This 1-Chip SNES needs a lot of love, it's very dirty and slightly yellowed. Also, it has video issues, lots of upside-down text and vertical lines, Burn In Test fails several tests.
Пікірлер: 128
@jonathanleal2633 Жыл бұрын
Wow, sometimes I forget how good a chill video on youtube can be, thanks dude.
@PunkNDisorderlyGamer Жыл бұрын
Thanks.
@Doommarine233 жыл бұрын
Great video, I appreciate that you kept the audio levels in check and made sure the background music was never too loud. Furthermore, I appreciate how honest you were about your experience, tools, and the effort that took place. I think it helps demonstrate to people that these kind of repairs can be difficult or tricky, and that its okay to struggle with them.
@SuperLuigiGuy643 жыл бұрын
Yay! Another one chip fixed! Thank you so much! 🙌🏼
@wilsvgaddiction44563 жыл бұрын
These types of repairs are what I love to do most. I had to re-cap a 3DO yesterday and it was miserable. Ask me to repair some tiny traces and I'm all in! All I use are the curved tips now. Been doing that for years. Once you get used to it, you'll probably notice how mush the straight tip kind of sucks.
@PunkNDisorderlyGamer3 жыл бұрын
Wil's VG Addiction recapping a 3do eeeew... what’s that like 30 caps?
@RetroSho3 жыл бұрын
Damn man, you've gotten so much better in the last year. Keep up the good work!
@PunkNDisorderlyGamer3 жыл бұрын
Sho thanks, it’s only been about 2 years since I’ve started doing repairs.
@RetroSho3 жыл бұрын
PunkNDisorderlyGamer Yeah I remember! It’s so nice just watching you get better and better at it. Must feel great having that confidence to take on larger projects
@Cutlerup2 жыл бұрын
Great job!! Really enjoy learning new things. This channel deserves more subs
@PunkNDisorderlyGamer2 жыл бұрын
Thanks👍
@twoodall883 жыл бұрын
Nice find/repair. Well done
@bradybrotherton97783 жыл бұрын
Hey man glad to see another video of yours! Love them! 👍💯
@rittol23659 ай бұрын
Thank you for sharing this video, I have similar issues and online it says its inevitable ppu rot, will definitely be trying these methods out
@PunkNDisorderlyGamer9 ай бұрын
Definitely, look for corrosion and broken traces. Sometimes it’s very hard to spot.
@Norrecito3 жыл бұрын
Nice work! The hardest part for me when doing such tiny jumper wires is to make both end of the wire to stick. Usually, when I solder one end of the wire the other one comes off because it heats up very quickly. There is a neat trick to remedy this that I have learned from one of the KZfaq videos: Once you have soldered one end, you could use UV mask ("green paint") to fix it in place :)
@PunkNDisorderlyGamer3 жыл бұрын
I got some UV mask paint coming in I actually might try that.
@ganjaguru8203 жыл бұрын
You're a talented tech my friend! Thanks for sharing these videos and your knowledge. It is greatly appreciated
@PunkNDisorderlyGamer3 жыл бұрын
👍
@MonsieurHonHon3 жыл бұрын
Wow what a crazy fix. What a weird issue also. You could see the tiles were there but the orientation was all broken. Very cool. ]
@PunkNDisorderlyGamer3 жыл бұрын
Monsieur Hon Hon yes the game was running but the image was all broken. That’s usually a hint at what’s wrong with a standard SNES usually it indicates a bad ppu, on a 1-chip it’s usually a broken trace, bad vram, or bad wram.
@fortiogames3 жыл бұрын
Very nice! I’ve never seen snes main boards like this!
@BMR86 Жыл бұрын
awesome repair work man!
@Mona_Lisa1233 жыл бұрын
This is really great. This is the first video I've watched from your channel, and you gained a sub!
@PunkNDisorderlyGamer3 жыл бұрын
It’s only downhill from this video lol
@Mona_Lisa1233 жыл бұрын
@@PunkNDisorderlyGamer I watched several others, and found them all interesting. Your videos are good.
@TorqueEffect3 жыл бұрын
Love these videos. You remind me a lot of the channel "My Mate Vince" but you do exclusively retro game stuff. Keep up the good work!
@PunkNDisorderlyGamer3 жыл бұрын
TorqueEmUp thanks I love that channel
@daveskillcorn52133 жыл бұрын
Nice work man!
@jagojp3 жыл бұрын
Thanks for the great video. I just did a very similar repair of a broken trace from ppu2 to cpu. Those pins are so tiny and hard to connect with. Add the oxidisation on top and its super challenging. Thanks. I've learned so much from your videos.
@PunkNDisorderlyGamer3 жыл бұрын
Nice I’m glad the videos helped you out, the traces are tough at first but with practice it get a bit easier. I should have some videos up since I’m on vacation.
@jagojp3 жыл бұрын
@@PunkNDisorderlyGamer awesome! I really enjoy watching your videos. Are you active on discord? Would be great to have a retro repair discord.
@PunkNDisorderlyGamer3 жыл бұрын
@@jagojp nah unfortunately.
@74bobby3 жыл бұрын
This SNES would look Great on my console Shelf ;). Great Job as always Brother.
@PunkNDisorderlyGamer3 жыл бұрын
Thanks again, it’s truly a wonderful looking console.
@74bobby3 жыл бұрын
@@PunkNDisorderlyGamer Thats for sure. Im Happy that you got it working right again.
@ChrisMX93 жыл бұрын
Great job!
@PunkNDisorderlyGamer3 жыл бұрын
Thanks!
@scottdecker86123 жыл бұрын
Nice job once again.
@danielsantana5403 жыл бұрын
Great vid dude
@Snickerrick3 жыл бұрын
That was tedious, I couldnt do it, my hands are not that steady anymore lol. That was an amazing job repairing and restoring that!
@PunkNDisorderlyGamer3 жыл бұрын
Thanks, I’m proud of this one. I was sent a faulty console figured out the problem and also cleaned it and made it look almost as good as factory.
@Snickerrick3 жыл бұрын
@@PunkNDisorderlyGamer Yea you should be proud, that turned out great! Not many people can do a repair like that, I know I cant.
@Arcade_Mania3 жыл бұрын
hey bro , nice to see you and great video as always 😊, with that small wire you need to use tweezers to get it as close as possible to the soldering point
@PunkNDisorderlyGamer3 жыл бұрын
I’ll try that next time, I feel like I got lucky this time and the wires cooperated.
@michaelthomas18783 жыл бұрын
Great job
@theannoyedmrfloyd39983 жыл бұрын
You should use the thicker solder flux. Louis Rossmann Group has such flux.
@PunkNDisorderlyGamer3 жыл бұрын
Yeah I bought some I have it for future projects.
@lexluthermiester2 жыл бұрын
@PunkNDisorderlyGamer Tip for the future, next time you do soldering work on traces like this, get some green or clear finger-nail enamel and paint over the work to protect it from corrosion or damage.
@1Raphael3 жыл бұрын
Man you always have awesome videos thanks for sharing.. What about a USB light microscope pretty sure you can pick up one of those for like $20 I used to use them with fixing phones always really handy. I don't know just an idea... Tip after you retrobrite those consoles shells you need to condition the plastic with something that UV protects it.....! If you want to know what I've been using for years and it kicks ass.. let me know.?
@PunkNDisorderlyGamer3 жыл бұрын
I could look into that.
@PunkNDisorderlyGamer3 жыл бұрын
Raphael nice I’ll check it out👍
@antibodyarmy3 жыл бұрын
when doing trace repairs remeber to remove the enamel from your wire and tin the wire and trace before doing the repair. also remember a little flux goes a long way, once its on the board its good for quite a few heat cycles. and after the repair clean the board really well, some people will put it into a ultrasonic cleaner because the flux is corrosive over time, you want all the flux gone when you are done soldering.
@Serpicoitalia3 жыл бұрын
why not use green paint to cover scratched pcb tracks? it would be a nice class touch :)
@PunkNDisorderlyGamer3 жыл бұрын
Bruce Wayne I ordered some but it’s coming from overseas and it will take 2-3 weeks to come. I should have looked at the vendor location before I chose to order.
@SparksNZeros3 жыл бұрын
@@PunkNDisorderlyGamer in the mean time you can just use green nail varnish, its basically the same stuff, especially the UV setting kind.
@TorqueEffect3 жыл бұрын
I think the technical term you want for the stuff to use is solder mask.
@thedcexperiment85633 жыл бұрын
Amazing thank you . subscribed. I’m trying to repair a SNES that is showing garbled imagine then it freezes. I’m going to check the connections on the cpu.
@PunkNDisorderlyGamer3 жыл бұрын
Check it out you could have a bad chip
@anlijuhc72322 жыл бұрын
Hello, good that you made a video on how to replace a contact of the game connector of the supernintendo of a chip.
@Meerlu3 жыл бұрын
You solder like old people fuck BUT you're better than me, lol. Keep it up and you'll be strapin' on with Voultar in no time. :)
@PunkNDisorderlyGamer3 жыл бұрын
Haha 👍
@Meerlu3 жыл бұрын
@@PunkNDisorderlyGamer You're actually better at it than old people fucking. LOL. I just love any chance I get to use the phrase. So I probs over use it. Cheers bro.
@ZolotarevAleksandr3 жыл бұрын
привет из России, молодец! Слежу за твоими работами.
@Grant-H2O Жыл бұрын
One thing you might be able to do is find an old 1080p Document Camera from Wolfvision VZ-8Lite4 would be the best choice but if you can find a free or cheap VZ-8Lite3 (its only 720p HD) Go mount the camera head to your armature after taking it off the original base. They zoom in like 10x or something crazy like that so you would get very close. Put it on a big screen via HDMI and viola a professional home made microscope for 40 dollars. I think its a real good idea if I can get one to MOD ill try it myself. Not sure if that would actually be cheaper to BUY new but if you find someone's old crap you might be able to repurpose it into something useful
@CristianLopez-nz1xf3 жыл бұрын
Great video!, how you prevent the rust on chips?
@PunkNDisorderlyGamer3 жыл бұрын
I did order some pcb paint to cover the exposed traces, I’ll be adding that when it shows up. To prevent rust, don’t store the console in a moist environment and don’t expose it to water.
@markbapp78763 жыл бұрын
Great work dude! One question though, where did you get your burn-in cart for the SNES?
Great work dude! What size wire would you reccomend for this repair? I have to do one myself.
@PunkNDisorderlyGamer Жыл бұрын
I think I used 32 or 36 gauge wire, it was very thin.
@VRestoration3 жыл бұрын
excellent video, the super nintendo has always been one of my favorite consoles, without problems it is much better than any current console at least from my point of view. by the way I was left with the doubt, why the control has 2 cables?
@PunkNDisorderlyGamer3 жыл бұрын
Controller 2 cables?
@VRestoration3 жыл бұрын
@@PunkNDisorderlyGamer If at one point in the video it seems that the control had 2 cables but seeing it again I think it is only an optical object of the shadow
@VRestoration3 жыл бұрын
@@PunkNDisorderlyGamer 15:50
@PunkNDisorderlyGamer3 жыл бұрын
@@VRestoration oh haha, that’s the power adapter plug that is going from a socket in front on me to the back of the console.
@mint_kyuu993 жыл бұрын
Seeing this video makes me wanna buy a SNES or SFC for parts and try to repair them! I even had one but I couldn't do anything due to my inexperience. It was a sns-101 model, but it had a dead cpu according to someone who checked it. Even if I had it right now, how could I have fixed it?
@PunkNDisorderlyGamer3 жыл бұрын
MetalMatiaxs X if it’s a cpu you have to find a donor board to salvage one for that. What was the problem you were experiencing? Black screen, No signal, distorted graphics?
@mint_kyuu993 жыл бұрын
@@PunkNDisorderlyGamer I was experiencing a solid black screen, and I didn't had and a donor board, so I couldn't do a cpu swap
@metal-videogamezex1123 жыл бұрын
Nice job bro :D by the way what did use for clean the snes shell?
@PunkNDisorderlyGamer3 жыл бұрын
Metal-Video Gamez Ex soap and water and scrubbing with a toothbrush. I took the top shell apart and scrubbed each piece, then I retrobrited the whole thing. I will be showing the retrobrite setup in a future video.
@metal-videogamezex1123 жыл бұрын
@@PunkNDisorderlyGamer thanks for the tip bro mine is not dirty like the one in the video but i want to keep it clean i love this sistem one of my favorites one of all the time whit the NES,PS1,PS2,Sega Dreamcast :D
@PunkNDisorderlyGamer3 жыл бұрын
Metal-Video Gamez Ex my favorite console to collect and play is the NES and favorite system to work on is SNES.
@SerkTheTurk103 жыл бұрын
Hey man, love your videos. I recently tried a mod to lift pin 3 from a ppu2 which helps with video interference at the cost of disabling composite video. In the process though I accidentally moved the pins surrounding it a bit and now they are misaligned with the traces on the board. Should I just remove the chip altogether or should I try to bend the pins back into place? I can provide pictures if my explanation wasn't clear enough
@PunkNDisorderlyGamer3 жыл бұрын
Try to get them back on without removing the chip. If the legs are loose use a dental pick or something pointy to line it up and then tack the pins in place. I’ve never heard of lifting pin 3 to reduce interference.
@SerkTheTurk103 жыл бұрын
@@PunkNDisorderlyGamer Honestly watching your videos gave me confidence to give it another shot, and after about 30 minutes i got it to work again! Thanks for the help man
@PunkNDisorderlyGamer3 жыл бұрын
@@SerkTheTurk10 I’m so glad 👍 I hope you consider a sub. Did lifting the pin ultimately give you a better image?
@SerkTheTurk103 жыл бұрын
@@PunkNDisorderlyGamer Yes surprisingly it did eliminate the diagonal lines that would show on my RGB-01 SNES. i think only certain models have the issue. huge fan of your channel though, i love the repairing content
@davidmedina50503 жыл бұрын
What is the name of the testing cartridge that shows all the passing or failed tests and where sonic buy one
@edipower20043 жыл бұрын
Friend great work...so i m ask you onde thing, with a haver the Black screen and use the burn in test ...they Will appear the result on the screen?
@PunkNDisorderlyGamer3 жыл бұрын
Sometimes the result of the failure will show up on screen, other times no. Sometimes with bad CPU the burn in test won’t start at all, CPU failures aren’t all the same.
@edipower20043 жыл бұрын
@@PunkNDisorderlyGamer thanks
@blakekonynenbelt8963 жыл бұрын
Where did you get your test cart from and how could I get my hands on one?
@PunkNDisorderlyGamer3 жыл бұрын
Blake Konynenbelt I got mine on Etsy but you can get one here www.ocdreproductions.com/Burn-In_Test_Cart/p1560736_18499139.aspx
@SnakeOps153 жыл бұрын
@@PunkNDisorderlyGamer Thank you I had trouble finding one also
@WhyNotYolo3 жыл бұрын
Hey quick question any idea on how to fix a snes that plays the game cart but the video is upside down?
@davidkastin42403 жыл бұрын
Turn you tv upside down ☺
@bigjplay3 жыл бұрын
I have that exact same board in my SNES, how does the pi connector come out, every video I watch says just to pop it out, but mine won't come out
@PunkNDisorderlyGamer3 жыл бұрын
The last few snes revisions nintendo soldered the cart connector to the board as 1 piece. They aren’t removable unless you desolder it.
@bigjplay3 жыл бұрын
@@PunkNDisorderlyGamer that seems to be my problem then. Thanks so much for the info, saved me from potentially breaking the board lol!
@danielsantana5403 жыл бұрын
I own Street fighter 2 turbo and super street fighter Snes
@debian4life3 жыл бұрын
Wouldnt a trace pen worked also?
@PunkNDisorderlyGamer3 жыл бұрын
I guess maybe it would, haven’t tried.
@sneakyvee3 жыл бұрын
how do I fix a broken capacitor pad that's ripped off?
@PunkNDisorderlyGamer3 жыл бұрын
Sneaky V scratch up the pcb trace attached to the missing pad and try and anchor the capacitor leg to that.
@sneakyvee3 жыл бұрын
@@PunkNDisorderlyGamer thanks a lot :)
@Steveburto3 жыл бұрын
I can't place the music from the last like 3 or 4 vids. It sounds like a square game? You got me stumped, what is it? Secret of Mana? Super Famicom?
@PunkNDisorderlyGamer3 жыл бұрын
I just downloaded a bunch of songs from a relaxing snes music compilation, the songs are from various different games. Off the top of my head idk what song is from what though.
@chrisw80693 жыл бұрын
@@PunkNDisorderlyGamer one was Ogre Battle in the prologue...
@hektorlinko3 жыл бұрын
Great Video Brother Bear! Awesome! You Da Man! You are totally Cobra Kai Material and know how to sweep the leg! A++++++ Thumbs Up! Subscribe! : ))
@becco6503 жыл бұрын
Any chance I can get you to check out my SNES? I'm getting inconsistency graphic issues with some games.
@PunkNDisorderlyGamer3 жыл бұрын
That seems like it could be a faulty ppu or a video ram. Unfortunately, I’m not taking in any repairs at the moment. I’m quite busy with some other projects.
@becco6503 жыл бұрын
@@PunkNDisorderlyGamer if you become available in the future I would love your help to fix my issue. Thank you and keep up the good work!!!!
@mro60693 жыл бұрын
Second
@aaronpierce31993 жыл бұрын
I have a spare SNES board. 1995 model. And a spare 1990 model. Would you be interested in those?
@PunkNDisorderlyGamer3 жыл бұрын
Sure would, shoot me an email at Punkanddisorderlygamer@gmail.com we can work something out.
@aaronpierce31993 жыл бұрын
@@PunkNDisorderlyGamer kk my email is aaronpierce536@yahoo.com
@Serpicoitalia3 жыл бұрын
again first😎👋
@PunkNDisorderlyGamer3 жыл бұрын
Bruce Wayne you didn’t even watch the video yet.🤣
@Serpicoitalia3 жыл бұрын
@@PunkNDisorderlyGamer i'm watching it, but i wanted to write the first comment, i've seen all your videos, you need to do more
@PunkNDisorderlyGamer3 жыл бұрын
Yes, batman.
@Andorianin3 жыл бұрын
4:54 Утюгом не пробовал паять? :)
@_Wander.3 жыл бұрын
punk and disorderly, that a nod to Nofx?
@PunkNDisorderlyGamer3 жыл бұрын
NOFX was my jam growing up, I love punk rock. Nowadays I don’t listen to much NOFX anymore.
@_Wander.3 жыл бұрын
@@PunkNDisorderlyGamer same. wolves in wolves clothing and punk & disorderly were my two first punk albums. that was my top genre growing up. now days i listen to mostly instrumental and classical. that and chip-tunes/ certain Ost's.
@PunkNDisorderlyGamer3 жыл бұрын
@@_Wander. you mean punk in drublic?
@_Wander.3 жыл бұрын
@@PunkNDisorderlyGamer haha yeah idk where my head was at. just waking up.
@Popclone Жыл бұрын
You need gloves when working with fiber brush or that crap will get into your skin and stay there for days. I also recommend disinfecting the consoles before working on them, I'd say a quick Isop wipe for beginning.