How long did it take you to get your saw plate from Blackburn? I've been waiting almost 2 years for mine!
@LiefWezeman2 күн бұрын
I've only seen a couple of your videos, but enough to decide to subscribe! You do some seriously great work. I started my first saw months ago, but made the mistake of leaving a burr on the plate while test fitting the plate into the folded brass back I had. This prevented me from properly setting the plate fully in the back as a result. So I set out to make new backs, which obviously means I still haven't finished! At least the handle turned out well. I also ordered several parts from Isaac at Blackburn Toolworks (unrelated to the saw I mentioned previously) and I am still waiting for my order over 9 months later. How long was your wait?
@rolandkuhn90666 күн бұрын
One of my to do projects. Loved the shaping you incorporated. Nicely made
@PeterMurder7 күн бұрын
I have some mahogany decking with no purpose until now lol
@gray9237 күн бұрын
Great video! Thanks for sharing
@dpmeyer486711 күн бұрын
nice
@tritatuy17 күн бұрын
Потрясающая работа. Очень красиво. Я тоже считаю, что красивым инструментом гораздо приятнее работать. Хочется работать даже просто чтобы испытать это эстетическое и тактильное удовольствие. Поэтому декор на ручке и форма лезвия - прям топ!
@GillisBjork14 күн бұрын
Thank you very much!
@tritatuy17 күн бұрын
Great job and looks aesthetically pleasing
@GillisBjork14 күн бұрын
Many thanks!
@boxcarjimmy467119 күн бұрын
That's a great saw and a wonderful heirloom a tool to be extremely proud of
@boxcarjimmy467119 күн бұрын
Great video and a great saw please keep the videos coming you have talent and it's a pleasure to watch your work in progress
@GillisBjork14 күн бұрын
Thanks, glad you're enjoying them!
@JerrySmith-ih9rd22 күн бұрын
I watched the whole video in one sitting. It was wonderful. I am going to be building a work bench for myself, it will probably be my last as I’m 70 and retired. I will be using some of your ideas and techniques. I am especially encouraged in using mostly non electric hand tools. I have the top which is 100 year old solid hard maple 30” x 72” x 3” which used to be a butchers cutting table. I’m getting a Sjoberg bench vise for the front, and already have my grandfathers tail vise. I would like to make the base out of yellow pine, and will be using your technique of joining it to the top. Thanks for taking the time to make the video.
@GillisBjork14 күн бұрын
Thank you, glad I could give some inspiration for your bench! Good luck with the build!
@user-lj1jo8gr8v29 күн бұрын
Absolutely brilliant. Your use of hand tools is inspirational. Thank you for sharing.
@andyc972Ай бұрын
Nice Trestles Gillis, loving the PPE footwear ! 😉
@andyc972Ай бұрын
A nice bit of repurposing, where did the timber for the top come from, it looked "hard as nails" - well seasoned (old) I guess !
@GillisBjork28 күн бұрын
Thanks, honestly can’t remember anymore I’m afraid! Been a while since this build ;)
@user-cf4gy3ft6sАй бұрын
Great Job!
@cafecybernzАй бұрын
Even though that build was for an artist exhibition, it is still a very good lesson on how to make a useful piece that could adorn anybody's garden. Oh, and nice visual transition at 1:59, you got me there 😀
@GillisBjork28 күн бұрын
Thank you very much!
@andyc972Ай бұрын
Nice no-nonsense clean up and sharpen, that was all they needed, the No4 smoother cuts beautifully now, and Scrub plane seems like a good use for a corrugated plane that may not be your preference for a smoother !
@rossmcleod7983Ай бұрын
Tsa beauty! Just finished the top of my bastardised Moravian today and so shall take a few cues from you for the bottom half. Many thanks.
Ай бұрын
Hi can you please let me know the resin you used? Resin and brand name or maybe if you can share the link for it? Thanks
@GillisBjork28 күн бұрын
It’s called Impresin 90, seems similar to Cactus juice
@scottrelstyle3647Ай бұрын
I cant believe how easy you make it all look. Amazing job, agree with the other comment's about the paint covering up the Joinery, but hey that's commission work....
@GillisBjork28 күн бұрын
Many thanks! Yeah not my preference either, but the joinery is mainly for strength anyway :)
@rollingstone3017Ай бұрын
Looks nice to me. Not chunky. Has a classic park bench appearance.
@GillisBjorkАй бұрын
Thank you, ”classic park bench” was essentially the design brief so I’m happy to hear that!
@oih1969Ай бұрын
Appears simple, yet the joinery that rivals cnc 🙂
@GillisBjorkАй бұрын
Thanks! CNC might have its place in mass production, when you can dial it in and then batch out infinite identical parts, but for one-offs like this, handcut can indeed be just as accurate and much faster :)
@oih1969Ай бұрын
Assume the boxiness is part of the comicbook estetics, but because it's fast to draw it's not necessarily easy to make?
@martinsmith251Ай бұрын
Amazed that your “rough cut to size”, looks way better than my finished product!
@GillisBjorkАй бұрын
Don’t put yourself down! :)
@pettere8429Ай бұрын
Tycker du lyckas bra med ett gömma undan klumpigheten i tvåtumsplankorna. Väl slöjdat!
@GillisBjorkАй бұрын
Stort tack!
@ericgelman2792Ай бұрын
A master class in joinery!
@GillisBjorkАй бұрын
Many thanks!
@jimscheltens2647Ай бұрын
I assume your native language is Swedish, so I’m impressed that your spoken English has no trace of a Swedish accent. Nice work on the bench, I’m always a little disappointed that fine fitting joints get hidden with paint.
@GillisBjorkАй бұрын
Thanks a lot! I agree about the paint in a way, but I also think it feels nice to know that the joints are there, unseen but doing their job :)
@josephpotterf9459Ай бұрын
Thanks Gillis nice work and a good job on your friends art installation
@GillisBjorkАй бұрын
Thank you very much, I'll tell her you said so :)
@MCsCreationsАй бұрын
Beautiful work, dude! Amazing looking bench! 😃 Stay safe there with your family! 🖖😊
@GillisBjorkАй бұрын
Many thanks!
@gymnosophist7471Ай бұрын
You really have the Midas Touch! You can even make construction timber look amazing! 🙂
@GillisBjorkАй бұрын
Thank you very much!
@anthonyseiver7000Ай бұрын
Loved this bench build. You stayed true to hand tools and traditional joinery despite the timber and design. The construction pine looked decent quality too.
@pettere8429Ай бұрын
I am pretty sure that was spruce, most 2by stuff in Sweden is.
@GillisBjorkАй бұрын
Thank you very much! I did spend quite some time looking through the pile at the lumber yard haha!
@danieljohnston4359Ай бұрын
Nice! I guess that some of the choices was not your usual ones - like building furniture with construction grade lumber and the chunky look. But it really fits in the context so mission accomplished :)
@GillisBjorkАй бұрын
Indeed, if I made this for myself it would have looked quite different! Thank you!
@dale1956tiesАй бұрын
Well done. It looked like a fun little project.
@GillisBjorkАй бұрын
Thanks, it was!
@oneeyedphotographerАй бұрын
I saw you forgot to turn end for end (turn the page) as you did it. With refinedments you could also cut notches along the length, maybe make a few cuts further from the edge then use a router to clean it up This looks like the best jig I have seen for ripping long pieces to make narrower onse. I've seen Americans making various campervan/RV beds using "4x2" which looks to me vastly overengineered.
@user-gh3wt2uf2pАй бұрын
VERY interesting tool. I think maybe using a branch or a wood rod curved with heat would be easier to make. Maybe be a curved blade as in the original would be easier to control. Congratulations!. 😊
@charms4242Ай бұрын
I loved your project, do you still have your sketch? I want to build a similar one with my father in law, but I don't know how to sketch, how did you research for yours?
@GillisBjorkАй бұрын
Thanks! I just looked at proportions of historical swords, and took some inspiration from fantasy art for the details. If you plan to use it for training, you'll want to look up where the balance point should be, and make sure the blade is thin and flexible. Good luck!
@charms4242Ай бұрын
@@GillisBjork one last thing, which wood did you use? Sorry to bother you
@GillisBjorkАй бұрын
No worries! The blade and handle scales areoak, the crossguard and pommel is a heavy tropical wood (I suspect ipe but don't know for sure) to help with the balance. If you can't find a superdense tropical, I'd suggest the heaviest hardwood you've got for the pommel, handle scales and crossguard, and then something lighter for the blade. Wood Database is a great site for looking up wood densities.
@randymartin2396Ай бұрын
Push saw
@GnasherismАй бұрын
Hey man, i just found your channel tonight, and it is extremely encouraging. I too myself am a relatively young guy with a real passion for traditional woodworking. I am perhaps a little further behind in my development, only been going for a couple of years, but making some quite good stuff. My question is this, are you able to make a living? I struggle to find the market that cares not just what you make, but how you make it. I understand this isnt really related to this particular video, but where im from in England, I struggle to find anyone that really understands (or cares) what it means to be a craftsman. When almost all machine shops label their stuff as 'handmade', I feel that people lose sense of what that really means. Im determined for it to be work and not just a hobby, but for sure we are needles in a haystack. Anyway, im so pleased to see a woodworker that i can truly relate to, and felt the need to express that. Keep up the brilliant work mate! Matt from UK
@GillisBjorkАй бұрын
Thank you, I'm glad you found my content encouraging! I don't make a living from this, it doesn't even pay for itself, so I totally share your frustration. We just have to keep making stuff, I'm convinced that there are people who care and if we always strive for the highest quality we can, sooner or later I think we'll find our market :)
@LEChti48Ай бұрын
Magnifique travail ! 😃👍
@user-nz2tg6iv1jАй бұрын
پرائس مینشن
@joseluispolobettin4504Ай бұрын
Que sea en español
@user-io9ln1or7c2 ай бұрын
Thank you sir.🎉
@karolskakes3882 ай бұрын
Great job, your saw has that little extra and that shows!
@GillisBjorkАй бұрын
Thank you!
@lukedeaton2 ай бұрын
This is great, I really like how much thought you put into details like gluing up pieces to get straight grain for the middle rail. I'm gradually making my way through all your videos!
@lisandrorubio56922 ай бұрын
Esa es la evanisteria que megusta , con herramientas manualesexelente saludos desde Argentina
@lisandrorubio56922 ай бұрын
Exelent.....!!!!👍👍👍👍👍
@glennthomas41592 ай бұрын
Glad I found this. Your skill is amazing and your interest in old school woodworking is inspiring. I subscribed and will be looking at everything else you put in KZfaq. Thanks for taking the extra time to make videos of your fine work. .
@Carpenters_Canvas2 ай бұрын
I always use a push stroke when using coping saws, I have never used a bow saw yet
@Carpenters_Canvas2 ай бұрын
good job man, I totally agree with not building a bench right away, I haven't really set up my shop yet either. I have been working for about a year to see what I need and where it is best for the space, build it once hopefully . Thaks for tsking the time out to make this
@hectorocasio32882 ай бұрын
i seen this years ago and still come back one of the best woodworkers i know with handtool skills like you have keep it up brother
@pettere84292 ай бұрын
@GillisBjork jag tror quartersawn korresponderar närmare till kvarterssågat där man sågar stocken i fyra 90° sektorer och sedan tar ut brädorna parallellt med sektorns mittlinje. Radialsågat är när man tar ut varje bräda så att årsringarna går nästan rakt genom brädans tjocklek. Mittenbrädan från varje kvart i kvarterssågat blir radialsågad.