8 ай бұрын
8 ай бұрын
2 жыл бұрын
Пікірлер
@natally09 3 күн бұрын
Is this on iron on vinyl? What type of paper? Or what exactly can I use this on? It doesn’t have to be mirrored right?
@ItsyBitsyBuild 3 күн бұрын
You can layer with whatever material you like, permanent vinyl, heat transfer vinyl, even cardstock. Any material where you want different colours layered on top. If you use HTV then it will need to be mirrored, especially if you add text.
@asmaanaitouali7924 4 күн бұрын
thank u ! what a great video I was hesitating between the scoring stylus and the wheel
@ItsyBitsyBuild 4 күн бұрын
Thanks for the support! ☺
@tonyrome068 6 күн бұрын
You're a genius
@gotyaphotocom 7 күн бұрын
Ok, NOBODY ever states if you can print out on the papers from any epson print ??? I have a Epson 7800 large format canvas printer , A 3880 photo printer and an Epson workforce 7840 office printer ??? Any of these work ??? I am wanting to print out my artwork making it wearable ???
@ItsyBitsyBuild 6 күн бұрын
You can use printable inkjet or laser jet heat transfer vinyl but it's still effectively made of paper so will eventually wash off. If you want long lasting, go with a sublimation printer or use layered heat transfer vinyl.
@lauragreer7950 7 күн бұрын
Thank you thank you!!! I appreciate you. You solved my problem!! ❤
@ItsyBitsyBuild 7 күн бұрын
I'm so glad to hear that! ☺
@normazaharioudakis115 12 күн бұрын
Such so smart thank you for sharing
@ItsyBitsyBuild 10 күн бұрын
Thanks for the support ☺
@AbbyAvon 19 күн бұрын
Question. I guess you have to have an adobe account to use background remover tool?
@ItsyBitsyBuild 19 күн бұрын
No you don't and an alternative free tool is remove.bg
@paulpardee 21 күн бұрын
Those are gorgeous! When applying the Mod Podge before the decal, do you let the Mod Podge dry first?
@ItsyBitsyBuild 21 күн бұрын
Thanks! Let the paint dry but the mod podge should be wet so it slides on easily. Hope that helps.
@paulpardee 21 күн бұрын
Absolutely saved my marriage! (Well... maybe not, but you made my wife very happy!) Great tips! Thanks so much!
@ItsyBitsyBuild 21 күн бұрын
Thanks for the support! ☺
@ClayBrickRoad 21 күн бұрын
Thank you for this. This is exactly what I was after in wanting to buy a cricut for my miniatures too! And love in mm not inches haha.
@ItsyBitsyBuild 21 күн бұрын
Aww I'm so glad. I have a few mini tutorials on my channel you might like too ☺
@ClayBrickRoad 21 күн бұрын
@@ItsyBitsyBuild will check it out! I am newish but love fellow Australian arts and crafters KZfaqrs so will support for sure 😀
@ReginaCreates2 28 күн бұрын
new Subscriber. Wow … Love this … thank you!! Like number 468 👍 🌹
@ItsyBitsyBuild 28 күн бұрын
Thanks for the support! ☺
@ReginaCreates2 28 күн бұрын
@@ItsyBitsyBuild 😊 ❤
@beckyzayas5749 Ай бұрын
You inspire our creativity. More videos, please.
@ItsyBitsyBuild Ай бұрын
Thank you so much! Let me know if there's any videos you'd like to see and I'll add them to my list.
@nycgweed Ай бұрын
You got my subscription with her the first literally 10 seconds for that damn woody call Paige
@amandajones6481 Ай бұрын
I LOVE the miniature pelmet/box valance you made in this video. It's exactly the sort of pelmet I want to make for my room box project, which is 1:12 scale. I don't have a Cricut machine though, so could you possibly let me know what the measurements are for the pelmet and curtains. Thank you so much. I think I'll save up to buy a Cricut, I didn't realise it could do so many different things. Lots of love from Amanda Jones in Australia
@ItsyBitsyBuild Ай бұрын
Thanks for the support. It's a bit difficult to give measurements because it depends on the size of the windows on your individual dollhouse. I'd recommend downloading cricut design space so you can view the project, each shape and the measurements in there. You don't need a Cricut to create a design space account so should be able to view the project and adjust the size according to your dollhouse Window dimensions, just make sure you follow the video instructions for resizing.
@emilykirkman5321 Ай бұрын
How do you do the reverse weeding for iron on vinyl
@ItsyBitsyBuild Ай бұрын
You can't. Htv comes with its own carrier sheet so it should be weeded directly from the carrier sheet.
@debbralehrman5957 Ай бұрын
Lovely🌺
@ItsyBitsyBuild Ай бұрын
Thank you ☺
@amigreene6781 Ай бұрын
I just cut the blinds and I just want to say thank you so much for everything I really don't have a lot of extra money to spare but I love my miniature dollhouse and you just made me love it even more thank you for being so giving
@ItsyBitsyBuild Ай бұрын
Aww your comment made my day, thank you so much for the support ☺
@samzam3828 Ай бұрын
Any advice on foam mini fonts
@ItsyBitsyBuild Ай бұрын
I'm assuming you mean foam sheets, they're notoriously difficult to cut and I've only had success using the rotary blade, unfortunately it doesn't cut tiny fonts. You could try adding a thicker offset to it to see if it helps.
@deniserobinson1679 Ай бұрын
This helped so much and now I know to buy and new Mac!
@ItsyBitsyBuild Ай бұрын
I'm so glad to hear that ☺
@susanwilliams8234 Ай бұрын
Thank you so kindly for making this!!!
@ItsyBitsyBuild Ай бұрын
You're welcome ☺
@josephandangelacastro3836 2 ай бұрын
so helpful!!! Thank you
@ItsyBitsyBuild 2 ай бұрын
Aww I'm so glad! ☺
@bmc195 2 ай бұрын
Thanks for this video, it was very helpful. I just used the washi sheet setting and it had very little stuff-ups. I only had 2-3 pieces come out
@ItsyBitsyBuild 2 ай бұрын
Good to hear! I'd definitely suggest buying some htvront vinyl if you haven't used it already. I never have issues with intricate cuts using that brand. Good luck! 🤞
@LindaBenefieldCreations 2 ай бұрын
OMG!! YOU SAVED MY LIFE!!!! THANK YOU SO SO SO MUCH!!!!!❤❤❤❤❤
@ItsyBitsyBuild 2 ай бұрын
Aww I'm so glad! 😍
@quinnyquinn8906 2 ай бұрын
The fine debossing tool will not detect in my Cricut maker 3. This is the second genuine part purchased from Spotlight and still not working. I have tried all trouble shooting, calling the helpline and still not working. The helpline couldn't figure it out, so they suggested the item was faulty and exchange for another embossing tip, which I did, and still doesn't work. Could the machine be faulty?
@ItsyBitsyBuild 2 ай бұрын
Quite a few people have reported tool detection issues since the last cricut design space update. I would contact cricut again and let them know that the issue persists and other users have reported this problem. If you're still under warranty, they should replace the machine as it's not working as advertised. Good luck!
@mizepinto6338 2 ай бұрын
Thank you so much for sharing this video😊
@ItsyBitsyBuild 2 ай бұрын
Thanks for supporting my work ☺
@daniellegarza2997 2 ай бұрын
What is the website your using ?
@ItsyBitsyBuild 2 ай бұрын
Sorry I'm not sure I understand your request. Are you wanting website links for buying the vinyl and blades?
@ericacastro-morrison4032 2 ай бұрын
What glue are you using?
@ItsyBitsyBuild 2 ай бұрын
For wood, I alternate dabbing wood glue and super glue. The wood glue takes a while to dry so the superglue keeps it held together during the drying process. For everything else I use Helmar's craft glue.
@ericacastro-morrison4032 2 ай бұрын
@@ItsyBitsyBuild oh ok! Thanks love the videos I’ve been binging them trying to decide if I wanna buy a cricut or silhouette for wood cutting minis.
@ItsyBitsyBuild 2 ай бұрын
@@ericacastro-morrison4032 thanks for supporting my channel! I hope you're able to find what you need and start your mini making journey 😍
@justt9507 2 ай бұрын
Thank u, I haven't really used my cricket very much. But you've encouraged me to get it out and try the photo one to make decal for my husband of his brother that has passed! ❤
@ItsyBitsyBuild 2 ай бұрын
I'm so sorry to hear about his passing but it sounds like a beautiful project. I'm sure he'll love that. Thanks for supporting my work ☺
@missie0619 2 ай бұрын
Do you have any recommendations for blades for the Cricut Joy Xtra? I am a newbie to the cutting machines and I have searched high and low for the answer to my question. Can’t even find it on Cricut’s website😩 Thank you for this video and your help! So useful
@ItsyBitsyBuild 2 ай бұрын
The joy xtra tools use the same tools as the joy so if you search cricut joy replacement blades on Amazon you should be able to find them. I hope that helps ☺
@frankielvandmac 2 ай бұрын
thank you this video was super helpful
@ItsyBitsyBuild 2 ай бұрын
That's great to hear, thanks! ☺
@fluffybum1344 2 ай бұрын
Genius
@jodeee1067 2 ай бұрын
Thank you so much for sharing.
@ItsyBitsyBuild 2 ай бұрын
You're welcome! I hope you were able to make some fun stickers of your own ☺
@debbiesolo 2 ай бұрын
The newer version timer is now 199 seconds
@ItsyBitsyBuild 2 ай бұрын
Thanks for letting me know ☺
@cassandras206 2 ай бұрын
OMG! 😱 This the cutest!!!! 😊
@cathwise1516 3 ай бұрын
Thankyou for this video very informative
@ItsyBitsyBuild 3 ай бұрын
Thanks for the support ☺
@kimwrona1716 3 ай бұрын
What type of glue do you use? Mine came in the mail today I look forward and your looks fabulous!
@ItsyBitsyBuild 3 ай бұрын
For most pieces, I use Helmar's craft glue in a fine tipped glue bottle. For wood, I use a dab of super glue to hold it in place temporarily and wood glue which takes longer to dry.
@apratimmadewithlove 3 ай бұрын
Hi Can you please send me how to convert drawing into one line drawing in cricut design space
@ItsyBitsyBuild 3 ай бұрын
If you're wanting to do single like writing, you'll need to look under cricut fonts and filter writing fonts to see them. With an image, you should be able to change it to pen and you can draw it with your Cricut.
@erinthomas8496 3 ай бұрын
Oh my goodness gracious Jennifer maker exclamation point my husband bought me a Chromebook for Christmas not knowing that it was not compatible with our machine and I just realized that my printer is not compatible with my ancient home computer that I've had since 2009 so I can't print to cut I can't even make stickers I love my machine but now I have to beg my husband to not only purchase a brand new inkjet printer but also a brand new home PC or laptop that is in fact compatible with my explore Air 2 Cricut Explore Air 2 it seems like I take two steps forward and 20 steps back why must technology be so difficult I'm ready to throw in the towel Jennifer maker
@ItsyBitsyBuild 3 ай бұрын
Sorry to hear it. Hopefully you'll be well on your way once these things get sorted.
@VaracolacidVesci 3 ай бұрын
Amazing tips. Like and sub earned
@ItsyBitsyBuild 3 ай бұрын
Thanks for the support ☺
@PrettyLittleLetters 3 ай бұрын
Thanks for this! You just saved me some money. I had a scoring stylus from my Explore but couldn’t find it and was just about to go and buy the scoring wheels now that I have a maker 3. I already have the deboss tip but have not used it yet and wondered if it would work for scoring. You answered my question. Thank you!
@ItsyBitsyBuild 3 ай бұрын
Yay I'm so glad to hear it! ☺
@lisabeck44 3 ай бұрын
I just got my new to me cricut explore air 2 from my step-daughter and I just could not figure out how to cut my own designs and you were the only one to explain it so I could understand and have success. Thank you!!!
@ItsyBitsyBuild 3 ай бұрын
Thank you for your lovely comment, it brightened my day! All the best with your Cricut journey ahead.
@MyBodyIsMyTemple 3 ай бұрын
Where do you purchase the contact sheet for the detail cuts? I’ve never used it, so I’m not familiar with what to look for exactly.
@ItsyBitsyBuild 3 ай бұрын
You can use whatever clear contact or vinyl you like.
@user-jw6cs9xd2d 3 ай бұрын
Does the cricut print? Or do you print on a printer first?
@ItsyBitsyBuild 3 ай бұрын
You need a separate printer. Cricuts can't print.
@kezi41 3 ай бұрын
What settings do you use for foamboard?
@ItsyBitsyBuild 3 ай бұрын
Hi there, I've personally not cut it as I haven't found any foam board thin enough but I'd suggest cutting it with the knife blade and on the posterboard setting.
@kezi41 3 ай бұрын
@@ItsyBitsyBuild thank you ☺️
@sabrinataljaard 4 ай бұрын
Thank you for this! It's such a clear explanation and side by side comparison. Bless you!
@ItsyBitsyBuild 4 ай бұрын
Thank you so much for supporting my channel.
@user-jv2pu9ei8p 4 ай бұрын
I wish this was as easy as what you said. So many things not stated still confussed. Thanks this will get me started.
@ItsyBitsyBuild 4 ай бұрын
Is there a specific area that youre struggling with?
@cforest36 4 ай бұрын
Thank you so much for this informative video. I have wanted the Cricut Auto press and have followed price reductions but could never justify the cost. I was a little skeptical of this press but your video and trusty advice has convinced me that it is a worthy investment. I am a part time crafter, looking to do more. I love your videos! You are not only very informative, objective and make things so much easier but your fun, sweet, down to earth spirit makes your videos very pleasant to watch. Thank you very much for reaching out to the rest of us, saving us time and money!
@ItsyBitsyBuild 4 ай бұрын
Thank you so much, Cindy. Your beautiful comment made my day. I really appreciate your support ☺
@Mustbesophia 4 ай бұрын
Thank you for your honest review. I already got the maker and definitely wasn't investing in the maker tree but I was just curious what the difference was. And it scared me how much of the content comparing the two are sponsored by cricut themselves. What's the point of making a review if you're going to be biased anyways
@ItsyBitsyBuild 4 ай бұрын
I'm so glad you found it useful and I hope you love your new Maker!
@robertcerins 4 ай бұрын
Does Cricut flatten all my b and w images just to make us by the background removing option? Thanks
@ItsyBitsyBuild 4 ай бұрын
The upload type depends on whether you're uploading a jpeg, png or svg. If your black and white image is a jpeg or png, it's always going to be 'flattened' and cricut doesn't control that, it's just how the image is created and so it's necessary to remove the background. You can remove the background without a cricut access subscription by using the magic wand tool or removing it before you upload the image in cricut design space. Whereas svg files don't need the background removed. I hope this makes sense.
@claireparker3605 4 ай бұрын
So cool!! I love your video's.....these guitars are fabulous.
@ItsyBitsyBuild 4 ай бұрын
Thank you so much for the support ☺