i dont remember when i bought my Naga but its been with me for a long time! Just changed the switches and it feels like new! I've had an issue that when i bring it on vacation and its not plugged in it wont work for a while so i guess the traces are not 100% anymore but i hope it will last for many years to come. love it!
@thepthepthepКүн бұрын
12:20 An easier way is to just mount the 7805 onto the heat sink first and then you don't have to worry about measuring how high it is.
@arthurd1591Күн бұрын
@PunkNDisorderlyGamer Thx a lot for this video. I can't find the proper switch for the left and right button. Could you tell me where did you buy it, or what type is it ? Thx :)
@PunkNDisorderlyGamerКүн бұрын
@@arthurd1591 I genuinely don’t remember. Try typing in your mouse’s model number and micro switch it should yield some results. I think razor used Omron brand switches but I could be wrong.
@sammydavis37964 күн бұрын
Hell yea brother love these videos
@pjpleiss5 күн бұрын
Kind of curious. Did nintendo use high temp silver solder on these boards, or the lower temp lead/tin mix?
@PunkNDisorderlyGamer5 күн бұрын
@@pjpleiss not really sure.
@almeidachannel71217 күн бұрын
Nice Video ! Sub & Big Like ! And Love Retro Games !
@PunkNDisorderlyGamer7 күн бұрын
Thank you!
@ChewyChicken5898 күн бұрын
What desoldering gun do you use? I'm trying to find a good one that isn't $300 like the hakko one And one thing to watch out for on those replacement shells, if you have the model with the sound module, you have to make sure to get a case that says it works for the shvc. I guess not all of them accommodate the sound module
@PunkNDisorderlyGamer7 күн бұрын
@@ChewyChicken589 I use the Hakko one, Hakko FR-301. Yeah the cases for the long snes boards and the short snes boards have small differences in the standoffs.
@ChewyChicken5897 күн бұрын
@@PunkNDisorderlyGamer I just broke down and ordered the Hakko.
@ChewyChicken5897 күн бұрын
@@PunkNDisorderlyGamer and yeah, I guess they have different revisions of the replacement shells so you have to make sure it fits the specific model you have. I bought one for an shvc that I have and I just got lucky that I ordered one of the ones that fits it. Although, you can't use one of the screws but it still holds on just fine
@PunkNDisorderlyGamer7 күн бұрын
@@ChewyChicken589 a bit of advice, order more felt filters for it. You WILL need it.
@ChewyChicken5897 күн бұрын
@@PunkNDisorderlyGamer thanks for the heads up
@johnmogavero81568 күн бұрын
I want a Neptune so badly !!!!!
@PunkNDisorderlyGamer7 күн бұрын
@@johnmogavero8156 it think it’s gonna be released in Brazil. I have no idea why, but that’s what I’ve been reading.
@leex1879 күн бұрын
I’m so pleased for you I knew you’d figure it out sometimes persevering pays off.
@Zoogundo9 күн бұрын
Great job and good save!!! 😁
@ProgrammingPeanut9 күн бұрын
The Myth...The Legend
@emerickscott9 күн бұрын
funny, I just bought the same case but in full clear. Worked great. I used the top shell pieces that were in good shape like the parts around the cart, original buttons, and eject lever.
@JohnnyMatherson10 күн бұрын
if you dont need the money atm, keep it and sell it down the line or something
@derrickphillips35410 күн бұрын
I'd say keep it as a trophy as a reminder of the dedication and hard work you've accomplished on this particular console. Or a giveaway would be nice. Keep posting these snes vids. I really enjoy them as I have an affinity to those console.
@mikerobloxpoggers10 күн бұрын
please put for tv in 4:3
@retrogameplus383810 күн бұрын
You could do a giveaway thing!
@bradybrotherton273310 күн бұрын
I have to say is great job with your work and dedication here on youtube!! I like the transparent top and bottom cases on the super Nes too! Yet another amazing video to see! 😊
@inputfunny10 күн бұрын
Great job. If I were you I would probably sell that on eBay. You could probably get at least $200 with the new shell and new capacitors.
@Zoogundo10 күн бұрын
Welcome back!!! I'm so happy you are uploading more great videos!!! 😁
@briansellers767310 күн бұрын
You don't give yourself enough credit. This is great work. You practically rebuilt the entire board. I know this was a challenge for you, but you stuck with it. I don't think I would have the patience or skill to do this.
@DoodMangSpeaks10 күн бұрын
What desolder pump gun is that? Looks like it works really well
@PunkNDisorderlyGamer10 күн бұрын
@@DoodMangSpeaks Hakko FR-301, they may have a newer model now, I’m not really sure. Keep in mind you’re gonna need to clean it quite often, usually takes about 5 mins.
@MaccAttacc10 күн бұрын
Couple questions: 1) What temperature do you set your iron to? 2) You had painted over the traces after using the fibreglass brush. What about the other bare metal parts that were brushed up? At 8:15 you pointed at one part you brushed up. Would that ever rust back up?
@PunkNDisorderlyGamer10 күн бұрын
@@MaccAttacc 1. 300-325 Celsius. 2. I suppose it could rust again but that part of the cart connector was already exposed metal. If rust and corrosion eats a trace, especially under a chip is a bigger problem than if rust sits on a ground plane of a motherboard. The idea is to not allow these consoles to get exposed to moisture or water going forward. It’s pretty common to neglect tech when it’s reaching its phasing out period, but consoles in general tend to have a rebirth cycle where they become collectors items and collectors will hopefully take care of them going into the future. Hope this helps.
@lets_go_me10 күн бұрын
Was a fun video to watch. It is always pretty funny when you spend time swapping and re-flowing chips just for it to be a second cleaning that actually gets you somewhere. I am not a big fan of after market shells, but this looks nice for what it is. I'd sell it if I were you, there is a lot of people paying a lot for these 1 chip consoles and most people watching your stuff are probably already into repairs and things enough to either do that new voultar edge enhancement mod for the 2 chips or already own a 1 chip. If you did give it away, I'd be sure to enter though. I have been watching your channel for years would be cool to have something you worked on.
@BoomerElectronics10 күн бұрын
Nice job sticking with it. I thought that thing was a goner. 😆
@PunkNDisorderlyGamer8 күн бұрын
@@BoomerElectronics I did everything but CPR on this thing. 😂
@waitwhatno10 күн бұрын
Putting the 1Chip in a clear case was a genius move. Being able to see it underneath is really cool
@phantomexe964010 күн бұрын
Man that's a big big win. We'll done and a 1 chip. That she'll perfect.
@TheRVSteam10 күн бұрын
You not knowing what to do with it means you are doing this with passion. I respect that. I started working on SNES boards after watching your content.
@Jerkorip10 күн бұрын
Wow , you are amazing Bro 🎉❤ cheers!!!
@jimdavis683310 күн бұрын
Those shells last pretty good. I've had a smoke gray one on my every day SNES for over 2 years now and it still looks good and is holding up well. PS: those RF shields were from back in the day when a lot of people depended on rabbit ear TV antennas. Video game consoles tended to interfere with them. Besides, nobody uses the RF anymore. PSS: Use Wndex to wipe the shell down next time. It does a better job.
@PunkNDisorderlyGamer10 күн бұрын
@@jimdavis6833 I ordered the other color variants for a few of my snes consoles I have that need repairs. When I get the shells in the mail I will take a look at my boards and see if I can piece something together. If I can I will be giving those consoles away.
@rubenmejia488110 күн бұрын
I would do a give away! Nice work 👏 👌 👍
@PunkNDisorderlyGamer10 күн бұрын
@@rubenmejia4881 this is a good idea. I just have to figure out how to do one properly.
@rubenmejia488110 күн бұрын
It's easy bro, download a spinner and enter the amount of people who comment spin it and what ever number it lands on that's your winner or you can do it by name as well.
@nilsonsouza197710 күн бұрын
Eu deixava o ejequiti e a tampa do cartuchho original, mas não vejo a hora de comprar o meu fume.Esse sugador de solda é excelente.
@PunkNDisorderlyGamer10 күн бұрын
@@nilsonsouza1977 the desoldering gun is Hakko FR-301.
@74bobby10 күн бұрын
Thanks to You and Your Videos I finally worked up the courage and Replaced a snes power port that was Bad.
@PunkNDisorderlyGamer10 күн бұрын
Oh cmon that’s an easy one. Glad you got it fixed 👍
@brucesmith647710 күн бұрын
Glad you are back! Sell that thing and use the money to get some cool items for more content.
@PunkNDisorderlyGamer10 күн бұрын
@@brucesmith6477 I could do that.
@ronaldcarrenobarriga547410 күн бұрын
It's better that you're back ☝️ I always see you helping on reddit, thanks for uploading this valuable stuff, a hug from Chile
@MizuhoChan10 күн бұрын
Wow, I'm impressed you got that working, just because of how bad it looked originally. I've got I think 3 1chips and all three need an APU, plus an APU board too haha.
@PunkNDisorderlyGamer10 күн бұрын
@@MizuhoChan I’ve had 2 1-chips that needed new APU chips in the past.
@MizuhoChan10 күн бұрын
@@PunkNDisorderlyGamer Shame they're so hard to find :(
@jd213_10 күн бұрын
Yeah, I don't think there's any point to the RF shield nowadays, SFCs and most JP consoles didn't have them so it was probably the FCC being overprotective
@jd213_10 күн бұрын
Or I guess the SFC did have an RF shield, it was the FC that didn't
@PunkNDisorderlyGamer10 күн бұрын
@@jd213_ yeah I left it off especially since the console was clear red it helps see the internals.
@wilsvgaddiction445610 күн бұрын
My dude, it's good to see you back in the game.
@PunkNDisorderlyGamer10 күн бұрын
@@wilsvgaddiction4456 what’s up Will I watch your videos when they pop up all the time. Yeah I’m still here.
@user-ig9fr4fb9h11 күн бұрын
I tried putting in new cap kit and reflowed all the chips I'm still getting a DMA fail on the burn in test Donkey Kong plays none of my Zelda's play Bro could you please help me out Bro I have a 93 board it has a PPU 1 and PPU 2 chip hit me I would really appreciate it I need a part's board
@PunkNDisorderlyGamer11 күн бұрын
@@user-ig9fr4fb9h for parts boards try your local game shop or ebay. Keep in mind Super Famicom chips are compatible, super famicoms are also much cheaper. I wish I could give you a chip but these aren’t mine. Sorry
@user-ig9fr4fb9h10 күн бұрын
@@PunkNDisorderlyGamer that's cool thanks for the ideas I tried eBay and the town I live in nobody repairs electronic my uncle use to when there was a Radio Shack Fam Com and SNES are for sale around $150 around here not working 😕 Thank you for everything
@jmac79ers14 күн бұрын
Nice, awesome skills! I wish I could do stuff like that, my hands are so shaky now from age and working as a carpenter/roofer
@derrickphillips35414 күн бұрын
omg i have the same problem. i have a sns-cpu-gpm-02 cpu-b. similar garbage from donkey kong country. the burn in test was also similar. I just need a ppu 1...
@jimdavis683315 күн бұрын
Are you using a magnifying glass or a microscope?
@PunkNDisorderlyGamer15 күн бұрын
@@jimdavis6833 a camcorder zoomed in and naked eye. I do have a microscope I use to check coins, but I don’t like it too much for board repair.
@jimdavis683316 күн бұрын
When you FF through the real work, I fast forward out of here.
@delindarivera167118 күн бұрын
20:51 Fred Richid: Oh Brother! This Guy Stinks!!! 😡
@user-ig9fr4fb9h11 күн бұрын
Your out of your mind my opinion and I'm certified in soldiering he does a perfect Job don't worry about the haters they just wish they had your SNES skills
@PunkNDisorderlyGamer11 күн бұрын
@@user-ig9fr4fb9h lol it’s a joke
@delindarivera167111 күн бұрын
@@PunkNDisorderlyGamer Yeah, I Was Going To Say That My Comment Was A Joke, But Keep Up The Great Work With Those Super Nintendo Boards! I Know You Can Do It!
@PunkNDisorderlyGamer11 күн бұрын
@@delindarivera1671 I pinned it lol.
@JDPeters53818 күн бұрын
Where does the owner get all of these? That's a ton of boards!
@PunkNDisorderlyGamer18 күн бұрын
@@JDPeters538 it’s a game store, when someone comes in with a broken SNES, he offers a quick board replacement as a service. People usually accept it because it’s done the same day, and they leave with a working snes. It comes out much cheaper than buying a new snes, and as a bonus the owner gets a part board that might be repairable.
@leex18718 күн бұрын
I’m glad you tried to save the cpu from the coke bored it’s a shame it didn’t work but you had to try right to be sure
@Serpicoitalia18 күн бұрын
fantastic video 🖖🔝
@joesaiditstrue18 күн бұрын
4:00 that looks like a bad solder connection, have you tried putting pressure on the cpu and/or ppus then turning the console on?
@PunkNDisorderlyGamer18 күн бұрын
I try it sometimes but I never have any success.
@njones62118 күн бұрын
What are the chances of figuring out the issue without the burn in cartridge? Those things are crazy expensive. Is your best bet to just start swapping chips? Really enjoy your videos!
@PunkNDisorderlyGamer18 күн бұрын
@@njones621 it’s possible
@MizuhoChan18 күн бұрын
You could just make one with a cheap game and an eprom. 27C801 I think it is?
@TodoSobresaliente_oficial14 күн бұрын
You can use a everdrive clone and load the rom from a SD. It is around 30$
@MizuhoChan14 күн бұрын
@@TodoSobresaliente_oficial Not much help if it won't boot that before the burn in tests though.
@74bobby18 күн бұрын
Thats alot of CPUs, it would be cool if someone sold aftermarket cpus to replace Bad ones...
@PunkNDisorderlyGamer18 күн бұрын
@@74bobby one day they’re gonna have to
@markianclark964517 күн бұрын
@@PunkNDisorderlyGamer...ok...then an FPGA in the same package will have to be created...the community haven't put any effort in so far...makes me think it's too much challenge... especially when you have boards like Super Players and it's clones..that does exactly the same job for 50 dollars..if those Chinese consoles all disappear from AliExpress then maybe just maybe the community might see a demand...meanwhile I have an original SFC (which surprisingly still works) and a Super Players clone..subnote...the latest clones have a wireless connectivity too..of no interest to me..I prefer wired