Hi, Daniel. Could You share how to remowe jet needle fixator our of the slide? One of needles is not centered while fixed all the time looks to one side. Needle is allready worn out to the jet hole ant not round any more.
@dannyk1dАй бұрын
What year and model is your bike?
@JGHL3 ай бұрын
Good job. I miss change butterfly O ring
@maverick16855 ай бұрын
I'll be referring to this video once I receive my rebuild kit. Nice work. Love the before/after photos.
@MorningNapalm6 ай бұрын
Stunning work!
@jalex191006 ай бұрын
Good video! Thanks.
@vicensrosellballester85009 ай бұрын
Thanks 👍
@melroset-top913910 ай бұрын
Man, I cannot thank you enough for this video. Just getting into my bike for a full rebuild and want to do everything myself. I will watch this as I re-assemble. Subbed and thanks again.
@Jimbos195411 ай бұрын
I have a 1986 R80 that needs both carbs rebuilt. I just ordered the rebuild kits from Bob’s BMW. Are you interested in vapor blasting and rebuilding them? What is your process. Thanks
@alscyon11 ай бұрын
Merci pour ma r75
@rudyverheyde8037 Жыл бұрын
I found when i took my carbs apart that those large-long springs were missing......help!!
@jackmasi9753 Жыл бұрын
That was excellent
@peter6782 Жыл бұрын
Oh what😔 did you do that? of all the things i needed to watch was the needle circlip and adjustment i know they are usually simple but i cant get my head around mine, and what do you do you go speed things up to a million miles an hour 😔
@peter6782 Жыл бұрын
try using an extra long screwdriver the extra torch you get from the length of it is a great help .
@spencerharris830 Жыл бұрын
What blasting media do you use?? Good job with this too!
@dannyk1d Жыл бұрын
Very small glass bead 75-150 microns
@paulhoughtonhhoughton9188 Жыл бұрын
Hi, have you at any time adjusted the needle height? my boxer is running dead rich am wondering if the needle has been put back in at the wrong height, any thoughts, Thanks
@dannyk1d Жыл бұрын
It’s very easy to adjust the needle height. Most of the boxers have them in the third position from top (second from bottom) Have a look and see where yours are set.
@peter6782 Жыл бұрын
very good camera work , especially when i slowed it down, i will be using your video for my carb rebuild , thank you for doing this .
@user-pb4cx8yk5g Жыл бұрын
Traducir al español seria bueno para chile.para enterder mas
@loveplanes Жыл бұрын
Where are you located? Seems that you are in France…😮
@dannyk1d Жыл бұрын
No. I’m in the UK.
@paulhoughtonhhoughton9188 Жыл бұрын
Daniel nice informative video, Question: if I find my R75 runs rich (plugs nice n sooty) should I change the needle position? (air screws are currently 1/4 turn out, both carbs) thanks
@davebowles9023 Жыл бұрын
Thanks for the amazing detail. Should help me a lot with my airhead here in South Africa
@lucaantonelli596 Жыл бұрын
Outstanding video, thanks for sharing
@lucaantonelli596 Жыл бұрын
Great video!
@jjaeks5518 Жыл бұрын
Drones are cool but aint nothin like a set of rotors grabbing the slo mo from 30 ft away. so rad
@michaelperez81583 Жыл бұрын
These guys at this time took freestyle skiing to another level. This was even before Claim, which was one of the best MSP movies that brought Big Mountain skiing and Park skiing together in a way like no other.
@tomahorse Жыл бұрын
Pure craftsmanship. Thanks for sharing
@kurobisukou123 Жыл бұрын
Awesome awesome work. You def have a lot of patience working with all this carbs. Do you do rebuild for customers?
@kurobisukou123 Жыл бұрын
Btw, thank you for sharing!
@dannyk1d Жыл бұрын
I do. Hundreds upon hundreds.
@ethanhudson5439 Жыл бұрын
My favorite part was the Mickey Mouse music lol
@Britcheflee2 жыл бұрын
I found a bing 64/3213 at a thrift shop...thought I was doing good until I discovered that someone had broken off the small jet inside the shaft - a small remainder of the brass jet can be seen in the base of the shaft the small jet screws into. Any tips on how to remove this without damaging the carb for good?
@bobdelaplage6902 жыл бұрын
Hi mate, im from Belgium, enjoyed yr videos, is Germany a supplier of rebuilt kits? My motor stood still for too long, 10 years...i have to revive the rs 100, thanks for great info! Bob Belgium
@TxCxx2 жыл бұрын
How are you getting these shots? Is the camera between your arms?
@rustybaws2 жыл бұрын
Hi, great videos on these carbs, I've just watched them and see that you do this as a service. Do you have a website or any sort of business page I can have a gander at? I've recently got an 87 R100RS and one of the carbs is leaking and I am looking into getting all the parts to hopefully rebuild them but now I've seen how good they look after being vapour blasted I am considering this, so now not sure whether to get them completely done by you or just the blasting. I've seen you've put your phone number in a few older comments, is this still the same and do you still perform these rebuilds? Cheers, Russell.
@kuladeeluxe2 жыл бұрын
This is such a great song
@skou25042 жыл бұрын
Hey Daniel, really informative video. Do you mind telling us where you buy the parts from? Great video, thumbs up from Denmark :)
@cspark91862 жыл бұрын
Yes, beautiful. Fun to watch.
@ridz802 жыл бұрын
Artistic
@luanapierri2 жыл бұрын
Hi Daniel, I live in Brighton and am partly through rebuilding the Bing carbs from my R80 RT. Would you be able to vapour blast them, I have the kits etc just need cleaning.
@dannyk1d2 жыл бұрын
Hi. I’m in France at the moment. I’m back for the bike shed show next weekend. You can give me a call on 07977930136 and we can discuss.
@Hodado2 жыл бұрын
I love how everything comes apart so easily
@bellinmi2 жыл бұрын
Hey Daniel are all those small removable parts like the springs and lever arms aluminum like the main carb body?
@dannyk1d2 жыл бұрын
No. They are all plated steel.
@bobthebuilder44702 жыл бұрын
I think I will send you my carbs for rebuilding
@elywhinston65552 жыл бұрын
Hi Daniel Are you London based?
@dannyk1d2 жыл бұрын
Just seen your message, sorry. I’m in Brighton.
@paulnarramore68282 жыл бұрын
With the exception of the use of an adjustable spanner, dear me , that was really excellent. Thank you.
@dannyk1d2 жыл бұрын
Tell me about it, bothers me all the time. Literally the only time I’ve ever used it was when I filmed this, typical.
@sharingtheadventure2 жыл бұрын
Most excellent. I watched the entire video. Now, I have to research vapour blasting. LOL
@MavSpic2 жыл бұрын
Excellent video, I wasn’t bored once - that’s saying something! I was a bit intimidate to get my R65 carbs ripped apart and rebuilt but after watching this I’m very confident I can pull this off. Now to find someone to blast them here in west Texas… Why do you not recommend removing the butterfly plate? I’d like to do a complete rebuild as you did here since the damned thing is 37 years old.
@dannyk1d2 жыл бұрын
Only because it is a tricky job, but necessary for a full rebuild. I have another video on here which shows the process for removing the butterflies safely. It’s worth using a scribe or similar to mark the butterfly where the shaft runs through it before removing as a guide to help get the right position when you re instal. If that makes sense.
@gregoireoederlin2 жыл бұрын
hello how do you clean the aluminium of the carburetor? thank you !
@dannyk1d2 жыл бұрын
Vapour blasting. The only way to get these results.
@gregoireoederlin2 жыл бұрын
@@dannyk1d thank you very much
@MiniMie13832 жыл бұрын
Hi Daniel, do you clean and rebuild Carbs on request?
@MiniMie13832 жыл бұрын
Hi Daniel! Can I send you my 2 carbs for similar cleaning? I have a 1976 R75/6 with 2 bing carbs
@dannyk1d2 жыл бұрын
Hi. Sorry, I don’t often check the comments on KZfaq. But yes, if you still need your carbs sorted, I can do that for you. Easiest if you contact me direct on 07977930136 to discus.