I hoped this would fix mine (as i say with my tv's gut are showing off) but my issue seems to be a all white screen with audio unaffected

COVID patient zero located

@2005yost Is your TV still working, 6 years later? Mine was not turning on at all, even with the bottom cable disconnected. However, after powering with disconnected t-con and the bottom cable, it came back to life. However, it takes 10 seconds to turn on the LCD after pressing the power button. This seems to be a common symptom with these Sonys, which to me indicates something is still off, like a bad cap or a cracked solder joint. It is possible this was the problem with your TV as well, as opposed to the main board. But may be not. Thanks for the vid!

I changed the mainboard, still same results: power light but Mo standby light and NO back lights even when bottom mini plug is pulled

I have exact model and had same scenario when unplug the smallest connector. But which board should I replace? My tv has metal screen cover above the board to find the model. It’s bit tough.

thanks!! My TV just died after 11 years of use. Purchased a new one but I figured I could fix this too!! Thanks for the info!!

So after disassembling the TV, the very small connector, you want us to plug all those color-coded plugs back in and power up the monitor ?

I replaced the board and still have a black screen. BUT, when i disconnect the same bottom left connector, instead of a backlit blue screen I get what seem like a test pattern, Installed this board and still black screen, however, if I disconnect same bottom connector on left side of board now screen runs thru Green Red Blue Red screens and then a horizontal pattern of those three colors bars and a white bar from top to bottom of the the screen and then back to green blue red screens, etc. but no TV menu or sound- no normal function...Any ideas?

Hey do u know how to just restart the tv or no?

What is the connection that you unplugged? As in what does it connect?

Thanks for your video, I could repair my tv equal fault and same solution Thanks a lot

hi hey i still have a black screen on my tv i have replaced both boards and still get nothing please help

First I'd like to say, thanks for the video. I have a question about the plug you pulled out; is it ok to run the tv with that unplugged? Mine works like you said with it unplugged (minus the remote). I might should mention I have a different model than yours and the cheapest I could find mine for was $100.