8 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@mustang1966bln 9 күн бұрын
GOOD JOB ,, Thanks MIKE BERLIN GERMANY 😃😃🙃🙃🙃😉😉😉😉
@sonny451967 12 күн бұрын
Worked for my 05
@pitolocopirrin5687 24 күн бұрын
Thanks for taking the time to be specific about the process, much appreciated!
@jubitanaantoine896 Ай бұрын
Because 16 is driver side and 17 passenger one
@AddyKane-yu8ts Ай бұрын
OH M FRICKING G YOUR VIDEO WAS THE MOST HELPFUL!!!!! IT WORKED!!!!!! THANK YOU❤❤❤❤❤
@rondeeds5110 Ай бұрын
How did you know it was the driver rear?
@ericalfaro3011 3 ай бұрын
Have the same tools but why is it so hard to change did you have an extra pair of hands?
@petekane2501 3 ай бұрын
Wow what an awful job to replace a door lock.
@user-ev4yg2mu8g 3 ай бұрын
It’s not working for my 06 Nissan Titan
@donbraden8533 4 ай бұрын
Didnt work
@1MobileMechanic-lz4ul 5 ай бұрын
It worked but now the light came back on after about 30 seconds running at idle and now it's flashing. So this might be an easy way to clear it but if there is an issue it will come back and now it's just flashing instead of being solid
@julioalay7004 5 ай бұрын
Thanks your video was very very helpful Keep it up
@mechaniac9194 5 ай бұрын
Thanks. I'm glad to help
@julioalay7004 5 ай бұрын
What year and what model was the one you picked the ignition on the vehicle
@mechaniac9194 5 ай бұрын
I believe it was a 2001 ford expedition. It was at the junkyard so I don’t remember the exact year. This procedure is the same for other fords around the same year
@patricksablan5123 5 ай бұрын
2:33 🎉
@motorhed__4333 5 ай бұрын
Looks like an oil pump failure or possibly worn engine bearings causing a loss in pressure…
@justinhess8048 5 ай бұрын
How did you put it into brake service mode.
@mechaniac9194 5 ай бұрын
For this vehicle, it's not necessary to put in service mode.
@danielpita7175 5 ай бұрын
I have a 2019 hyundai tuscan is this true? Plz let me kno í want to change the break pads but scared im going to mess it up if i dont out it in seevice mode
@m0niker 5 ай бұрын
Couple things for anyone about to tackle this .. 1- The lock guide on my CRV was clipped in towards the bottom. In the video it slides right out, but I had to unhook mine from the bottom then slide it out. 2- The clip is a serious pain. A hook type tool is necessary IMO. I couldn't even see the clip so I just started hooking anything I could grab and I eventually yanked it out. 3- MAKE SURE IT WORKS!! I thought mine was fine, put it all back together, only for it to not work. Turns out my new lock cylinder (from Advanced Auto) was either defective or just a piece of shit, and the rod doesn't lock in properly so it falls right out when you shut the door. I ended up super gluing mine in... I figure I'm at 230k so I hopefully won't have to do this again! Other than that, AWESOME VIDEO, amazingly helpful. Thank you so much!!
@slimndnjim 6 ай бұрын
Can you change bushings without removing hoses?
@mechaniac9194 6 ай бұрын
It’s recommended to remove the hoses. Otherwise you are going to struggle.
@schrodingerscat4737 6 ай бұрын
Owner clearly knew a guy 😮😢
@user-pi2wy9iy6u 6 ай бұрын
wtf
@DriftingDragon74 6 ай бұрын
The government may force all new cars to be electric but this right here is proof that ICE vehicles will be around for the next 100 years with redneck ingenuity like this.🤣
@JayDeePLUS-BEATZ 6 ай бұрын
You need a scan tool that can recalibrate the ABS system after replacing rear pads or its going to thru traction and ABS codee
@mechaniac9194 6 ай бұрын
Didn’t need to. Customer is satisfied and car doesn’t have any abs or brake issues to this day.
@autocorrelation8.1 6 ай бұрын
Una harbor freight 🔧🕶️
@jonathan3982 6 ай бұрын
Thanks for the video. Is this the same assembly as a 2007 2WD extended cab V6?
@mechaniac9194 6 ай бұрын
Should be very similar.
@jonathan3982 6 ай бұрын
@@mechaniac9194 Thank you for replying. I kinda figured it might be, also liked and subscribed 🤟
@mechaniac9194 6 ай бұрын
Thank you I appreciate it 👍@@jonathan3982
@barryblack7384 6 ай бұрын
Its a software issue, not battery.
@Guanacoboi 6 ай бұрын
I did it too and worked just fine, right after i tried to reset airbag light (to no avail) and noticed it was back on. So I did it again and turned off again then came back in the house. Won’t know if it stayed off until tomorrow when i start it back up. Did yours come back on?
@duncanwelton9913 7 ай бұрын
Music reminds me of command and conquer - tiberian sun
@timporter7760 7 ай бұрын
promo sm 🌸
@angelfenixx 7 ай бұрын
Uff wow!!!!! 🙏🙏🙏
@Guanacoboi 6 ай бұрын
I did it too and worked just fine, right after i tried to reset airbag light (to no avail) and noticed it was back on. So I did it again and turned off again then came back in the house. Won’t know if it stayed off until tomorrow when i start it back up. Did yours come back on?
@Challenger57hemi 7 ай бұрын
Be nice if you spoke, that’s much better than subtitles
@Iarecutter 7 ай бұрын
Excellent content! B+
@greggumbs1935 7 ай бұрын
Great video... everything i needed was right in the cmera angle ..nice close ups.. boy it looks like you really bashed your left thumb on some other project...hope its better now!
@mechaniac9194 7 ай бұрын
You’re welcome, glad to help. And yeah caught my thumb in between a rotor and the back bracket doing a brake job on a work van. Nail came off shortly after but my thumb is good now 👍
@greggumbs1935 7 ай бұрын
@@mechaniac9194 OUCH!!! it's something you only need to do once in life to get the message... Anyway regarding the CRV door lock cylinder... It seems like my issue is mechanical... For example...the key will not rotate in the cylinder (driver's side only)...it will rotate in pass side Also wondering if the power lock actuator is bad on the driver's side. Because the power lock button won't operate the driver's side lock either. I tried the easy stuff first with grafite spray n silicone Any experience or tips you might have are appreciated!
@mechaniac9194 5 ай бұрын
Maybe the reason the door lock won’t turn is because the lock cylinder might be for a different key or it’s not assembled right. And for the power door lock it might require a diagnosis, it could be the little motor or an issue in the wiring.
@Yuri-go6pf 7 ай бұрын
Is just oil change? Not something wrong with the engine?
@mechaniac9194 7 ай бұрын
Yes it’s an indicator to get your oil changed or maintenance work.
@AustinThompson15 8 ай бұрын
Worked perfectly 🙌 thanks so much!!!
@armydalton 8 ай бұрын
What were the orange lines for by the link?
@mechaniac9194 8 ай бұрын
The rack & pinion I installed was remanufactured. It already came with them, they're more than likely there as a reference that to the rack & pinion being centered in the middle.
@armydalton 8 ай бұрын
Okay odd question. I am installing a used rack, is there anything I should be aware of before tackling it? Anything specific that needs to be done to the rack for it to work properly?
@armydalton 8 ай бұрын
I saw another video where the guy turned the spindle or whatever its called on the rack 3 full turns and then turn it back in the opposite direction 1 and 5/8 turns
@austinado16 8 ай бұрын
Thanks for all the time you put into the camera angles and shooting this up close, so that it really showed what's needed. I'm about to do this job, so your video is extremely helpful!!
@atiboharris257 8 ай бұрын
Worked perfectly!! 04 titan
@Guanacoboi 6 ай бұрын
I did it too and worked just fine, right after i tried to reset airbag light (to no avail) and noticed it was back on. So I did it again and turned off again then came back in the house. Won’t know if it stayed off until tomorrow when i start it back up. Did yours come back on?
@Guanacoboi 6 ай бұрын
I did it too and worked just fine, right after i tried to reset airbag light (to no avail) and noticed it was back on. So I did it again and turned off again then came back in the house. Won’t know if it stayed off until tomorrow when i start it back up. Did yours come back on?
@Homefreeliving 10 ай бұрын
THANK YOU!
@Guanacoboi 6 ай бұрын
I did it too and worked just fine, right after i tried to reset airbag light (to no avail) and noticed it was back on. So I did it again and turned off again then came back in the house. Won’t know if it stayed off until tomorrow when i start it back up. Did yours come back on?
@mmzale 10 ай бұрын
I have an F20 2012 116i, bought it with an 8.8in screen with lots of scratches. A friend had a spare 6.5in screen. Tried it but shows nothing. Please advise.
@miamoran6218 10 ай бұрын
WORKED PERFECTLY
@Guanacoboi 6 ай бұрын
I did it too and worked just fine, right after i tried to reset airbag light (to no avail) and noticed it was back on. So I did it again and turned off again then came back in the house. Won’t know if it stayed off until tomorrow when i start it back up. Did yours come back on?
@gabrielguild360 10 ай бұрын
Worked great if you follow these steps EXACTLY
@Guanacoboi 6 ай бұрын
I did it too and worked just fine, right after i tried to reset airbag light (to no avail) and noticed it was back on. So I did it again and turned off again then came back in the house. Won’t know if it stayed off until tomorrow when i start it back up. Did yours come back on?
@yasmaniresendez93 10 ай бұрын
Thanks
@augiekawase 11 ай бұрын
Only your method worked on my 08 Titan. Thank you.
@mastertuga288 Жыл бұрын
It work's on my F20. Thank you ❤
@tin101976 Жыл бұрын
Do I need to disconnect the electric parking breaks to turn in the caliper piston? Please let me know thanks
@mechaniac9194 Жыл бұрын
Its not necessary
@josebengochea588 Жыл бұрын
My turn red and then completely black but I could hear the radio I wonder if the temperature outside has to do with it. Cause it turn back on when I turn car off and left it for a couple min.
@douknowwhaot2690 10 ай бұрын
Did it ever fix
@zxcdarel Жыл бұрын
oh you have the car I think its more easy to connect your obd to the car
@mechaniac9194 Жыл бұрын
For this model year, Obd programming isn’t possible with this scanner.
@lakelandcarkeys 8 ай бұрын
@@mechaniac9194 this is too much work, use a different scanner. I do these with autel and autopropad in and out 5 mins, no disassembly. but I do appreciate showing us something different, just not practical
@mechaniac9194 8 ай бұрын
@@lakelandcarkeys You’re absolutely right this job is easier with other scanners. I just made this video to show how to do it with this scanner since there isn’t much information on how to do it. Also I made it to show that’s it possible to do programming that requires eeprom on other vehicles.
@lakelandcarkeys 8 ай бұрын
I have to send my KTP back for repair. it should be back in a few days. once I get it back I will try to make some videos on it as I too have a hard time finding info on its features
@user-zl1vr2ms3n 7 ай бұрын
@@lakelandcarkeyswhat Autel did you use? Today I couldn't do Honda Odyssey 2002 USA with Autel 508. The same issue. Didn't connect by OBD.
@jonnyoviedo3561 Жыл бұрын
Wait so this light is for the oil change??
@mechaniac9194 Жыл бұрын
Yes
@elvisdiaz2718 8 ай бұрын
So this light doesn’t mean there’s something wrong with the engine?
@neilpickford8841 Жыл бұрын
Getting that lock clip out is really difficult, Your video was just what I needed - Thanks
@Bartony08 Жыл бұрын
Very good thanks for the information