Рет қаралды 145,866
In this video I am going to replace my big ugly air box with my own DIY cold air intake and heat shield! I don't think it's much of a performance mod because you will gain only a few horsepower at best but it looks cool and it sounds great so that's good enough for me!
Heat shield / mounting bracket measurements:
» www.miatamods.net/.cm4all/med...
Things you will need:
» Socket wrench
» 10mm socket
» 12mm socket
» Socket extension
» Ice cube tray (optional)
» Flat head screwdriver
» Phillips head screwdriver
» AFM Adapter plate (r.ebay.com/aRdhn3)
» AFM gasket (optional)
» Pod filter (nl.aliexpress.com/item/3inch-...)
» M4 stainless steel bolts and nuts
» Two 76mm 90° silicone hoses (or one 180° silicone hose)
» Two 75mm aluminum connectors
» Four 77-95mm hose clamps
» Heat shield / mounting bracket (parts below)
» Pliers
» M6 stainless steel nuts (optional)
» Sharp knife
» Zip ties (optional)
Heat shield / mounting bracket parts:
» Cardboard, a permanent marker and scissors
» 2mm metal sheet
» Angle grinder with a metal cutting disk
» Vise and a rubber hammer (to bend the metal)
» Drill and a metal drill bit
» Rivets and a Rivet gun
» Sandpaper, de-greaser and high temperature paint
» Oven to bake the paint
Pod filter mounting bracket parts:
» M6 hook bolt
» M6 90° bolt
» M6 bolt connector
Music I used:
» Chuki Beats - Sun ( • 'Sun' Happy Chill Boom... )
» Chuki Beats - Feather ( • (FREE) 'Feather' Real ... )
» Both instrumentals produced by Chuki ( / chukimusic )
Follow me:
» Website: www.MiataMods.net
» KZfaq: / miatamods
» Instagram: / miatamodsnl
» Facebook: / miatamods
» Twitter: / miatamods
» Google+: plus.google.com/+MiataMods
★ If you liked this video please like and subscribe guys! ★