It looks solid! I wouldn't have guessed that you'd like the Ranger based on your height. I sat in one once and I thought that it felt a little cramped for a bigger guy. Maybe I didn't give it a fair enough chance.
@isaacspoon2 күн бұрын
I have another video talking about the 5 things I love. And the space is actually on that list shockingly haha my dad and me fit in it comfortably when driving back from Montana and it felt comfortable and our shoulders weren’t hitting either
@blakebard37404 күн бұрын
Great video man!
@mike430686 күн бұрын
I like your build. It looks really nice. It provides enough security for your ammo not to be borrowed casually. I'd be concerned about long term storage and it not being air tight.
@miguellogistics98418 күн бұрын
I got into the AR on a dare on 6.5 Grendel, 16". I was reading on a chat, a former Sniper and current LR Instructor loans out his 12" that he can regularly hit 780m, and reported hitting a 900m on his first effort. The 10.5" pistol I built just gave me a 1" group at 100m with a 2MOA Dot. This is wild.
@vergelbansill981124 күн бұрын
When you were tightening the rear shock top bolt, how were u able to stop the rods from Spinning? Did you just hold the Metal Shroud?
@isaacspoon24 күн бұрын
Yea the metal shroud and the chain channel locks
@BIG_STUNNA25 күн бұрын
Will this work for a 2001 Sequoia??
@isaacspoon25 күн бұрын
Yes it will. My unit was an analog system, which is the same as 2001
@wanderfwd26 күн бұрын
Has the knockoff heater valve been doing good so far? Also, do I need to have that clamp tool?
@isaacspoon26 күн бұрын
No issues. I do not own the vehicle any longer however.
@wanderfwd26 күн бұрын
@@isaacspoon thank you, do i really need that clamp tool or will i be fine without one?
@bobparson442426 күн бұрын
It's nice but nah !!
@markmagee8896Ай бұрын
You didn’t mention your specific location, however, I would challenge you that your test is definitely not comprehensive. I monitor engine and under hood temps routinely and upon engine shut down I recorded up to 265° in the engine compartment of an old diesel truck I keep on the road. So the heat flood when it’s 100° outside after an engine shut down is the extreme test that needs to be performed. You should be performing this test in late July and August in Texas.
@isaacspoonАй бұрын
I did mention my location, however I disagree with your view points. Sounds like a great video you should make!
@victorgxd18Ай бұрын
how much can it cost the timing belt change?
@cliffknoebel8528Ай бұрын
Much appreciated video, glad I went coyote 😊
@bucksohio9838Ай бұрын
Anyone know value or information on the Chinese “Security Forces” marked in Chinese factory 416 all numbers matching in great condition. Any help is appreciated
@Bassrvr_Cape_CodАй бұрын
392,000 miles on my 2003
@M.H.VАй бұрын
12.5" barrel , realy? Then so accurate and effective 👍🏻
@NotMeNaNaNaАй бұрын
I asked my mechanic if he has another customer who is selling a car and he said one has a 2006 Sequoia SR5 for $8500 with new engine(has 11k on it), new tires, radiator, starter, battery, and new brakes. I contacted seller and will go look at it tomorrow. Any additional questions I should ask and is this a good price? I still need to find out how many total miles are on odometer, but sounds like most if any issues have been fixed.
@GunsForEveryoneIsaacАй бұрын
badass
@whitewidow9046Ай бұрын
Ok but what about the cleaning rod brace that gets pressed on mid way between the fsb and gb? I measured mine and its about .01" smaller than the entire textured journal section that it goes on. The og barrel even had a stop built into the profile and was a smooth surface. This barrel would require larhing down the entire length of like 4-6" and mess up the textured profile. Did you come up with a way to combat that? I think enlarging the brace would be the best way maybe but it probably will marr the textures as it presses on. Also that heavy modification for the bipod spacer you memtioned, is it too tight? Like do i need to lathe it? Mine didnt come with that so id like to have as much info as i can before i come up with a plan. Thanks.
@isaacspoonАй бұрын
Everything was identical up until the front channel on the arsenal barrel. Reach out to embach armory on instagram with questions. He built one already with one of my sleeves. Tell him I sent you.
@racevedo360Ай бұрын
Can it be adjusted to better focus?
@isaacspoonАй бұрын
Yes it can. It’s very very clear and can be adjusted
@mrbumper5200Ай бұрын
Did u drill through the cabinet to hang the shelf
@isaacspoonАй бұрын
I used stainless self tapping screws through the exterior into 1x1 wood ledges along the inside
@christianzale505Ай бұрын
Awesome I might get one. I’ve been using that same leupold you also have it’s a great scope but I wanna try something different.
@isaacspoonАй бұрын
I have two of these LHT. I love it. I prefer higher magnification in certain situations than 14x.
@-Savage-Ай бұрын
Sweet rig! Mines equally as sick. 🤘😎
@robbiewilliamson357Ай бұрын
hope they still make this. exactly what im looking for. thanks brother.
@biggie_ripperoni7005Ай бұрын
Would you do an update on your Ak-104 condition/round count?
@isaacspoonАй бұрын
I traded it away for another rifle shortly after this
@teddyandreyka9668Ай бұрын
That is one sexy rifle! I am in the process of assembling a top of the line Grendel build as well
@ThebeezkneezReal2 ай бұрын
The wood vice block is awesome!
@victormartiny75992 ай бұрын
Thanx
@iamnitrox2 ай бұрын
Great place for photography
@paranthropusslam10832 ай бұрын
Looks like melted buildings and archways
@iamnitrox2 ай бұрын
Excited to see this thing come to fruition
@yufengwilliamwu34212 ай бұрын
I didn’t see how you had made those shelves and installed them in the cabinet. Would you please kindly explain a bit more about making those shelves and installation? Thanks.
@isaacspoon2 ай бұрын
I screwed 1x2 planks inside the walls with stainless self tapping screws from the exterior
@MrCooper892 ай бұрын
Let's put it this way, if I saw that in a store, I'd cringe with all that tacky shit. No consistency in color and style of parts.
@thomasmogensen12 ай бұрын
Incredible what wind and water will do. Nice footage 👌🏻
@isaacspoon2 ай бұрын
Agreed! Such a cool feature to be around! Thank you for watching!
@Skintback272 ай бұрын
Any idea why this problem would be draining the battery when the vehicle is turned off?
@samuestos69082 ай бұрын
How compact is it if you just separate the upper and the lower and put one over the other?
@jasonallenperry2 ай бұрын
Thanks Brother! I am about to look at a 2003, this info will help tremendously!
@isaacspoon2 ай бұрын
I’m selling mine if you’re interested in one.
@Jgunxl2 ай бұрын
I like mine better fr
@mattwilsey75202 ай бұрын
How do I find you on the files? I’m interested in getting one of your adapters so I can finish my 1976 Molot build. Is there some other way of contacting you to get one? Thanks
@isaacspoon2 ай бұрын
My username is Isaacspoon on files
@ImNotDumbJustRetarded2 ай бұрын
I think i heard God laugh when i asked for Hi-Point to make a Grendel...
@carlmarks61452 ай бұрын
A quick question is the trigger guard metal or polymer material?
@ratagris212 ай бұрын
A shorter chamber generally is louder than a larger one. Two chambers is average and 3 chamber us better formance, but can be very loud as well as having more concussion to the shooter or bystander.
@paranthropusslam10832 ай бұрын
I know that truck that's a ford fucking ranger
@isaacspoon2 ай бұрын
That’s a MF’n FORD RANGERRRRR
@rogerdavis20563 ай бұрын
Ok question? I just picked up a 96' remington sendero stainless 26inch. Fluted barrel in 308 I want to start shooting long range 400+ should I modify it or leave stock? For accuracy purposes.
@isaacspoon3 ай бұрын
It probably shoots fine. I’d test it at 100yds and see what types of group sizes you get with various types of ammo or reloads before you mess with it at all
@4g63mark3 ай бұрын
Great video and definitely makes me want to try 450 bushmaster
@charles175083 ай бұрын
Ill take ko2s everytime before Falken thanks though .
@isaacspoon3 ай бұрын
How many sets of wildpeaks have you had? My guess is zero 😂
@jakesmith-ho4bl3 ай бұрын
Any recommendations on an aftermarket rack and pinion? Oem is on back order 😢
@disasterduck133 ай бұрын
Thanks for the video
@isaacspoon3 ай бұрын
Are you in the market for a sequoia? I saw you posting on some of my other videos. I’m about to list my sequoia for sale. Within a month or two
@disasterduck133 ай бұрын
Thanks for the video
@lexilex013 ай бұрын
Can’t wait to see more!!
@zacharybigger41443 ай бұрын
Fuck off, man, my poverty pony plus leftovers lower, bear creek upper, and vortex razor mashup is absolutely the best 😂😂 Seriously tho, sweet rifle