I literally watched this video step by step. I was scared at first, because I had no idea what I was doing. I prayed before cutting the machine back on… it worked perfectly. Excellent video from start to finish !!!
@AnalystQ177610 күн бұрын
What if JUST the drain pump runs continuously???
@budgetprojectsbydavid526310 күн бұрын
Same fix
@AnalystQ177610 күн бұрын
@@budgetprojectsbydavid5263 Thank you sir!! There was another gentleman who also found it was the relay. I will be looking to purchase the ECB and try to plug-and-play replace it and will report back
@budgetprojectsbydavid52639 күн бұрын
Awesome! Please do! Thank you for taking the time to comment!
@jillbaird459411 күн бұрын
I am so glad I found this video! Thank you so much! This worked beautifully.
@chulhochang22 күн бұрын
did you guys end up using the same bushings? mine's not looking great, but neither does yours... does it just look bad but is fully functional?
@budgetprojectsbydavid526322 күн бұрын
No, we used all new OME bushings. Which aection looks bad? Sorry. It’s been a minute since i’ve seen this video. Can you point me to a time?
@chulhochang21 күн бұрын
@@budgetprojectsbydavid5263@17:24, looks like you guys put back on the old top bushing, after saying that you only bought the spring+shocks and the other OE parts you guys didn’t buy/aren’t replacing looks to be still in good shape. Mine looks a little worse than yours, and I’ve been contemplating whether or not to replace that bushing or not. The part that Toyota says is the OEM actually doesn’t look like the old OEM part.
@georgetaylor915423 күн бұрын
this whole video is a vibe
@user-sb9rq8ff3c25 күн бұрын
That stuff looks like saw dust is corrosion from ethanol in fuel it eats dries out rubber to when it crystallized carb is toast
@PatioJ25 күн бұрын
Thank you for sharing this! Lifesaver!
@budgetprojectsbydavid526325 күн бұрын
Make sure to read the other comments. They point out a white disc below the filter that should also be changed periodically. 😃
@rickmadison724126 күн бұрын
Need to put gas adaptive in the fuel to keep it from gumming up..run once a month
@joseberrios114027 күн бұрын
Thank body well done
@ronharle679128 күн бұрын
Thank you so much man this completely fixed it
@NeilChilesАй бұрын
Thanks. Excellent video. I have the same issues described in this video and plan on replacing the IAC this week. Will this clear the double beep warning sound once I’ve completed the repair?
@budgetprojectsbydavid5263Ай бұрын
It did for us. Once you replace it, please come back by and let us know your experience. Thanks!
@atom6922Ай бұрын
I think my relay is good but one of the wires got disconnected somehow is there anywhere I can it’s a red wire and I can’t see to figure out how to depin the starter relay
@alexf1960Ай бұрын
First time did t work but second time I tapped everything and it worked. Thank you so much.
@budgetprojectsbydavid5263Ай бұрын
Glad to help
@REWatchmanАй бұрын
You’re the mvp. When I got halfway through and you said “just tap on it” I was like oh no, what is this happy Gilmore? But it works! Thanks
@budgetprojectsbydavid5263Ай бұрын
Omg! Thanks for the love!
@chrisbrowne4064Ай бұрын
To bad you missed the disc filter.in the bottom of the fuel module.
@budgetprojectsbydavid5263Ай бұрын
Yeah, it’s crazy that my manual never mentioned it. I, too, have amended my procedures to replace the disc filter, but I never went back to amend the video.
@joshsiegelman4198Ай бұрын
Thank you so much, followed this exactly and it worked out great!
@budgetprojectsbydavid5263Ай бұрын
Glad to hear that!
@ianbartelmez4720Ай бұрын
I got one with bad head gaskets, because, your lead in comment...
@budgetprojectsbydavid5263Ай бұрын
Aw, man, i hate to hear that!
@CrucesNomad1Ай бұрын
I own this one and cleaning the carb is now what is wrong.
@rcrawford9588Ай бұрын
What year is your motor?
@budgetprojectsbydavid5263Ай бұрын
Maybe ‘06?
@ElizabethProctor-bi4ywАй бұрын
It worked!
@Louis-lv7wtАй бұрын
nice video. You know guys. Gloves are cheap. and I wont even touch a car without them. Got tired of the scratches, and knuckle busters!
@JaundreLabuschagne2 ай бұрын
A thank you all the way from South Africa👍
@miscovitz2 ай бұрын
It worked!!!!!!!!!! It’s just like everyone said, the blue box with a white label on it. Tapped on it, plugged it back in and viola…the drain motor stopped and I’m washing clothes right now! Saved me a few hundred bucks!!!!!!!! Thank you so much.
@idiggeeks2 ай бұрын
What if the screws won't come out??
@budgetprojectsbydavid52632 ай бұрын
They are hex-headed, right? Maybe use an appropriate nut driver?
@vincentriboni69522 ай бұрын
Life saver!
@lowflyer1452 ай бұрын
What size bolts? 10MM? Thanks for the great video. 👍
@budgetprojectsbydavid52632 ай бұрын
Yes, 10mm with a flexy headed socket.
@lowflyer1452 ай бұрын
Thank you. Sir.
@bassinbillRC53002 ай бұрын
I just plug up the hole with a sharpened number 2 pencil.
@peewee74052 ай бұрын
With the amount of ethanol in gasoline today it makes carbs plug up very easy nowadays. The fuel is mostly the problem now thats why we use addatives and run them regularly. Thanks for the video.
@budgetprojectsbydavid52632 ай бұрын
The stuff i run my car on is roughly 10% ethanol and my small gas engines do not like it at all. I seek out places to buy non-ethanol, which i believe to be 0% ethanol. I don’t have any experience with any amounts between 0% and 10%. Thanks for watching the video!
@treygoldsteinbergeisner68392 ай бұрын
I find that works better with at least 1/2 a glass of wine.
@budgetprojectsbydavid52632 ай бұрын
I’ve had it work the same with as much as a bottle and a half of wine.
@Liz-hb7sb2 ай бұрын
Hello! Love your videos. I hope you check your comments. Can you PLEASE tell me how to get to the pressure sensor ?? I am so frustrated Thank you.
@deathclaw9472 ай бұрын
10/10 Saved my bacon, loved the sense of humour. Item #3 was what I'd been missing!
@AngelaEvans-dd8wm2 ай бұрын
I have a question?! I watched your first video and went through the process as my drain would not stop running just like yours. Since I tapped on the relays, now it will not drain at all. The drain pump will not turn on. Do you think the chances are still the electric panel? Or should I change the pump instead…or also?!
@budgetprojectsbydavid52632 ай бұрын
I would not change the pump. Start with the board. That seems to be everyone’s problem. There have been other posts on this video saying that they changed the pump first, to no avail.
@louissimmons15132 ай бұрын
One of the best vids I've seen. I still have to buy risers based on some pics when our house first was built. I have a landing in between floors. Any suggestions for that?
@budgetprojectsbydavid52632 ай бұрын
The landing might require either some nail down hardwood flooring, with bullnose on the outside edge or maybe some sort of vinyl “fake” hardwood flooring to closely match the chosen stain. I have no advice on risers, as i’ve never had to deal with that. Best of luck with the project and thank you for your kind words!
@BillDavis-zd9rs3 ай бұрын
I appreciate your courage showing us your process un-rehearsed. I was working on a lawnmower with this class of engine and made the same assumption about the primer bulb, so I feel better knowing I'm not the only one. With your help and tips on where to find the carburetor I successfully got the old mower running. THANK YOU!
@budgetprojectsbydavid52633 ай бұрын
THANK YOU for the kind words! Great job!
@steveparker91423 ай бұрын
This was amazing!!!! I had to tap a little harder than I wanted, But it worked!!!!!!
@aravind23693 ай бұрын
It worked ..Thx !
@jocy1943 ай бұрын
Wow I can’t believe this actually worked!! You just saved me from buying a new washer ! Funny thing is i didn’t even open anything up I just tapped it on top and tried it again and it worked.😅
@user-xl5lx2qp5k3 ай бұрын
Worked for me! And found the relay . It’s blue with a white tag (two inches from the “green something” on the left. Tapped it a few times and now my washer works!🎉
@jerryhatrick58603 ай бұрын
Seeing as I dug potatoes at a farm. Last year for twenty bucks and I saved enough. And I can get all these materials for free. It won't cost me a dime. Hhahahaha hah. It'll pay for itself easily from last year but I do want to get one youkon golds I only saved reds. Russets are cheap at restraunt depot and I rarely use those anyway Golds make a great French fry done properly
@budgetprojectsbydavid52633 ай бұрын
Man, I love those Yukon Golds.
@andrewm.41683 ай бұрын
That washer did nothing to extend the bump stop, lol.
@carolbantz77223 ай бұрын
Thanks so much! I have done this twice now and it has worked both times!
@Mike1ch3 ай бұрын
Before testing tub sensors or anything else, I tried this and it worked like a charm. I would have gone straight to the deep dive diag before trying something this simple
@myrleacole34793 ай бұрын
Thank you!!!!! Worked like a charm! ❤
@budgetprojectsbydavid52633 ай бұрын
Glad to hear it! Thank you for commenting! Really helps the channel!
@Californication03093 ай бұрын
How was the ride ? Was it stiff? I have same 5100 but lower setting haven’t change it till I now how stiff will go
@budgetprojectsbydavid52633 ай бұрын
I reached out to Mike, the truck owner, with your question. Here is his response: If I could redo it I would drop it a half inch to take pressure off the ball joints and it would still be level. Could probably even go the one inch setting and half close to level or maybe a half inch of rake. It’s only still at crawling speeds on rough ground. You speed up.. it butters out.
@MELANIEMYERSACUPUNCTURIST3 ай бұрын
I just had a guy come out and charge me $124. Said I had to replace the computer. Then, I found your video. He wanted to charge me over $650s. Said the part alone was around 400. I said no and paid their fee. Why am I always having to fix my own stuff or pay for new. :( I am so glad I found your video. I have the exact washer you have. Pump running continuously with the 1E code. I sure hope I can do this and it works!. You make it look easy! I was gladly going to pay someone to fix my washer but I won't pay as much as he wanted to charge. That is crazy. Now to find the time...
@budgetprojectsbydavid52633 ай бұрын
Glad you found the video in time! The project is not bad at all! Good luck and check back in, if you would, letting us know how much you paid for the board and where from. Thanks and good luck!
@HenryPach-nu3ke3 ай бұрын
This was excellent and I cannot believe it worked!
@carliknable77023 ай бұрын
It worked! Thank you so much for this video!!
@mattgibson92434 ай бұрын
Great video! I have the same motor with a Bravo 3 and I'm having an issue where it drops RPM and then catches when going into forward or reverse. The dealer is telling me it's normal and the computer is controlling it like a shift interrupt switch would on an alpha. Do you happen to have any video of yours going into forward and reverse to see if it's normal?
@budgetprojectsbydavid52634 ай бұрын
Eeeeee, i’m trying to think. I don’t believe i do, but that doesn’t sound like something mine does.
@mgibson4544 ай бұрын
Here is a link to a video of what mine is doing when going into gear. The dealer swears this is normal but I've never had one do this, but mostly have been a Volvo guy. Also not sure why it came from a different account on my PC, so sorry about that! Also thanks for your time! kzfaq.infof-0JnqBha18?feature=shared