I would've never placed those mufflers where they are, but hey, what do I know??
@tlmelec22 күн бұрын
Nice instructional video. Keep up the good work Bill. 😊
@darknessislight3689Ай бұрын
I bought one for my 01 convertible 😊 looks sweet
@darknessislight3689Ай бұрын
I bought one for my 01 convertible 😊 looks sweet
@craigallan7263Ай бұрын
Love it, you’ve got yourself a new subscriber. Great work!!
@mackinghorn19912 ай бұрын
No Voice track only music!!!
@dltorres10623 ай бұрын
Great craftsmanship!
@tlmelec3 ай бұрын
Nice artwork! I do my graphics with vinyl, but this is more appropriate.
@tlmelec3 ай бұрын
Awesome job, looking very cool!
@thomas.vitzak3 ай бұрын
Good start, metal shaping fender. 👍
@zaiphsmith2193 ай бұрын
Man, i was smiling that hole video. You dont miss 🤙 soo good. Be kool to get the camera up close for us viewers to see the details.
@envisionmotorwerks3 ай бұрын
Thanks , I have a new camera coming in for the next video hopefully I can get some better shots
@jerrybigrig94753 ай бұрын
😎👍😎
@jerrybigrig94753 ай бұрын
👍😎👍
@jerrybigrig94753 ай бұрын
👍😎👍
@donnpurington2423 ай бұрын
Do you offer the dxf file?
@envisionmotorwerks3 ай бұрын
Sorry no didn't save any
@zaiphsmith2193 ай бұрын
Mate i have been hanging to see this well worth the wait! That is sooo bloody good and that rib is wild. When you made the rib did you bead roll a strip then cut the exsess off so it was close to the rib and use the weld to blend tank to rib?? Was hard to see in the vid. Looking forward to the next 1
@envisionmotorwerks3 ай бұрын
Yup that's exactly what I did , I used a 1" bead roller on a 3 inch strip then cut out the bead and welded it in , blending it was the hard part
@zaiphsmith2193 ай бұрын
@envisionmotorwerks thats such a great look to it. Cheers for the reply mate cant wait to keep watching this build.
@scottmcintyre55433 ай бұрын
That's some next level fab work. Really looking forward to seeing how this build progresses. New sub.
@envisionmotorwerks3 ай бұрын
Awesome, thank you!
@caseymoore47593 ай бұрын
Check out the c7 carbon version. They make the best carbon zr1 style supposedly. Just got mine and it’s really nice
@zaiphsmith2193 ай бұрын
Just stumbled across your video looks sick cant wait to see you sheet work. From Sunshine Coast Australia 🤙
@envisionmotorwerks3 ай бұрын
Awesome, should be starting on the bodywork within the next couple days
@gnemois3 ай бұрын
Awesome work! Thanks for sharing!
@SchysCraftCo.4 ай бұрын
It’s looking really nice
@envisionmotorwerks4 ай бұрын
Thank you
@vm7225 ай бұрын
Did the GMC trucks come with torsion bars suspension in the front. Hydraulic clutch and the X box frame like the Apache 10 🤔
@envisionmotorwerks5 ай бұрын
Yup , it's essentially the same truck, only difference was the motor
@airgunningyup5 ай бұрын
well done , been through about 10 of the cheapo stools in my little machine shop . The frame bends, the caster wheels start to split over time. One lasted 18 months , that was a record. Always thought about building one that would last longer than i do.
@richsharp15246 ай бұрын
Very cool. Nice video
@camilodiniz1346 ай бұрын
Edita o vídeo mais lento amigo tá muito rápido pra gente entende o q vc está fazendo
@silentmarine49936 ай бұрын
100% badass!
@Shadow6a6 ай бұрын
Awesome
@jaimegarcia90326 ай бұрын
Nice Nice you should of made the casters too .❤
@SchysCraftCo.6 ай бұрын
Very nice work bill. Hopefully you will get great use out of it. Can’t wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Fab on. Weld On. Keep Making. God bless.
@Edpalomares547 ай бұрын
Are you still happy with it now?
@envisionmotorwerks7 ай бұрын
I sold the car a few months back , but up until then it held up fine and looked good just not very dimensionally accurate
@Edpalomares547 ай бұрын
@@envisionmotorwerks I’m kind of in between on this one, I’ve done many carbon upgrades, not sure if I want to do the spoiler, mostly because I’m old and might screw it up. Yours did look good but just knowing the measurements were off would bug the crap out of me. If I do decide what strength of the install tape did you use. Thanks again.
@envisionmotorwerks7 ай бұрын
@Edpalomares54 I just used regular 3m tape and it was extremely solid
@richardsanborn79638 ай бұрын
with 0 dust too! mud mud from hell though put a tarp down to catch all the sand so water will drain out scoop it up throw it away after it dries in the sun i use it for fill but what ever
@duanejohnson40438 ай бұрын
hey buddy how is the everlast plasme cutter holding up thinking about getting one?
@envisionmotorwerks8 ай бұрын
Works fantastic havent had a single problem well worth the money
@zackhenry11519 ай бұрын
Hi Does the plasma cutting torch comes with the table ? What kinda plasma cutter is it? Thanks and Thats some 👍 job
@envisionmotorwerks9 ай бұрын
No the plasma cutter dosent come with it , I have a Everlast 82i it runs about 1200 bucks , but if you don't plan on cutting anything thick you can go with a smaller amp plasma cutter
@ericksanchez6837 Жыл бұрын
How will you paint in between the legs?
@envisionmotorwerks Жыл бұрын
Didn't paint it I just waxed the steel so it don't rust
@mxdadNZ Жыл бұрын
I’m surprised your wear a mask for welding 😮
@LeftForDeadGarage Жыл бұрын
Looks pretty good
@envisionmotorwerks Жыл бұрын
Thanks, I like how it turned out
@SchysCraftCo. Жыл бұрын
Keep up the great craftsmanship and hard work my friend. It’s amazing. Keep making. God bless.
@SchysCraftCo. Жыл бұрын
Beautiful
@bigblock54 Жыл бұрын
Fits the build perfectly!
@redpilljesus Жыл бұрын
Good job, tree
@user-ke3ld5cc3q Жыл бұрын
I'd go ahead and put a starter on that thang
@bigblock54 Жыл бұрын
That 3/4 ton axle looks stout!
@envisionmotorwerks Жыл бұрын
The goal is to still use it as a truck so I want everything as stout as possible
@SchysCraftCo. Жыл бұрын
It's coming along nicely so far. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep making. God bless.
@AlessioSangalli Жыл бұрын
Wonderful work. Your own voice can be heard on the left channel only??
@envisionmotorwerks Жыл бұрын
Thanks man , my mic has been acting up , time to upgrade
@AlessioSangalli Жыл бұрын
@@envisionmotorwerks maybe it's just the connector. Odd that the microphone is stereo, maybe it's a setting in the editing software?
@AlessioSangalli Жыл бұрын
@@envisionmotorwerks which welders do you use? I only have TIG and sometimes I am thinking about "cheating" and get MIG :)
@envisionmotorwerks Жыл бұрын
I have a miller diversion 165 tig , a old lincoln 355 tig and a old hobart handler 150 , most everything on this truck will be done with the mig , now if it wasn't a ratrod I would probably Tig weld it but for this it's fine and much quicker
@AlessioSangalli Жыл бұрын
@@envisionmotorwerks I see. I repaired my off-road rig's frame (Toyota FJ Cruiser) that I use to overland with the family with TIG because I don't have MIG. I wonder if the higher heat input I gave to the welds made it actually any better than a MIG weld. So far it seems to hold fine :)
@810Metalworks Жыл бұрын
Awesome video! I love the distressed look you gave it
@SchysCraftCo. Жыл бұрын
Awesome project. Hopefully you get great use out of it for many years to come my friend. Keep up the great craftsmanship and hard work my friend. Fab on. Weld on. Keep making. God bless.
@larryhill5258 Жыл бұрын
Much better! Thank-you! I understand what you are Saying , very interesting! Keep up the good work !!
@fb99q9 Жыл бұрын
What front end did you use?
@envisionmotorwerks Жыл бұрын
It's from a mid 80s C20 1986 I think
@SchysCraftCo. Жыл бұрын
It's coming along nicely so far. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God Bless.
@timothymaldonado-zl1gd Жыл бұрын
I have a 1961 I will start this year your video sure is a lot of help. Thank you
@envisionmotorwerks Жыл бұрын
No problem, the video doesn't show all the cursing from rusted bolts 😂😆