Can I parallel a 5kw and an 8kw inverter from the same brand (Deye)?
@unwiredАй бұрын
If using Eastron meter what will happen if the grid went down?
@lnostdal2 ай бұрын
Seems there's a problem with this feature. When the battery SOC is 100%, the PV input Watt will be close to 0 - so smart load never triggers. Setting smart load trigger ON before 100% won't work in all circumstances, because battery SOC can approach 100% in parallell with smart load operation. A deadlock scenario basically. Any workaround for this?
@antoniofrancese25222 ай бұрын
Sono molto interessato a l'acquisto sia del Inverter 10KW che pacco batterie ma vorrei sapere il costo e se è disponibile a Milano.
@javierlaiglesia11192 ай бұрын
Sorry how i turn on the ac circuit breaker of microinverter? I connected everything and i connected to the relay web and i did the quick set. But nothing power coming from the microinverter to the grid.
@alexey_ssl3 ай бұрын
Can work in parallel Hybrid invertor and on-grid Invertor (once without battery)?
@nicolaiprinz86893 ай бұрын
When will those be available please?
@zenonbinkowski72013 ай бұрын
Fajny film, dziękuję.
@Bripromo3 ай бұрын
Hy y 6
@jorgepereira38744 ай бұрын
Hey Kyle, thanks for your videos! I have been some troubles with communication between string inverters and SMD630CT, it doesnt give any error in inverter just assume it is zero if I turn on "Meter" in parameters and doesnt give any information before that. Sometimes it work smoothly others times happens it, you have any tip? thanks you
@PhilippeCJR4 ай бұрын
what does "IT system neutral is not grounded" option do?
@cocobronco25193 ай бұрын
If your grounding system is IT, which PE and N are separated, check this box.
@JM-nc8cu5 ай бұрын
Just a lot of music and no explanations. Can you not speak?👎
@NiteshSharma-bq1zq6 ай бұрын
how can buy
@stoomheier6 ай бұрын
Sir, where can I find more information? Will it help on a 8kW 1 phase inverter with 6 panels in the sun and 6 panels partly shaded. Panel Voc 37,3V and Vmpt 30,5?
@georgenicola67727 ай бұрын
hello, I installed a sun-8K-SG01LP1-US/EU hybrid Deye inverter, on which I mounted a 10kw battery with bms jk, during the day when I disconnect the electrical network it is ok, but at night when the panels no longer I produce and disconnect the network, the battery enters the load after 3 minutes, can it be set to enter the load immediately??? (I mention that in the manual it is written that it can also work with agm, gel battery, i.e. not with a dedicated battery) the inverter detects the battery but on application is not visible, what settings can be made or can be made ???? anticipated thanks for the answer.
@galaxyinearthandsky92068 ай бұрын
Could please send me the complete settings video... I have installed a inverter but when tested load neutral line showing tester glowing, however phase line L) not glowing tester..but voltage showing 230v
@kylezhang83437 ай бұрын
on-grid or off-status?
@nano9968 ай бұрын
Nice job! May I know about the transformer techonology? I Mean; I can not see transformer there, Regards!
@kylezhang83438 ай бұрын
it is on the back of heatsink
@duncannicholson188210 ай бұрын
How can you export data to a PC can you show me please. Thanks
@ivanshoshov811311 ай бұрын
Hello My name is Ivan. I am from Bulgaria. I bought SUN-10K-SG04LP3-EU With serial number 2303026682. After one mistake (turned on with big voltage) we burned the condenzator . We replace it but still. Have the problem to start work properly. Please it is possible to send me the documents on main bord scheme(service documents) not users menu. Please we tray to find a service near to ours contry but we couldn't. I will be very happy if helps me! Create thanks!
@pawelmarkisz878311 ай бұрын
promo sm
@rdkater11 ай бұрын
good convertr i have the 8KW version i only wich the display hade a better contrast is verry poor, anny one a solution?
@thomaskamp936511 ай бұрын
What an Chinatrash
@brabavaca11 ай бұрын
Hello Kyle Zhang. Do you have a business address in China for me to buy the MECD. He is fantastic and I would like to acquire at least one. I need an email or a business website. It's possible? I await your information. Tks Valmont
thank you, how to connect to LAN network not WIFI?
@kylezhang834311 ай бұрын
if so, need to use the datalogger with LAN port
@jdogg1000 Жыл бұрын
Great accent 👌
@bonnetalexandre2085 Жыл бұрын
Hello thank you for the video! Is it necessary to plug the load ports ?
@kylezhang834311 ай бұрын
not mandatory. if grid stable, then you also can connect the all the "load" at the grid side and choose zero export to CT
@djdaud007 Жыл бұрын
hello can you kontakt me !
@PhilippeCJR Жыл бұрын
what does the "ARC fault" option do in the settings of the 3phase Deye 12kw?
@kylezhang834311 ай бұрын
it means the inverter sense there's PV arc occur, then give this code.
@PhilippeCJR Жыл бұрын
how to connect 1 or 2 microinverters, to a 3phase Deye 12kw GENport?
@kylezhang834311 ай бұрын
you can try to connect the first one on the L1 and N of the GEN port. the second one on the L2 and N port of GEN. or you can connect them in series and then connect them at the L1 and N of the GEN port
@mouradmourad7378 Жыл бұрын
Can I display the smart on my phone screen??
@kylezhang834311 ай бұрын
didn't get it
@PhilippeCJR Жыл бұрын
any difference in using the CNHT meter compared to the CT clamps??
@kylezhang834311 ай бұрын
The function is same, but the CHNT meter can show other parameters e.g. reactive power, PF/THD.etc.
@kologodavid4092 Жыл бұрын
Excellent inverter hybride
@THEDIESELCHANNEL Жыл бұрын
Thank you. Very help full video.
@zoxwolf2133 Жыл бұрын
Deye, why your CT pointing toward grid?? In my manual it say pointinig toward inverter to utilize zero export to grid? Please advise Thnx
@PhilippeCJR Жыл бұрын
arrow towards inverter
@jimmyflorrs7146 Жыл бұрын
Hi Kyle, I configured the Deye inverter for off grid setup and connected all my loads directly to the inverter. No export to grid or to home load. But I still have power flowing in the grid. How can I zero out this power to the grid (I have sufficient power from Panel and Battery)?
@palmertshuma2389 Жыл бұрын
Check out the direction of your current transformer (CT)
@aresnv Жыл бұрын
Hello, what are the benefits of an energy meter?
@kylezhang834311 ай бұрын
The meter can show other parameters e.g. reactive power, PF/THD.etc. besides the grid power.
Thanks. Do you have a video to dis-assemble the PCB as well?
@kylezhang834311 ай бұрын
kzfaq.info/get/bejne/rL2krNhys9GVgqs.html
@naeemanwar7924 ай бұрын
Thanks for sharing your experience.
@delmasalice9528 Жыл бұрын
Hello in other videos we see the CT with the arrow which is turned towards the inverter and it says to you towards the network it is contradictory. can you confirm the direction I do not want to resell thank you
@PhilippeCJR Жыл бұрын
arrow towards inverter
@chiconeto123 Жыл бұрын
Hi Kyle. Imagine the following situation: the installer changes the wifi AP password from 12345678 to any other and forgets this new password. Do you know if it is possible to reset wifi AP password to the default password (12345678)?
@kylezhang834311 ай бұрын
yes, it is possiable, it needs a professional APP, please connect [email protected]
@arturosekijima7142 Жыл бұрын
Amazing video! One question: I have a small battery bank. Is there a way of setting it up to use just as a no-break? Not draining from battery unless PV is insufficient and grid is out? I assume it would be Zero export to Load, Load First, grid charge. Am I right? Thanks for the work
@kylezhang834311 ай бұрын
if using very small size battery, it may damage the battery.
@alhassanlb Жыл бұрын
Work without even one word.
@KorayKoymat Жыл бұрын
Hello Kyle. I have a SUN1600G3-EU-230 microinverter connected to router using WIFI and I can monitor the solar production in solarman. My question is: how can I monitor the power consumption of my home? I have been told to use an MECD. Is it also compatible with a smart meter to measure the compsumption of the home?
@kylezhang834311 ай бұрын
if so, need to use the energy meter of solarman and the meter need to be installed at the grid side.
@virgo9691 Жыл бұрын
good day, i have 2pcs deye hybrid inverter connected in parallel can i also connect their smartload ports in parallel???
@kylezhang8343 Жыл бұрын
Hi can
@coolestspott69 Жыл бұрын
hello, is there any way of locking my screen using a password? so that no one can change my settings ?
@kylezhang834311 ай бұрын
there's password to lock the parameters setting. four 9
@tigerhill2893 Жыл бұрын
hi thanks for the detailed video , just got Deye hybrid, its an amazing inverter. I have 200 amp c20 batteries can i do time schedule with these batteries in the system work mode?
@kylezhang8343 Жыл бұрын
HI yes can
@ilimuthabiti93972 жыл бұрын
Je naweza kuto kutiki Grid charge ili kuondoa gharama ya umeme wa Grid kuchaji battery zangu?. Ninachotaka nikuona panakuwa na Grid passthroug to the load.
@dibmatar37072 жыл бұрын
Hello , the smart load its cutting off based the percentage of batteries only , although when the power of panels has decreased less than the power of smart load its stay on, any suggestions
@kylezhang8343 Жыл бұрын
Hi please check whether the "grid on is always on"