EASY DIY Ceiling Mounted Camera and Lighting Rig / Setup for Studio

EASY DIY Ceiling Mounted Camera and Lighting Rig / Setup for Studio - YouTube Videographer

Рет қаралды 19,903

tr3nD maker

Күн бұрын

Пікірлер: 63

@TG-Maverick22 Ай бұрын

Wow your set up is amazing. Thank you so much for this DIY. Exactly what i was looking for. 10/10

@otter-pro Жыл бұрын

I recommend using zip ties as "safeties" for the lights that hang on the pole, just in case the clamp fails/loosens.

@tr3nDmaker Жыл бұрын

Good tip… thanks!

@pineappleparadox7064 2 жыл бұрын

Fantastic explanation of your setup. Thanks!

@tr3nDmaker 2 жыл бұрын

Thank you. I added the Magic Arms and this setup is so worth the effort.

@KristianPage Жыл бұрын

Great video, exactly what I was looking for.

@tr3nDmaker Жыл бұрын

Thanks.

@MattMendians 5 ай бұрын

This is great! I’m watching videos cause I have a small room with a drum set. Researching ideas to try something like this so I can have a overhead shot and mount my two lights? Also maybe my two overhead microphones to clear up walking space. Great idea!

@andrewrouth249 2 жыл бұрын

Great tips on the paint! I’ll have to try that

@tr3nDmaker 2 жыл бұрын

Be sure to let fully dry before you clamp on it… usually 2 days for clear to get nice and hard.

@lexasakie8107 3 жыл бұрын

Probably the best setup I've seen so far. Thanks!

@tr3nDmaker 3 жыл бұрын

Game change for me... I love the setup. Added a Magic Arm with Camera Mount... and pulling camera off or repositioning is super easy. Thanks.

@lexasakie8107 3 жыл бұрын

@@tr3nDmaker Nice! I'd love to see any more upgrades!

@robertvasi Жыл бұрын

Very good advice! Thank you

@tr3nDmaker Жыл бұрын

Glad you found it helpful.

@themoonbreonchannel Жыл бұрын

Wow this is amazing!! We are definitely going to be creating this!

@tr3nDmaker Жыл бұрын

Thanks for watching!

@3dnatee 2 жыл бұрын

Thank you soo much!!!

@tr3nDmaker 2 жыл бұрын

You are welcome.

@digitalsolutionsZA 2 жыл бұрын

Very nice idea.

@tr3nDmaker 2 жыл бұрын

I added some Magic Arms and now this system is truly amazing as the camera and lighting mounts are rock solid. Also, quick release mount for cameras, so I can pop off camera for B roll. Life Changer!

@SweetChariotOfFire 2 жыл бұрын

Great idea! I've been scrambling to find a new solution for my future office that's a lot smaller than my current one, so this would help in freeing up space. Thanks!

@tr3nDmaker 2 жыл бұрын

This is by far the best upgrade I have done for my studio! By the way... I added the magic arms and not it is even better.

@SweetChariotOfFire 2 жыл бұрын

@@tr3nDmaker which Magic arms did you get? Would you mind linking them? That’s a great upgrade!

@jodifriedman9864 2 ай бұрын

I wish I was handy enough to make this.

@tr3nDmaker 2 ай бұрын

It is not that difficult… thanks for watching.

@rockerslosangeles4184 Жыл бұрын

Nice work buddy.

@tr3nDmaker Жыл бұрын

Thanks 👍

@meganosbornharrell2769 2 жыл бұрын

Amazing! We are totally going to do this! Thank you!!

@tr3nDmaker 2 жыл бұрын

It is so worth the time... made my life sooooo much easier!

@meganosbornharrell2769 2 жыл бұрын

We bought all the stuff, installed it today and WOW. No more tripping over tripods! Thanks again!

@tr3nDmaker 2 жыл бұрын

@@meganosbornharrell2769 So glad it worked out for you. By the way... The Magic Arms are AMAZING!

@Pikmeir 3 жыл бұрын

Great idea putting everything on the ceiling. I've had some bad luck with several of those SmallRig clamps, so I'd recommend something like the Manfrotto 035 Super Clamp instead - much stronger and you won't have to clamp down as hard but they hold better.

@tr3nDmaker 3 жыл бұрын

Agreed. The SmallRIg clamps are working well for my setup, but pushing it.. However, I just bought the IMPACT Friction Clamp, which is exact design of Manfrotto Magic Arm for 1/2 price and a better camera mount so I remove it a nd put it back easily.. Video coming soon.

@RobertGossCreator 2 жыл бұрын

overall nice job I just installed a support pole as well but in my home studio I have a ceiling light so my main power is pluged in so I don't have any wires running down the wall. Saved a lot of money for sure

@tr3nDmaker 2 жыл бұрын

Very cool. It has been the best thing for my office/ studio ever!

@RobinSampsonMcCarthy Жыл бұрын

Thanks. I have a 12-foot ceiling so I'm trying to figure out a wall-to-wall pipe solution.

@lkrulik Ай бұрын

Been looking for solution like this for a basement stage setup. Can this rig hold multiple stage lights, etc? Thinking of this as a truss.

@SwaySkits 2 жыл бұрын

This is the exact same thing I learned when I was in high school studying A/V. I needed a reminder and saw your video. Thank you for making this video.

@tr3nDmaker 2 жыл бұрын

Best project I ever did for my home studio!

@victoriab3704 2 жыл бұрын

What clamp is it you use for your GVM light im trying to mount mine and dk if i should buy a camera wall mount or do this idea.

@wdavis876 Жыл бұрын

Good job. With the GVM mounted lights did you find that you still needed the floor lights? The 2 mounted GVM didn't do the job? I'm asking because I was planning to get 2 GVM lights to mount and do away with the floor stands altogether.

@tr3nDmaker Жыл бұрын

Great question…. You could easily get away with just 2 mounted, if you set them in front of you or off to sides. I use the 2 mount back a bit to light up table or to add color to back wall. 2 cheaper bi color lights on stands forward of me to light up face and anything in hand to show. I was planning another mounted pole for the 2 front lights… just not in my way like the others were.., so, just living with it.

@DutchUltra 2 жыл бұрын

well done man. how tall are your ceilings? mine are 8 Feet. I need to try this!

@tr3nDmaker 2 жыл бұрын

7 1/2 FEET. Absolutely Best Upgrade for my KZfaq Studio EVER! I did add a Magic Arm and Quick Release which take project to NEXT LEVEL!

@kristyzheng4789 3 жыл бұрын

Hi ,if possible do you like to review the teleprompter ?

@tr3nDmaker 3 жыл бұрын

I do plan on reviewing the Andycine A6 Pro... just like to use the product a bit first. I already did un-boxing portion of review with this new ceiling mount setup.

@cheryldeneve1059 2 жыл бұрын

I'm looking for a mounted lighting solution for portrait photography -- I want to light a white backdrop to true white so need to light it separately from the subject. Do you think this setup would work? Have you used this setup for that purpose?

@tr3nDmaker 2 жыл бұрын

I think it will work… the key will be distance from wall and location of subject. I would test holding lights or using stands to test mounting height, distance from wall and subject.

@bigrod246 Жыл бұрын

Can I use anchors if I don’t find stud?

@tr3nDmaker Жыл бұрын

I would definitely try to get a stud… anchors do not have the holding strength needed. With constant adjustments of equipment… they will fail and destroy your equipment or your head! Just adjust your length till you get a stud. You will be much better off.

@VELVET462 10 ай бұрын

I've been looking for a solution like this for my studio for a while now, but the problem for me is that it's the attic. I'm looking for something to mount the rod on the left and right sloping roof..

@tr3nDmaker 10 ай бұрын

In stead of 90 degree fittings on main pipe… could try 45 or 30 if you can find them.

@stochasticagency Жыл бұрын

10 feet of 3/4 inch electrical conduit $10. Two 3/4 inch electrical conduit standoffs. Two 5-inch pieces of PVC. Two 6-inch Black Ecoat Flat-Head Exterior Structural Wood Screws. All are mounted to studs. Total cost $38.56.

@tr3nDmaker Жыл бұрын

PVC??? Please be careful! I used steel pipe, that I could do pull-ups off of… not PVC. Cameras and lighting are heavy and expensive.

@brianblather Жыл бұрын

@@tr3nDmaker Think about the parts list and how they would be used. The 10 feet of 3/4 inch electrical conduit is the cross beam. The Two 5-inch pieces of PVC are spacers between the standoffs and the ceiling. A full 1 inch of the Black Ecoat Flat-Head Exterior Structural Wood Screws has been enough to hold ~250 lbs of lights and cameras on my ceiling for three years.

@tr3nDmaker Жыл бұрын

@@brianblather Sounds like you got it... Just didn't want you to build a PVC ceiling rig that would smash your gear or drop on your head... It's KZfaq... some people should not be building stuff like this. Glad you have a good rig though. Thanks for watching!

@jaavedfilms8172 Жыл бұрын

how did you mount the power supply to that pole.

@tr3nDmaker Жыл бұрын

I designed and now sell a mount to work with these lights and others that mounts to tripod. Because its a flexible material... it clip nicely on the 1" bar for this over-head setup. Email me at tr3ndmaker@gmail.com if you want some prices. Be sure to include: City, State and Country.

@alexdetessieres4246 Жыл бұрын

If your asking about the power strip… just a few zip ties.