Пікірлер
@garyacey
@garyacey 11 сағат бұрын
Cool. I still have my RS4 Pro 2. I’ve kept mine because it was the car I used to win the biggest race I ever won. The Northeast HPI Challenge race 2000 in Enfield, CT.
@joespafford6499
@joespafford6499 Күн бұрын
At least a number of the screw bags with the I'm assuming parts bag numbers
@Androedoff
@Androedoff 2 күн бұрын
Hello bud, Do you think bingo wasp v2.0 for rmx can be joined with rr-820 rhino shark gearbox? I basically ordered shark and it might arrive tomorrow, but for some reason Im worried now that it might not fit without sharks bottom deck.. what are your thoughts on it?))
@Lukeghfa
@Lukeghfa 2 күн бұрын
Is this still the best beginner RC model to get in 2024?
@locmai7135
@locmai7135 2 күн бұрын
Can you tell me the esc setup and the angle you put the motor at?
@SeeFPv-qm6ie
@SeeFPv-qm6ie 4 күн бұрын
Can you use a brushless motor 540 size
@6bj032
@6bj032 5 күн бұрын
Would you please share your front end set up? I’m really curious on how you would fix the bump steer😬 thanks
@joespafford6499
@joespafford6499 7 күн бұрын
Looks beautiful, I'm going to have to get one. I only just ordered three racing Segura D5 chassis that's waiting for me to build in idaho. I'll be back in a week to do so. I have built the MST rmx 2.0 kit when I first came out. But it was a gift to my brother and I'm currently still working on getting it back as my brother had passed away
@joespafford6499
@joespafford6499 7 күн бұрын
Dude, soo excited, my friends call me crazy,i react similarly to yiu. Lol. Its awesome stuff
@joespafford6499
@joespafford6499 7 күн бұрын
Need this car in my Life 27:43
@joespafford6499
@joespafford6499 7 күн бұрын
Love your reaction through entire video, can hear the genuine reactions 💯16:56 could not agree more, wow that's amazing holy shit. Really stepping it up
@COOLRC2023
@COOLRC2023 8 күн бұрын
Wow very nice rc drift car....
@rc-trassa
@rc-trassa 8 күн бұрын
Very cool 🚘
@davidhess3320
@davidhess3320 9 күн бұрын
Hey nezo i got a question. Im thinking about purchasing yeahracing heatsink with dual fans. I got a 3 chan receiver and chan 3 is occupied with the gyros sensor wire. Can i pin the + & - wires of the fans into the gyros empty + & - pins? Will this mess with chan3 for the gyro? If not, would it be possible to get a y connection and use the esc (10bl120 g2) fan port for them?
@_.Lumi._
@_.Lumi._ 10 күн бұрын
Very cool! Which leads to me asking: what can you NOT drift?
@BadShoppe
@BadShoppe 10 күн бұрын
The limit is getting higher and higher :D
@stainblack9167
@stainblack9167 10 күн бұрын
Hey Nez0 when will the comparisson video of the MD 2.0 SD 2.0 and RD 2.0 come out :)
@BadShoppe
@BadShoppe 10 күн бұрын
Hello :) Well, I currently only have a RD 2.0 in my possession. The MD 2.0 and SD 2.0 i filmed have been sold off so not sure when but i would like to do that video!
@stainblack9167
@stainblack9167 9 күн бұрын
@@BadShoppe Ahh didn‘t know that, would be interessting to see and hear your opinion on the models compared to each other Also there is not much info out there in english yet
@GorillaFPV4life
@GorillaFPV4life 10 күн бұрын
Nice boat
@carlsenesbjerg
@carlsenesbjerg 10 күн бұрын
Amacing
@robinkesterlives
@robinkesterlives 10 күн бұрын
Thanks, this has been quite helpful on several occasions as I build mine. I mixed up ball 8 vs 12 (16?)mm ball ends, used the wrong screws in one spot, left out the one of the bearings in two different spots but its been a nice build otherwise. The manual is very confusing, esp the dark muddy images, in spots. But after about 5 hours Im at the shock build phase. Weeeee!
@BadShoppe
@BadShoppe 10 күн бұрын
Heck yiss! glad i could help :D
@muaythai193
@muaythai193 11 күн бұрын
Kyosho had 275mm wheelbase to play with, and still made the car too short and wide to be scale...hope that more and more companies will start making narrow main bodies and then using widebody fenders to reach standard width. So easy to do, and looks ten times better imo. MST (LBMT) & Aplastics (RS6) show how it's done, even with standard wheelbase copies of IRL cars that have a pretty long wb.
@Gavs_rc_hobbies
@Gavs_rc_hobbies 12 күн бұрын
The body roll reminds me of something you'd see in a cartoon. Pretty cool.
@BadShoppe
@BadShoppe 10 күн бұрын
yeah this is comedy setting lol
@TheMiniblazer
@TheMiniblazer 12 күн бұрын
Thank you very much my friend as always another beautiful video
@BadShoppe
@BadShoppe 12 күн бұрын
Heck yisss :D
@aldoelcreator5503
@aldoelcreator5503 12 күн бұрын
If it’s suspension from the 80s oh yeah it matches with a little 1jz motor swap things is slinging but if it’s real drift it’s supposed to be on coil overs hard af to rail lines and keep angle so in my conclusion that seems fun to drive if your trying to just have some fun and enjoy the day.
@BadShoppe
@BadShoppe 12 күн бұрын
yeah this wild lean mode was more of a "see what it does" thing for the laughs. Mike says it drives quite smoothly in normal mode :)
@poiseextinct
@poiseextinct 12 күн бұрын
Omg PUT A LIGHTNING MCQUEEN BODY ON IT ...that's the same pose he did in the movie 😅
@Brevdrift
@Brevdrift 12 күн бұрын
Love the American muscle 💪
@BadShoppe
@BadShoppe 12 күн бұрын
HeLL Yeaaaa BRoTHeRRRR :D :D :D Love me some V8 motor...anywhere in anything :)
@muaythai193
@muaythai193 11 күн бұрын
@@BadShoppe Now that I can agree with! ❤‍🔥
@cecropiamatt8522
@cecropiamatt8522 12 күн бұрын
Way too much weight shift… looks a little ridiculous lol. I’d put the foam back :p also it looks a little slow compared to the other cars where my lp absolutely hauls ass. It’s an absolute blast to chase people down with and I’m usually on their door. Such a fun chassis tho, I have honestly not even touched my rdx and shark since I’ve gotten it haha.
@hvnspd5
@hvnspd5 12 күн бұрын
Yeah it was for fun. The pads were really worn and I didn't have replacements so I just took them off. It's running a small 380 can motor with no boost or turbo or timing. It was strickly to see what would it look like and get a few laughs out of it.
@BeatsWithKev
@BeatsWithKev 12 күн бұрын
@@hvnspd5 Well I thought it was fun haha
@BadShoppe
@BadShoppe 12 күн бұрын
oh yiss this running was all for fun and laughs. The regular mode is quite nice to drive says Mike and is great for a nice cruise etc. Oh i see he replied :D It became a fun challenge to see how much pace i could achieve while leaning over like a sport bike :D Like it sorta remidned me of those full on driving arcade simulator rides that toss you around :D
@totallyrandomuser5760
@totallyrandomuser5760 12 күн бұрын
That's maybe too much weight shift, doesn't look realistic anymore
@hvnspd5
@hvnspd5 12 күн бұрын
It was for fun. Just wanted to see what it looked like without the pads to dampen the roll.
@BadShoppe
@BadShoppe 12 күн бұрын
yisss Mike tried some science and we couldn't stop laughing at it :D I loved it and tried to get the most pace possible while almost falling over :D TBH yiss its a bit unrealistic....car almost looks broken xD
@Isaac_cobo
@Isaac_cobo 12 күн бұрын
Hello I’m having the hardest time with the front wheels rubbing on the ball cup like you said. What knuckles would you recommend that would give me clearance ? Thank you I appreciate your help
@BadShoppe
@BadShoppe 12 күн бұрын
Hello :) Ok are you still using the stock wheels from the kit? If so, change them up to a higher offset because the stock ones are only 5mm offset and are not enough to clear the ball cup. If you like the stock wheel offset, use axle spacers between the wheel hex and the wheel to get more offset, use at least 2-3mm of spacers. Knuckles, you have many options, Reve-D did make a blog post about using their SG front knuckles on the D5-RR when it launched and achieved some nice results right away.
@Isaac_cobo
@Isaac_cobo 9 күн бұрын
@@BadShoppe thank you it worked! I appreciate it !
@TheMiniblazer
@TheMiniblazer 13 күн бұрын
Very hot nezo’s
@kAN_RC
@kAN_RC 14 күн бұрын
Do you use any gyro to stabilize your camera and have it point forward?
@BadShoppe
@BadShoppe 12 күн бұрын
On the camera cars no. I use a Go Pro Hero 4 Session Cube and a Hero 7 Black. This is the Hero 7 Black. Weirdly it looks like its on a gyro or something but i think the camera is just leaning over a bit when the car is sideways.
@timboE219
@timboE219 14 күн бұрын
how do you compare this to the bingo chassis, and have you tried the different flex configurations yet?
@BadShoppe
@BadShoppe 10 күн бұрын
So far I have not obtained a test chassis kit of my own to really test it and compare it. I drove another driver's car with carbon fury's newest hyperflex deck installed and it was quite good on p-tile. Both are highly effective and give great performance gains.
@GorillaFPV4life
@GorillaFPV4life 14 күн бұрын
Dang it. I have to get one of those now
@pankajjaiswal9896
@pankajjaiswal9896 14 күн бұрын
They should also have added a Data port so we could directly download all the data on a computer.
@BadShoppe
@BadShoppe 10 күн бұрын
that would have been nice yiss!
@hvnspd5
@hvnspd5 14 күн бұрын
The trike views are sick!
@peteranthony3134
@peteranthony3134 15 күн бұрын
What kind of wheels are those?
@rcstarz5206
@rcstarz5206 15 күн бұрын
Scale Dynamics. Great wheels.
@peteranthony3134
@peteranthony3134 15 күн бұрын
​@@rcstarz5206where can I buy those wheels?
@Time.2.Repent
@Time.2.Repent 15 күн бұрын
1st view sick
@darealkosmo
@darealkosmo 15 күн бұрын
"weird flex, but ok" 😅 that thing is wicked, can't wait to see you and Bruce sliding yours at Strickly!
@BadShoppe
@BadShoppe 10 күн бұрын
hehehehe right :D oh yea I will get one at some point whenever the next batch flows.
@totallyrandomuser5760
@totallyrandomuser5760 15 күн бұрын
I rebuilt my shocks last Friday, drifted on Saturday, checked shocks while replacing springs afterwards. Half of shaft rebound lost. Is it an o-ring problem?
@nitroxx_za1837
@nitroxx_za1837 14 күн бұрын
If you find your bottom end of your shock to be wet then ya it's possible it can be a o ring. I have had it once with a bladder that went bad as well
@BadShoppe
@BadShoppe 10 күн бұрын
0oooo dang, the o-ring might have gotten sliced when it was installed onto the shock shaft...if it was installed dry without oil or green slime grease then it is likely that the o-ring was damaged but he shock shaft threads. The other thing could be the the shocks lost too much oil when installing the top hat and cap. You can re-open the top of the shock and add some more oil back inside and re-bleed and re-install the top hat/cap and see if your rebound returns to full.
@DrifterAtHeart-Woocash
@DrifterAtHeart-Woocash 16 күн бұрын
Well spotted 🤘
@cecropiamatt8522
@cecropiamatt8522 16 күн бұрын
You didn’t bleep it!!
@BadShoppe
@BadShoppe 10 күн бұрын
i know shhhhhhhhhhhhhh lololololol
@joespafford6499
@joespafford6499 16 күн бұрын
Currently waiting on my chassis, haven't purchased body, if you could suggest good sites to start looking for a body, i love older body style, i.e. Datsun car and pickups. Awesome video. Thank you for the content
@BadShoppe
@BadShoppe 10 күн бұрын
You can check out ABC hobby, aplastics, MST and such for older car styles. Most retail hobby websites have large body selections to choose from. Thank you for watching!
@joespafford6499
@joespafford6499 9 күн бұрын
@@BadShoppe thank you for the response and video content. Always enjoy. So many bodies to choose from lol
@darealkosmo
@darealkosmo 16 күн бұрын
have fun boiz!!!
@Nibbler562
@Nibbler562 17 күн бұрын
Can you do a video on how to set the gyro up. Mine appears to blink blue and red ive seen some only bline blue.
@BadShoppe
@BadShoppe 10 күн бұрын
I can try too, i no longer have that car or the gyro form it. I remember people having difficulty with it and even Yokomo themselves replaced this gyro with their own YG-302 v2 in later batches of this particular RTR.
@peteranthony3134
@peteranthony3134 18 күн бұрын
What Yokomo chassis is your favorite?
@BadShoppe
@BadShoppe 10 күн бұрын
0o0o very good question. I still have a soft spot for my original release first patch 2016 YD-2 Plus (when there was only a "basic and plus" version of them)
@peteranthony3134
@peteranthony3134 18 күн бұрын
Which Yokomo chassis kit is considered the best one?
@BadShoppe
@BadShoppe 10 күн бұрын
hmm tough question: depends on bang for buck or out-of-box comparisons etc.
@cianu6
@cianu6 19 күн бұрын
In terms of upgrades. What is the route to go? Do a conversion to Shark or jump into an SD 2.0?
@BadShoppe
@BadShoppe 10 күн бұрын
RD 2.0 u can do anything really. SD 2.0 is also a weapon. I personally like both a lot but given the choice between RD and SD 2.0's i'd go SD 2.0. Between the Shark vs SD 2.0? ... Shark is a conversion kit car where as the SD 2.0 is a complete car.
@cianu6
@cianu6 9 күн бұрын
I already have the RD 2.0 I really like it a lot, the only issue I have with it is that my bell crank or my steering system for some reason gets loose and I have to be constantly adjusting and tightening it, that is why I want to know if is worth to do either a Shark conversion on it or just directly get and SD 2.0. Other than that everything else is working great and I am not even using fancy electronics. Thanks ❤
@edwinparani
@edwinparani 23 күн бұрын
How do you calibrate the reverse for this ESC, everythng works great but can't seem to get the reverse to calibrate?
@BadShoppe
@BadShoppe 10 күн бұрын
Reverse is calibrated and set during the standard calibration process. After that you much connect to the ESC via bluetooth and Breve 1.0 app to set driving mode to F/N/B/R...by default reverse is disabled.
@BadShoppe
@BadShoppe 10 күн бұрын
if it is not that, check your radio's channel 2 reverse settings. You may need to change that settings to get calibration to complete properly.
@edwinparani
@edwinparani 24 күн бұрын
That fan above the motor, how do you mount that?
@BadShoppe
@BadShoppe 10 күн бұрын
Apologies for the delay...the fan is double side taped to the receiver about the fan.
@edwinparani
@edwinparani 26 күн бұрын
I have everything you recommend for this 2.5 RTR, except using the Reve D ESC and 10.5 motor. You’re absolutely correct the Bingo Wasp can handle all the boost, unfortunately the rear transmission went out, I don’t they can handle the boost/turbo upgrade. Would you have a complete or upgrade transmission for sale?
@edwinparani
@edwinparani 26 күн бұрын
Or any recommendations?
@edwinparani
@edwinparani 25 күн бұрын
Ok my mistake, the gear box it’s fine, it was the ESC wire not plugged in all the way 😂
@edwinparani
@edwinparani 25 күн бұрын
Do you sell the fan mount like what you are using on this 2.5?
@BadShoppe
@BadShoppe 10 күн бұрын
Apologies for the delay...the fan is double side taped to the receiver about the fan.
@Lowcoupe
@Lowcoupe 29 күн бұрын
Would you recommend this or the carbon fury flex?
@BadShoppe
@BadShoppe 10 күн бұрын
I have more experience with the Bingo chassis rn vs the carbon fury so I would recommend Bingo first but carbon fury also works well.