Really good, thanks, and helpfully including the socket sizes and torques, and the fact that the fill plug is a weird square. So many useless vids on here miss this. God knows why they made it like this (the diff has a 23mm and 24mm - WHY??). NB owners will find a second under tray will need to be removed first - a 10mm socket will be fine for this ;-)
@tomwalter85362 күн бұрын
Hey MiataMods, wanted to say love your videos. Really well thought out and instructional. Used them to change my pads and calipers all round. You were also the one to convince me to get chassis rails. Amazing difference. Cheers mate from Aus.
@R3ddyyg3 күн бұрын
Hello i just did a complete brake job, my rear brakes didn't have that "M clip", my brembo kit came with 2 for each caliper, i've put them on but after a little drive to test a bed the brakes it looks like i lost one and the other 3 came off...
@LocoRocoNL3 күн бұрын
Wiper arm plug, nice one, just used that!
@gregg73635 күн бұрын
Is there any best practice for reinstalling the headlight bowl? Having a tough time getting the headlight lined back up.
@freddylawson52118 күн бұрын
All of mine are fused. I will try the heat and new plastic caps from now on.
@alexandergennaro859610 күн бұрын
Mazda has a reputation of lifter ticking and the way I solved the problem was with synthetic oil , problem solved, have a nice day
@j.acencc627310 күн бұрын
Tensioner is supposed to be in front of the clip... not behind... so... yea
@delpedrob699410 күн бұрын
To cut the foam I used an old long meat cuting knife that I heated up until the metal became blue. It cuted it like butter without making a mess. But protect ur lungs from the fumes
@j.acencc627310 күн бұрын
I can not keep the tensioner s in place. They keep popping out
@posford13 күн бұрын
Very nice channel, thanks . I got with my oem break pads some flat metal things, do I need them ? You don't use them, it's my first pads replacement tnx
@j.acencc627315 күн бұрын
I have my rotors and pads sitting on my shop table... i Halen to have a day off today... and was about to waste my day doing nothing... but this video gave me the motivation to tackle this job. 👍
@alanpettit899316 күн бұрын
great video .thanks for posting
@misterd6120Ай бұрын
FYI, real easy to gain access to the back of the wire harness in order to plug it back in. Just take off the glove box, two screws at the bottom. I had to unplug it at the harness because the red wire came loose and had to solder it back on. The light on the driver side is easy to reach from under the dash so I took that one off too so I could clean it easier. Thanks for the tips on this and some of your other videos.
@vanessav8751Ай бұрын
Thank you for such great videos! I just bought my Miata and it’s been very informative watching your videos! Years later and these videos are still teaching 🎉
@MrZattack101Ай бұрын
good video and good bloopers
@lsk7606Ай бұрын
What size 180° silicone hose would you recommend? I’d like to buy one, and make as little cuts as possible, to use as little connectors as possible. Thanks
@AlfDaggАй бұрын
If you cleaning da overflow revoir you can put rice or sand in it and shake it up it scours the inside debris away but make sure to get it all out. I could not see coolant level before doing this now I can.
@rvne3959Ай бұрын
Thank you for the clear and concise video
@Sigmaruler0199Ай бұрын
since i have an a/c pully as well would anything change?
@AdrianNeedham-jk5bbАй бұрын
Where did you get the new calliper from please? Genuine or aftermarket?
@quackingplatypusАй бұрын
I damaged one of my rear calipers like an idiot by using a C clamp and not knowing about that hidden allen key gear... So now I have to watch this video. It was great, thank you!
@matthew-ph6xoАй бұрын
Hello MiataMods, Can you make a video about fixing the A/C in an NA or converting it to R134a? I would really appreciate it
@supersiem1431Ай бұрын
My caliper doesnt move upwards after following the Steps
@se7eywevy126 күн бұрын
I’m coming across the same thing, what did you end up doing?
@supersiem14315 күн бұрын
@@se7eywevy12 it seems in my case that it was just rusty so i had to hammer it up adnddown because it didn't move freely.
@dlabrieАй бұрын
Great video! I just picked up my first '94 Miata with 36K on it. Oil change if first on the list.
@stijnvantunen5272Ай бұрын
7 jaar later, zelfde probleem, zelfde kleur spiegels besteld🫡😂
@davidbarras5722Ай бұрын
btw if anyone is looking into buying this now they changed the design so that the cable don’t need to be cut anymore
@user-rf1po7vw5t2 ай бұрын
Is this automatic gearbox?
@keithposter5543Күн бұрын
No.
@echowhiskey172 ай бұрын
Tiny garage but I love how organized it is. Tall guys, small Miatas.
@morganlewis26672 ай бұрын
I got good improvement by cleaning switch contacts and putting reflective foil inside the lamp housing but did not change to LEDs. I'm a real cheap ass.
@alunprice85372 ай бұрын
very good thank you
@That_Goofy_Miata_guy2 ай бұрын
How diffrent is it for the 1.8
@noahweronick98962 ай бұрын
Great video! I need to install my frame rails asap
@RonaldRaiden2 ай бұрын
Watching this video gave me rage fits. Why do they have to make stuff so stupid
@RubenMorales-ct9ze2 ай бұрын
Really good video!!! Thanks!
@tyeman30392 ай бұрын
Very hot water works better than a lighter. ✌️
@raymondtroche14002 ай бұрын
Gonna take a crack at it tmrw. Very helpful video!
@itsukicecile34462 ай бұрын
When you said you if you don't have a copper washer nd that you have a whole collection I expected you to share them
@thetruthserum28162 ай бұрын
That looked like a crush washer...
@carlywayss90872 ай бұрын
Do I really have to drain all the coolant or can I just take off the top radiator hose and wing it?
@ableabelstreams23453 ай бұрын
Great video! I’ve done brakes once before and this was a great to refer to. Very informative and the camera angles are great. Thank you.
@tylerdevore65203 ай бұрын
Just did a flush today, with this videos help! Also, the thermostat video was very helpful. I ended up boiling the thermostat just to make sure that wasn't the issue, since mine was overheating. But a thermostat gasket, and a flush later was all I needed. Thanks!
@NealChauhan3 ай бұрын
Hoping this fixes my P0300 misfire error on my 230km ‘97 NA
@AlmirTaranis3 ай бұрын
I had that same model of aluminium caps and got stuck even i putty ceramic pastes onto stems 🤦♂️I had to grind caps with Dremel all the way to the threads. Duckt tape on pillars and 12 mm wrench got them off😂😂😂
@John-pp6xy3 ай бұрын
But the front wheels are up in the air, you aren't going to get all of it out.
@ortaegaclan40163 ай бұрын
Hey man love your videos and how at home friendly they are!! Do you know of any issues with messing with the air fuel ration by adding the filter and the kinks in tubing?
@MiataMods3 ай бұрын
I've had this setup for 7 years now and no problems what so ever so I would say no 😄