller thank you and you wouldn't happen to be located near New York City would you?

@rotheinstaller 26 күн бұрын

@@lionintuunfortunately I'm not. I'm in Chicago

@a122345 Ай бұрын

What is the bolt size to mount the second horn?

@rotheinstaller Ай бұрын

@a122345 I'm not sure, but here is the part number 95701-0801607. The bolt I used is not OEM, I had it laying around in my garage.

@ericaandeurelmaddox4018 Ай бұрын

did you have to disconnect the ANC? I keep seeing stuff about the ANC.

@rotheinstaller Ай бұрын

@@ericaandeurelmaddox4018 I did have to disconnect it. I was getting distortion in the bass.

@BMBangladesh Ай бұрын

I have a 2024 CRV EX-L with parking sensors in the front, will this part number work?

@rotheinstaller Ай бұрын

@BMBangladesh I have another video showing how to move the sensors. Just browse my channel, and you'll find it

@nahlho1807 Ай бұрын

How much did it cost including parts and labors?

@rotheinstaller Ай бұрын

@nahlho1807 I didn't buy the kit. It was sponsored, and I installed it myself. I think it will cost about $400 for everything tho... I'm not sure. I do have the lights for sale, not including the stalk. $150

@oswini6936 Ай бұрын

Escuse my question, im a noob at this i just started, Okay so i have a accord 24 ex, i bought a kicker 12 inch, and a kicker 800 amp and the lc2i pro for the loc , from what im understanding, i need to disconnect the anc to avoid distortion? , and where do you recommend connecting the lc2i to? How much of a difference is wiring from the rear trunk and front door speakers? Is it a big enough difference where its worth the hassle of finding out a way to wire it from the front door speaker to the trunk? Last question so i only saw you hooked up to one speaker, are you not supposed to hook up to the right and left speaker for optimal performance or am i just stupid

@rotheinstaller Ай бұрын

@oswini6936 only disconnect it if you have distortion, you may not need to. Definitely connect it to the front speaker. The output is way greater than the rear. It's definitely worth the extra effort. You don't have to connect to both speakers , just connect both channels of the l2ci to one speaker (2 positive and 2 negative)

@oswini6936 Ай бұрын

@rotheinstaller oh okay so when im tapping from the front speakers, I still need to tap into the right door side and left door side speakers? Or just one like u said with the back speakers, how did you end up wiring yours ? Any tips for wiring to the front?

@rotheinstaller Ай бұрын

@@oswini6936 wire the front the same way as the back. Just use one speaker. Use the passenger side as you will have more space to work with. Again, connect both channels of the lc2i to only one speaker. 2 positive (lc2i) to positive (speaker) and 2 negative (lc2i) to negative (speaker). If still unclear, hit me up on Instagram @ro_g90 for more info

@oswini6936 Ай бұрын

@@rotheinstalleralright bet thank you bro

@promotionelista2780 Ай бұрын

what city are you in? and how much does installation cost?

@rotheinstaller Ай бұрын

@promotionelista2780 I'm in Chicago. It's about 250-300

@promotionelista2780 Ай бұрын

Hello. I don’t understand, that wire that you pull through the arch, where does it go? didn't show in the video. And where does it connect?

@rotheinstaller Ай бұрын

@promotionelista2780 that's the wire from the fog light. It's the red wire I connected in the car

@FaiyazBhuiyan-e7g Ай бұрын

You're a legend bro. Also, where did you buy the OEM stock? Would you be able to put the links to all of the parts in the description?

@rotheinstaller Ай бұрын

@FaiyazBhuiyan-e7g I picked it at my local honda dealership. It's from the civic touring/sport touring, integra. I'll put the link in the description.

@monchi3121 Ай бұрын

Hello my fuse harness just have too white wiring and my relay have 4 wiring, white, red, blue and black what i can do in this case

@rotheinstaller Ай бұрын

@monchi3121 if you want it to work like mine , join the blue and white together

@rotheinstaller Ай бұрын

If you want to wire it like mine , join the blue and white together

@monchi3121 Ай бұрын

What about that white conector with the red wire u disconnect from the fuse box of the car ? Where i can get it and where that other red wiring coming from “I guess its from the other half of the fog light harness! “

@rotheinstaller Ай бұрын

@@monchi3121 call me on Instagram @ro_g90

@Marcus_B_Reyes Ай бұрын

Will be installing mine tomorrow on my wifes car thanks for the video

@rotheinstaller Ай бұрын

@@Marcus_B_Reyes thanks for watching!

@jackleung4519 Ай бұрын

@@rotheinstaller did you sell the harness wires. It is different one that you did last one with CRV Blue color

@rotheinstaller Ай бұрын

@@jackleung4519 it's the same harness

@jackleung4519 Ай бұрын

@@rotheinstaller oh I saw the video and you mentioned about blue and white wires with fuse box

@bicicaptura Ай бұрын

why honda does this!!!! omg so complicated

@jackleung4519 Ай бұрын

Good job

@rotheinstaller Ай бұрын

@@jackleung4519 thank you!

@guitarhero9592 Ай бұрын

Looks great! Thanks for showing how to remove and apply the emblems. I have a white accord and changing the chrome to matte black to match the black matte wheels. Gonna buy a chrome set and paint them.

@rotheinstaller Ай бұрын

@guitarhero9592 Thank you for watching!.

@Spliff610 Ай бұрын

Can you send me the module I have the ex and this will help me out

@rotheinstaller Ай бұрын

@Spliff610 I had given it away a long time ago. You can purchase it from Amazon tho. Just search for USB A module, and it will pop up.

@rymurata Ай бұрын

2025 Crv will come standard with dual horns. However, will still need aftermarket Y cable to make them work on 24,23,22 etc

@evanowens3773 Ай бұрын

Will this damage the car I was told by crutchfield anything over 30 amps will damage it and if so have you had any problems??

@rotheinstaller Ай бұрын

@evanowens3773 I'm not sure about what damage can happen, but I've had mine for almost a year now and have no issues. I am also using an amp that is very efficient and doesn't pull alot of electricity. If you're unsure, just add a capacitor to your setup

@RicardoGutierrez-b5z 2 ай бұрын

Would this kit fit a 2023 Honda crv exl or, it’s specifically only for the hybrid? Thanks

@rotheinstaller 2 ай бұрын

@RicardoGutierrez-b5z it works on all trim levels

@RicardoGutierrez-b5z 2 ай бұрын

Would this kit fit a 2023 Honda crv exl or, it’s specifically only for the hybrid? Thanks

@bryanflores1977 2 ай бұрын

can u pls give us the link where we can buy your 8 pin adaptor ?

@rotheinstaller 2 ай бұрын

@bryanflores1977 are you referring to the plug and play adapter for the camera?

@bryanflores1977 2 ай бұрын

@@rotheinstaller Yes

@rotheinstaller 2 ай бұрын

@@bryanflores1977 I don't have a link. I had found it on aliexpress. I messaged the seller directly and had them sell me the adapter only. Other than that, you won't find it by itself.

@nspacentime 2 ай бұрын

God this gen is ugly

@tarheeljim 2 ай бұрын

What is the tool you used to remove the plastic cover?

@rotheinstaller 2 ай бұрын

@tarheeljim plastic trim removal tool. I bought the kit on Amazon.

@tarheeljim 2 ай бұрын

@@rotheinstaller Thanks!

@slowinfastout3304 Ай бұрын

Can I use a screw driver?

@rotheinstaller Ай бұрын

@@slowinfastout3304 you can use a flat head. It can't be too think tho

Ең жақсы KZfaq

Пікірлер