What your steering wheel completely locked up before you fixed it ?
@SokhomGarage8 күн бұрын
So, this was not my car, ever drive a car without power steering? That is the case in this video. Steering was not locked, it was hard to steer/turn since its loss power.
@user-rc5hu1ph9e10 күн бұрын
He didn’t had to remove the Brake pedal or whatever he removed . I replaced mine and only took about 10 min .. 🤦🏻♂️
@marcaoferreira448410 күн бұрын
Amazing video! Thank you so much!
@robertbailey768811 күн бұрын
Awesome. You saved me a headache! Nice job.
@jubyloo212 күн бұрын
Hey bro so you didnt have to drain oil on new compressor? What power tool did you use? And why do we need to discharge old compressor? Ty
@SokhomGarage12 күн бұрын
Compressor I bought came pre-filled w/ oil, I used impact wrench/ratchet and some standard ratchet, and you discharge so that it doesn’t blow freon in the atmosphere, it’s dangerous to the ozone and dangerous for us, it could just burst in your face due to the pressure built inside.
@jubyloo211 күн бұрын
Thanks for the great detailed video. It has given me the confidence to try and replace compressor myself. Use the money I saved to buy that Milwaukee power tool 😁
@karlkagulong13 күн бұрын
Anong model impact wrench gamit mo boss?
@Waspytcu14 күн бұрын
Was thinking, pretty sure I can do this….15 minutes into the video and I realize that I’m too self confident . This is Not for the faint of heart.
@antoniamcneil272115 күн бұрын
Hello, in search of an eps for my 2009 tsx. What eps modules are compatible with my make & model? Thank you in advance
@KhafidIbrahim16 күн бұрын
So glad I found your video 👍
@allenfistbotm333616 күн бұрын
Hello, please respond what is that part number because the link is very confusing
@susanstwora347317 күн бұрын
Did u add pag oil to the new compressor? Thank u for the great video!
@SokhomGarage17 күн бұрын
It came prefilled with oil
@oxkaru2019 күн бұрын
Nice video, thanks
@johnholland320720 күн бұрын
So I just did my bottome seat today. I bought my seat from texan on ebay. Lengthy process. Just take your time and don't rush it. It took me between 5-6 hours . The hardest part was figuring out where to start the hog rings. I had to do half up both sides and then the middle. Then I finished the sides and did the front. Not the worst job but I should have waited until it was nice and cool. Good luck!
@johnholland320723 күн бұрын
I will be attempting this in a couple of days. I am sure I can get everything apart. Getting everything back together.... might be a problem! Thanks for the help.
@AniNos5280325 күн бұрын
Did you have your refrigerant evacuated before you did the replacement? My 2008 RDX is having the same problem. I just don't want to spend so much money by bringing it to the shop. I just want to copy what you did so I can save money but I want to get the steps right and not mess up. Thank you in advance.
@SokhomGarage25 күн бұрын
Yes, I took it to a shop to get the Freon evac, after install, I took it back to get charged up
@AniNos5280325 күн бұрын
@@SokhomGarage Thank you so much for the quick response. I appreciate it!
@mikec382026 күн бұрын
going to try the shoe polish method before i go with painting it i think. nice work tho. TY
@mikec382026 күн бұрын
so glad ive seen this video b4 buying one those pricey sticky dash fix gimicks or a even more expensive fabric cover. TY sir!
@raygarcia820227 күн бұрын
Excellent video 👍 Thank you
@dwinellouellette599928 күн бұрын
That’s not a rear door.
@rafrubio195529 күн бұрын
Excellent 👍🏼
@mrwwal409Ай бұрын
Not working feel like I’m going to break it
@TrophyseakerАй бұрын
Thank you soo much guys!!!
@irontrev1640Ай бұрын
Thank you for showing the process, I assume that the passenger cushion had some wrinkles in it I’m assuming that may have to do with the placing of the hog rings but thank you very much. I’ll be doing cushions this afternoon on the same vehicle. Great video thank you
@JKKUHLАй бұрын
WOW THANK YOU!
@dougchan2504Ай бұрын
Thx, good job 👍👍
@GeorgeAssadАй бұрын
What is total cost to do?
@xluv891Ай бұрын
What? Headlights are those
@SokhomGarageАй бұрын
They are original oem sports headlights
@Proto1215Ай бұрын
Nice dude. Never rebuilt a caliper before but you made it easy to follow. Definitely going to rebuild my 93 VR4's calipers soon.
@prop7459Ай бұрын
Great Video
@wantdatcadpat44Ай бұрын
8:34 I hear a subie in the background 👀 lmao my sister got a 2007 RDX Turbo last week and damn it REALLY surprised me 😳
@johnnydejesus2405Ай бұрын
Thank you
@corbinknight9702Ай бұрын
Do you have Hondata with a custom tune? Since your able to activate the BOV while in park/neutral?
@JonhnRíoshernandezАй бұрын
Do you need a turbo to installed
@josephclark2218Ай бұрын
What was the product number and fitment?
@gregnarezАй бұрын
You could have mention the bolt holding the blade is a counter-clockwise bolt
@SokhomGarageАй бұрын
My apologies
@MrSwingboneАй бұрын
I have an 07 rdx and it is doing the exact same thing. Do you have a video for just the clutch/pulley? Or what steps can I skip? Any help is appreciated.
@SokhomGarageАй бұрын
So you can do all the other steps except removing the ac lines, keep that intact and move the compressor up to where you a see the clutch.
@MrSwingboneАй бұрын
Thank you! And thank you for such a quick response!
@brodee258Ай бұрын
How long did it take per seat
@SokhomGarageАй бұрын
25min per seat
@georgigrigoryan4805Ай бұрын
Good job
@christianhall2544Ай бұрын
Wow. Just wow. This was exactly what I was looking for, it was extremely informative, straightforward, and even made it look easy. I just bought myself a new starter, and an impact like yours to do this myself. Thank you. I've subscribed for life.
@atombomb6207Ай бұрын
Keep up the grind man saw you haven’t uploaded inna while and this was the first drop you make great content just watched your coolant bleeding vid for my gs learned a lot of new stuff you should try to get a video out this month but keep up the great work can’t rush greatness 🙌
@SokhomGarageАй бұрын
I appreciate the support, honestly I have some videos, timing belt and caliper rebuild vid that I’ve been working on, but haven’t fully edited all the way yet, due to my busy work schedules, I will try to get these vid out soon.
@atombomb6207Ай бұрын
@@SokhomGarage I feel you man I be so busy with works it’s hard to balance the projects and work plus I couldn’t imagine editing but keep it up bro you make great content 🙏
@ASolangeM2 ай бұрын
The shop I took my car to said I needed to also replace the condenser and accumulator to get the warranty because of metal shavings in the system. I’ve never personally worked on ac systems so I don’t know if that’s right or not. Thoughts?
@SokhomGarage2 ай бұрын
Shops could perform test on your compressor but it’s hard to tell whether metal shaving exists in lines or not, but it’s not uncommon, it really depends on your compressor issue and what symptoms it’s presenting. Technically you’ll have to replace the entire system, which is very costly, but will save you from future problems if done correctly. I believe you need a 2nd opinion on this matter, you don’t have to go to one shop to have it looked at.
@SeaHawk179 күн бұрын
The shop is correct. The manufacturer needs a proof that you replaced those parts at the same time in order to get the warranty for the compressor in case it fails
@TheWinwin4all2 ай бұрын
I wonder if 2023 have the same clips. Im afraid to brake it, as my console doesn't move a bit
@SokhomGarage2 ай бұрын
The interior has been redesigned somewhat for that year.
@AlwaysHopeful872 ай бұрын
Thank you. You just saved me about 3 hours of me being a fool.
@mrhow27122 ай бұрын
I wish someone did a video how to put it in because this motherfucker is driving me crazy
@MrKarpik19822 ай бұрын
Does changing the steering wheel require major modifications for the steering to work?
@SokhomGarage2 ай бұрын
The steering itself? Not really, no mod needed, almost a plug and play, only mod needed is the wiring for horn and cruise control.
@s5loh9742 ай бұрын
will removing the hex throw off timing?
@oranegazakid69052 ай бұрын
Thank a lot for this simple video explaining everything 👍🏾👍🏾
@MMDipset_Dragon2 ай бұрын
I’m doing mine now, thank you
@mercman3109Ай бұрын
Please share from where you buy the seat cover please, will appreciate a link. thanks