Thanks so much! I really appreciate you saying that.

Thanks, dude! This video has been a LOOOOOOONG time coming. So I can truly say that I have had this setup for 6 or 7 years and have never had any issues. If you have any questions or need to bounce ideas off someone, I'm always here...except recently...I've been working a ton hahaha

I’m the worst at replying! My apologies! You’re very welcome! I’m trying to help get a bit of info out on the interwebs. Thanks for watching/commenting💪🏼

I am soooo sorry that it took so long to reply. KZfaq didn’t send me a notification! I can take a look for my receipt and get back to you

Hey Ric! I didn’t have to do any aligning. The headlight assembly can be adjusted and moved around, but that requires undoing a few more screws and bolts. With that said, when the snow melts, I will just double check to make sure my headlight is in a relatively stock position. I just switched out the bulb as it was leaned over on it’s kickstand. I am looking into LED turn signals, but I plan on doing a bit more research before picking anything up. These next questions are good ones, because I have both a bike Jack/stand AND a rolling motorcycle stand. The rolling stand that I purchased was basically the Kimpex motorcycle dolly. I had issues with it from the get go. The portion that is supposed to hold your kickstand…it’s too short, so I ended up resting my kickstand where it wasn’t designed to go (but it works). As a result, I don’t find the dolly incredibly sturdy. While it does allow me to roll my bike right up to the wall, I feel the need to be super cautious and slow when rolling it around. I wish I could remember the exact make/model of dolly, but I can’t seem to find it. I do remember it costing me around $300 Canadian dollars. As for the Jack/lift, I don’t have anything fancy. If you’re Canadian, it’s the MotoMaster motorcycle/ATV Jack. I couple that with a couple ratchet straps and my bike stays quite secure. If you live in the land of the free, I’m sure there are a millions options. You had mentioned the Let’s Roll Lift. That probably a much better choice than my MotoMaster lift. With your choice, you can position it exactly where you need it to be. Mine took a lot of trial and error. In fact, I may get one. As for the Iron Horse Lift, I haven’t ever seen or used one. So I’m no help at all there. P.S. if you decide to go with whatever version of Kimpex stand/dolly that is available near you, try to pick one with a flat base that extends the entire length of the bike…like this Black Widow MC-DOLLY Steel Motorcycle Dolly

Alex Thank you for your quick response. I do like the Let's Roll unit just concerned if it would fit correctly. It wasn't on their fit chart but the C50 and 109 are, the C90 is about 2 inches longer. The older Intruder VL-C 1500 was listed too so I am hoping that the frame length is similar. Underneath the frame looks long enough so it should be okay, it's just where the unit will be located will the bike be balanced when lifted. I will probably order the unit and try it out they do have a 30-day return policy. If I do, I will send you an update. Take care Ric

I’ve got more video topics lined up, I’m just waiting for some parts to show up! Maybe I’ll change up the order and do the wiring video before the LED headlight swap!

Sorry for the late reply! In my experience you DO NOT need a Suzuki specific crush washer. Essentially, it’s just a small oil container…as long as she’s leak free, you’ll ride happy!

Hahaha close!!! I'm on the other side of Edmonton, Fort Sask! I really love my C90t and I wish there was more info out there. I got really tired of having to search for whatever answers I could on websites that were 10+ years old and stumbling my way through it because the newer versions of the bike are different. I know this channel started off as something completely different, then morphed into a kind of "catch all". But I really enjoy talking about bikes and tinkering with them, so that's where this channel is headed now. I'm working on a video about upgrading headlights and one that shows how I created an integrated garage door opener that ONLY works if the key is in and in the on position. But if you want to see a video about anything in particular, just let me know. As for the where I get my parts, I haven't found a reliable source in Canada (although I haven't searched too hard). I have had great luck with suzukipartsmonster.com. I'm not an expert and sometimes I don't know the name of what it is that I need...which is why I really like this site. It gives the rough area of the bike where the part you need would be situated...then it gives and exploded view of EVERYTHING. When I say everything, you can order 1 single nut or washer and they have the parts numbers. If you find yourself struggling to figure anything out, feel free to ask me and i'll try and help find the andswer. Be safe riding out there!!

@@UechiCannon actually I’ve been looking for a video on how to change the air filters and can’t find anything

@@tylerstephen6053 This is my newest video lol kzfaq.info/get/bejne/pamPityQueDLj5s.html

No problem at all!

Got it done this afternoon and the K&N's installed...Thanks Again, I appreciate the Vlog. The left side was a little for difficult with its clamp location not sure why but it's all back together now.

@@ricmiller484 That's great to hear! enjoy the extra little bit of get up and go AND the better sound!!

Hey Ric! First things first, thanks for watching my vlog! Also, big thanks for commenting. Now, down to business! While our bikes are 2 years apart, they look identical (except yours is way cooler because…BOSS). I HAVE changed out my air filters with K&N and I did NOT have to remove the tank. The owner’s manual has useful information, but I found it quite anemic when I came to minute details. That was the original reason for me hunting down a dealership maintenance manual. I will also say that I brought my bike into the dealership to have my work double checked…it was A-OK. If you’re not on a time crunch, I can make a quick video tomorrow showing the steps to replace the filters. As for the wiring, I can certainly make a video on that too!! Truthfully, I didn’t think anyone would actually be interested. Finally, the LEDs for the headlight and signals. I haven’t changed mine out yet, but it is on the short list of things I plan on doing soon. Thanks again! Alex

@@UechiCannon Thanks Alex, I appreciate you reply and will look forward to your Vlogs. Best Regards Ric

I forgot you ask when you changed out the air filters with the K&N did you notice a difference? I certainly did when I added them to my C50T, a bit more power and a little bit more rumble with the pipes.

@@ricmiller484 I did notice a bit more power with the air filter change, I’m not sure if my bike rumbles any louder though. But I think the air filter exchange was worth it, for sure

Thanks, bro! Feel free to use any of the info for your next cinematic masterpiece!

I totally agree. But as we’ve seen time and time again, no heads will roll for this. On one hand you have organized government and on the other, the biggest religious crime syndicate that has ever existed.

I couldn’t have said it any better!

I appreciate it, dude!

dustysquito Man, I really appreciate you sticking around. It's awesome people like you that keep me coming back to vlog more and more.

dustysquito Side note...I'm still watching your stuff! Don't think it goes unnoticed!!

Kchanilla That depends on the kind of work you want to do. There is a very large Oil and Gas industry here and it doesn't seem to be slowing down. It's a beautiful place and really close to the capital city of Alberta, Edmonton...So really there are many jobs. The only issue I have is having the winter. It really puts a damper on motorcycle riding haha

UechiCannon Thanks for your response men, I'm thinking about immigrating with my family to CA, but topics like weather, security, job opportunities, etc. pop out from my mind so every piece of information I receive about it is really valuable for me, thanks for sharing!. On your video when you're showing your motorcycle, that empty land you show and for the small amount of houses, I honestly thought that Ft. Saskathewan was kinda like a ghost town hehe,.,Thanks again for your valuable inputs.

I didn't know that! I don't agree with giving handouts to people. All it does is make them have to rely on that handout. Thanks for watching, Sac96. I think you watch everything I make...I really appreciate it! GRAZIE!

You're wise! Indian status still exists, but I was trying to be polite and differentiate the difference between Indians from India and Indians from Canada. Thanks for watching, I really do appreciate it!

Thanks!! Have a great one yourselves :) STAY WARM! hahaha

Once I get off the night shift, I'll be recording a few more videos...I need to start stockpiling for the winter months haha

You'll get there eventually...and when you do, I'll expect a Hawaii MotoVlog haha

Oh man, it's pretty much the most perfect place ever haha. All I could think of, while cursing around the island, was "This would be perfect on a bike".

It's probably wise to stay out of it. People can get a bit touchy about these sorts of subjects, but I kind of like to start trouble :) I'm not sure if that was a cop or not...I didn't get pulled over, so bonus for that!!

Thank you very much! I also realized that I didn't forget your KZfaq name at all! I appreciate the comments and the view. I'm just like you, I tell myself all the time that it doesn't matter how many views or subscribers...but really it does. Maybe not in the sense that I've gained something, more in the fact that I have shared my passion with someone. I think we all make videos for ourselves, but we all have that secret dream of being a professional KZfaqr! haha I wish I had way more subscribers so that my shoutouts would pack more of a punch. Either way, Brother, this is just the first shoutout...you will not be forgotten in the future :)

Photo radar...sneaky guys! But they are just doing their job, I suppose. I agree! People need to start thinking more about others.

I agree, everyone has the right to believe what they want...but nobody should be evil.

Man, that pisses me off! It's bad enough when they screw over adults...but children too?! Doctor's need to be held accountable for this kind of stuff. Hopefully your daughter is alright and all is well!

First things first...why are you sobbing? Secondly, I will totally give you a shout out...just stay tuned for it! It's been pouring rain for the past week, so I haven't been out riding much.

It would be awesome to get a shout out. I hope your weather improves. I'm repairing a leaky fork seal on my big bike but I still have my Suzuki GS500 to ride so it's all good.

More than likely it was asphalt tar. Because of our crazy weather, we get super crazy potholes...but why fix them when you can just fill them with a temporary fixing agent :P

In the farmbelt, they throw a layer of iol down and then loose gravel on top of that on most of the back roads. It can make things really interesting. Getting comments on videos is like finding presents under the tree on X-mas morning!

I agree! I love comments hahaha. I'm really lucky when it comes to most of my backroads. I moved out here for work and found that a good 90% of my backroads are paved! I don't know who the genius was that thought it was a good idea...but I LOVE IT!

I'm in the process of doing whatever I can do to make sure it doesn't happen to anyone else. Sadly, it totally will.

Multi billion dollar industry, but if everyone educates themselves its a step in the right direction :)

Thank you, kinda sir!

From the bottom of my heart, thanks!