Best of all I’ve seen on this subject…thanks for the video. Lp
@onFIREouttakesКүн бұрын
Thanks!
@dontbetoomad268412 күн бұрын
I wish there was a way to give us the measurement of the opening and what he made the width of the shelving to be. I know we used a template but if the opening is 30 inches wide I wonder if he made that shelf 29 inches wide or possibly 28 1/2?
@onFIREouttakesКүн бұрын
It’s in the plans linked in the description.
@rockymilner328616 күн бұрын
How do you do a in swing hidden door
@onFIREouttakes15 күн бұрын
I’ve not done one of those yet but the hinges are MUCH easier.
@jamiebennett385723 күн бұрын
Hi, What motors are these? I'm considering a tollycraft 34 for like this so wanting to know about the engines. Cheers.
@onFIREouttakes23 күн бұрын
Chrysler 318’s
@user-fy4om6yv3b28 күн бұрын
Thanks ! You did a great job!
@onFIREouttakes24 күн бұрын
Glad it was helpful!
@coryjorgensen622Ай бұрын
Was doing this myself and wondered if the rollers had to go one way or another, since they looked symmetrical. It seems that they can go on either way?
@onFIREouttakes24 күн бұрын
I think the ones I got work both ways but I don’t remember now.
@v33zy79Ай бұрын
Cool video. You seem stoked. My dad just got this model, upgraded from. 1994 riding mower. Looks nice
@onFIREouttakesАй бұрын
Thanks! I’ve been happy with this mower. Hope your dad is as well.
@casabenavidez7757Ай бұрын
Dude! ANY chance on getting a build/spec video for that table saw set up you have! that looks AWESOME.
@onFIREouttakesАй бұрын
Search around here for the plans I copied: www.lumberjocks.com/threads/table-saw-router-station-for-sawstop-contractor-saw.344045/?post_id=2280575&nested_view=1&sortby=oldest#post-2280575
@patgamble3217Ай бұрын
Next time lower your table .k to number one as low as it goes. It will clean better.
@onFIREouttakesАй бұрын
Thanks!
@samvore2963Ай бұрын
Running like a champ!
@onFIREouttakesАй бұрын
Thanks! Another one still on the road!
@donlemke64392 ай бұрын
Put a HD silver tarp over the roof part. Mine only lasted 2.5 years without the tarp. The tarp should double that.
@onFIREouttakes2 ай бұрын
Great tip! UV eventually killed ours. Will add a tarp to extend the life of the replacement.
@davidbracetty2 ай бұрын
Thanks for the in depth video! Would you still use the same hinge if the bottom floor of the door was concrete basement floor?
@onFIREouttakes2 ай бұрын
Yes, although it would be much harder to drill for that cup to be recessed. I’m not sure how it would work and you’d have to modify the bottom of the cabinet but you much think about mounting that bottom hinge upside down?
@spychiatrist30452 ай бұрын
Amazon's not a good source for the universal kit made by Arnold or MTD or whoever. Literally any big box store has the MTD kit, you got some weird Chinese crap that doesn't line up.
@onFIREouttakes2 ай бұрын
Thanks for the tip!
@spychiatrist30452 ай бұрын
Sure and it appears I might be slightly mistaken in that the kit you got is perfect for a Husqvarna, but anyway for future reference since MTD/Stanley Black & Decker own Craftsman and Arnold, that would be the way to go next time. I just installed mine on my Murray without a struggle. 🙂 Cheers
@swmiller9992 ай бұрын
Thanks for helping your community out.
@onFIREouttakes2 ай бұрын
Thanks!
@703llh13 ай бұрын
Sorry..the music is SO loud..can't understand what you're saying..
@onFIREouttakes2 ай бұрын
Appreciate the feedback. Thanks.
@Mowersofyoutube3 ай бұрын
I recently bought a Cub cadet XT1 LT46 and it been 4 days and it works great it’s big for bigger yards and it works awsome
@onFIREouttakes2 ай бұрын
Nice!
@mgamga94763 ай бұрын
My job just bought one. I am the lawn guy. It runs great.
@onFIREouttakes3 ай бұрын
Good to hear!
@nemanjaradoja56093 ай бұрын
It’s all fun and games until a grass clipping ends up in your 🍺
@onFIREouttakes3 ай бұрын
🍺
@jesusmex31863 ай бұрын
Handsome guy….
@onFIREouttakes3 ай бұрын
👍
@lour584 ай бұрын
What would you charge to this build for someone. I need an idea to pay someone.
@onFIREouttakes4 ай бұрын
That’s a tough one since I’m not in this commercially. I’d think you’re looking at a few thousand for this type of work though.
@tinal85774 ай бұрын
Thank you! I couldn’t find the manual-how simple
@onFIREouttakes4 ай бұрын
Glad I could help!
@railroad90004 ай бұрын
Holding that part with pliers would have been safer!
@onFIREouttakes4 ай бұрын
Yep! Thanks!
@whitehat7654 ай бұрын
Mine came with it. Didn't know what it was..thanks 😊
@onFIREouttakes4 ай бұрын
You’re welcome 😊
@JP.Collections4 ай бұрын
Amazing! Thanks for the video!
@onFIREouttakes4 ай бұрын
Glad you liked it!
@reynaldojavier18244 ай бұрын
Don’t forget to umplug the electric
@onFIREouttakes4 ай бұрын
Yes! For sure!
@user-gn5dx2cn7s4 ай бұрын
FYI Parts are made in China. Shameful.
@onFIREouttakes4 ай бұрын
Let us know if you find a US made version of this hardware and we’ll link it here.
@mikedziak27595 ай бұрын
Very nice build out!
@onFIREouttakes5 ай бұрын
Thanks!
@gdsstudio9745 ай бұрын
Don't add lubricant, grease or lithium white lubricant. It will dry out and gum up from the heat. It will seize the wheel on the shaft. WD 40 will wash it out if you run into that problem.
@onFIREouttakes5 ай бұрын
Good tip. Thank you!!
@derykmacleod49795 ай бұрын
Thanks! Just ordered a pair of the brackets off Amazon...can't wait till the weather gets warmer!
@onFIREouttakes5 ай бұрын
Right on! Enjoy!
@user-df9ep1xz8n5 ай бұрын
Does the Jam need to be the Same Depth of the bookcase?
@onFIREouttakes5 ай бұрын
No. My bookcase is 6in in a typical 2x4 framed jam.
@user-df9ep1xz8n5 ай бұрын
I'm using 1" boards for the jam
@onFIREouttakes5 ай бұрын
Should work if well supported.
@user-df9ep1xz8n5 ай бұрын
I'm using " boards?
@onFIREouttakes5 ай бұрын
👍
@Sanarje3.5 ай бұрын
Im a carpenter I’ve a few questions, Do you have an email to contact you if you don’t mind? I love your work
@onFIREouttakes5 ай бұрын
Sure. Find me at onFIREfamily @ hotmail.com
@kaidenr40595 ай бұрын
thank you!
@onFIREouttakes5 ай бұрын
You're welcome!
@zachzaputil34405 ай бұрын
Do the clamps leave any marks on ur rail ?
@onFIREouttakes5 ай бұрын
No. Not that I have noticed.
@nkybeekeeper33655 ай бұрын
Very helpful! Clever ideas. Thank you
@onFIREouttakes5 ай бұрын
Thanks!
@Remodelaholic6 ай бұрын
Nice work and great video!
@onFIREouttakes6 ай бұрын
Thank you very much!
@barbaraferron79946 ай бұрын
Replaced the belt, pulley and roller wheels and it still makes that noise. Will it do any harm to use the dryer in spite of the noise?
@onFIREouttakes6 ай бұрын
I don’t think so. It may be some other metal rubbing so it would be best to fix it though.
@fattonyd2326 ай бұрын
I have a 6" wide shelf. How do I know how many inches from the frame to install the pivot?
@onFIREouttakes6 ай бұрын
I had to use trial and error but if you bought the plans, use the template hinge position and see if that works first.
@fattonyd2326 ай бұрын
@@onFIREouttakes I don't know anything about plans. I'm just trying to gauge how to set a pivot hinge kzfaq.info/get/bejne/i66Te89inNK1j30.htmlsi=bTI1Kqxfqr2cekFi
@df78386 ай бұрын
I think thus fella has a bit of a love obsession with that top hinge 😂
@onFIREouttakes6 ай бұрын
❤️
@fredrickvoncold7 ай бұрын
I dont know about that thing , things look a lot cheaper made nowadays . The plastic and thin metal on the deck dont look good .It might last along time on a small yard that looks like a golf course.
@onFIREouttakes6 ай бұрын
They just don’t make em like they used to that’s for sure.
@davidritz85347 ай бұрын
Why not mount an electric griddle and plug into an inverter to eliminate the need for propane?
@onFIREouttakes6 ай бұрын
Totally possible. Just a different culinary experience I suppose.
@powrguy16967 ай бұрын
I have the same Moccamaster as yours. GREAT machine, and faster than the Cuisinart it replaced (with a burner). As soon as the coffee's done, I just flip the switch off and didn't care if it was manual, or automatic, when I got it. It takes awhile to dial-in your grind and brew ratio with different beans, but you will settle onto a coffee type that you like best, and then it's "set it; and forget it" for consistently great coffee (unless you become a coffee snob, and get into "pour-over, expresso, exotic coffees, etc.)
@onFIREouttakes6 ай бұрын
Totally!
@joemug40797 ай бұрын
All this smug coffee crap…..is crap. It’s not a science to make good coffee. Good grief.
@georgegreer38437 ай бұрын
Fantastic step by step review on how to do this. Your perfection to detail matches mine. Thank you!
@onFIREouttakes6 ай бұрын
Glad it helped!
@andreasprow50387 ай бұрын
How much smaller should you build your book case than the opening you are installing it into?
@iansullivan95907 ай бұрын
Excellent walkthrough video. Thankyou.
@onFIREouttakes6 ай бұрын
Glad it was helpful!
@onetechyguy18 ай бұрын
Great tutorial! I’m going to be building one in an attic location just like yours. What size smaller did you build the bookcase to fit inside your inside opening dimension so that it will fit without being too tight? 1/8” smaller? Thanks