To clarify is the screen led or lcd? Bestbuy lists it at led

Nice video. 4K, IPS panel, LED screen (I think), HDR, wow great price.

How is the quality of the recording?

is it normal after importing my .stl file it delimitates some red areas/lines on my pic lithopane and gives the following error "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura" ?

Dude I’ve been struggling badly at this. This was beautiful ty

Can you do this on the series S aswell or just the X?

i orderd the springs and wheels fore the ender -3 v3 se but i dont understand the z ofset thing how o start that on my printer ?

Thanks for the great and informative video. I'm currently having issues recording anything above 30 minutes in 4K HDR. I will try SDR tonight to see if this makes a difference. Currently trying College Football 25, where other games have recorded with no issues. When I stop recording I do not get the notification on screen and the video is on the SD card but corrupted. Sometimes takes forever for some recordings to even show up for OneDrive uploading. Thanks again!

How about laying a sheet of heavy aluminum foil, on a heated glass bed? Will the print adhere to the foil or stick to it?

Exactly what I needed 😁 thanks

I have been very pleased with California Filament PETG colors $23 +/- per 1kg. Also have several matte colors.

Thanks a lot, your profile works very well

I've been dealing with bed leveling for the past few days and using a receipt over printer paper really felt like it improved things and was easier to level. Thank you!

I did everything here and it still won’t let me record for an hour. It’s not an issue with this video, it’s an issue with Xbox. Every day I get closer to buying a PlayStation and tossing that thing in a dumpster. Exclusives are supposedly gonna go to PlayStation anyway

I was using way thicker paper, I can't wait to try this!

I printed for a year and a half then stopped for a year and now I cant get any filament to stick to the bed at all I play with z-offset for hours (every offset number in a range of 30) over and over, I slowed the print down to 30% and nothing. My extruder is pushing but maybe not enough. IDK what to do. Ive also been using reciept paper for a long time

Does it have to be a sad it’s not working for me I did all of this. Before I looked up vids on how to do it 😅

Excellent video thank you. Do you have a video of pulling this recording from a website so you can edit and upload to YT?

Followed these instructions and was able to print my best print ever!! Great vid!!

I get the 4 corners leveled, but the center has way to big a gap. so big the filament just globs on the nozzle

I know I’m super late and you probably won’t respond but I’d really like to look into long time recordings, like not recording recent gameplay but from starting a recording to ending a recording, how far can I max that time. I know yours said one hour but is there any way to make it longer?

CC3D has an amazing Petg, their black is awesome

People say PETG is less of a pain in the butt to print but honestly it's even more of a horror than ABS.

Thank you so much most people who explain what to do don’t give clear and thorough instructions thank you for your dedication and effort. I want you to know you are amazing and keep up the good work you are making a good difference in the world/3d printing community.

Lol it gets so confusing. Watched another video yesterday that claimed it didn't matter what thickness of paper you use, as long as you get the four points the same. Then adjust the Z axis to the right gap. So I'm struggling to understand why using the receipt paper would make any difference

Straight to the point and answered all my questions. Thank you 🙏

Where is the gauge video link?

bad video when I switched it to media i took all my games off my storage

man how you record the main menu screen??

Liked. Subbed.

Thanks! That was super helpful!

Please use less of it. Whatever it is, less please

This fixed the extruder click issue. I was using printer paper and for whatever reason the printer kept trying to level it which caused the extruder to begin clicking

Hi, thank you for this video. I don't see any stringing when I look at the "Landspeeder Kit" at 1:04 on your printer. That's great. Did you share a Cura Profile for it? Thank You

I have used both types of paper but what is the game changer for me is printing a CHEP Bed Leveling Test Print afterwards and fine adjusting according to the thickness of this first layer print. Knowing what a first layer should look like is standard to be reached and I fine tune the knobs according to the outside lines thickness until it looks perfect. If the thickness is equal at each corner then you are good to go. Before I start a large print I always print a CHEP Bed Test Print to ensure I'm just perfect to proceed. Another item that I would like to mention is I highly recommend buying or building a filament dehumidifier and enjoy problem free prints - the difference is night and day.

Thank you. you don’t know how many hours and how many retraction towers and temperature towers I printed and made no progress until now

today was a shit show trying to get my printer to work again . with no success . i thought about using reciept paper but got distracted . thanks for the tips. will comment again if i can get mine working next time i try

10 years ago I read articles that recommended replacing glass bed over heated bed with Aluminum. It was supposed to improve ABS warping as I recall. after 20 min on youtube I'm surprised to find glass seems to be the gold standard now. I bought a 2mm peice of Al back then but never installed beause I have a delta-V printer and cutting a circle would be time consuming. since I'm restoring my printer after 9 years in storage I figure it's time to upgrade but what is best? I don't care if it is difficult to remove print... I just want to optimize temps for ABS.

Been looking for solution like this for a basement stage setup. Can this rig hold multiple stage lights, etc? Thinking of this as a truss.

Great explanation. I haven't used my printer in a few years, and have forgotten everything! It's coming back to me....

How does one do this using Klipper on an Ender 3 Pro?

Feel like a fucking genius loading up this video whilst using a piece of a receipt because I couldn’t find any printer paper

i've been trying to print petg using kingroon kp3s with big flat dimension, i think around 15x12 cm. the first layer seems not always stick correctly, so when the second layer got print, the nozzle will pull the first layer, i've try several ways, but it doesn't help. it only help if I print 1 way only, in top/bottom line directions for for [0, 180], so it will stick one way only, but i want really normal cross printing direction.. maybe need to buy more expensive 3d printer?

This fixed every issue I had been having with my 3d printer! You got my like, subscription, and comment as well! Thank you! ❤

Wow your set up is amazing. Thank you so much for this DIY. Exactly what i was looking for. 10/10

Thanks a million! I love to record my gameplay as killer in Dead by Daylight, but I'm still a little insecure about my skill level, so it feels nerve-wracking to stream live on Twitch. This is the perfect solution.

This is so cool and I can’t wait to try it. What other thing aside from night lights can you make?

Hey was wondering what light source are you using behind the lithophane?

I just did a search for “how to make finer 3D prints” and this came up… Going to try this immediately. I hope it’s still applies in 2024..!