Or watch so you can see how the unit goes together👍🏻
@2StallGarage2 күн бұрын
Looks good to us.
@atouchofhutchad2 күн бұрын
@@2StallGarage thank you!
@madman4320005 күн бұрын
is that a drywall texture gun you're using to paint with? I see now that is the colored bedliner.
@madman4320005 күн бұрын
Should have cut the mastic around the full pump access in the rear. Now with the bedliner on top it will be much harder to remove that cover plate if you have fuel pump replacement.
@atouchofhutchad5 күн бұрын
Let’s hope it doesn’t come to that lol
@madman4320005 күн бұрын
I got JBA arms for mine, not sure they are still made though.
@atouchofhutchad5 күн бұрын
I think they still are made for this Jeep! I’m excited to get them soon. Hope you like yours!
@madman4320005 күн бұрын
@@atouchofhutchad had them since 2016 and no issues. Did require an alignment.
@madman4320006 күн бұрын
I just rebuilt the rear diff on my 2002 Liberty. Different style yoke on that one. is that the D30 rear diff?
@atouchofhutchad5 күн бұрын
Sorry I’m not sure what rear differential it is, I just grabbed one from the local junkyard off the same year Liberty
@williammunozlacruz339716 күн бұрын
Dios mio, invertir tanto tiempo y dinero para destruir una camioneta. hubiese sido mejor lanzarla por un barranco y ahorrarian tiempo y dinero.
@atouchofhutchad16 күн бұрын
@@williammunozlacruz3397 🤣🤣🤣 thanks for watching! Gracias por ver!
@ChristianMendezS19 күн бұрын
Hi, where did you bought the lift kit?
@atouchofhutchad19 күн бұрын
www.roughcountry.com/product/jeep-suspension-lift-kit-68731?C&C%7Cm%7C%7Cname_first_68731-a&gad_source=1&gbraid=0AAAAAD83JzpSajkuEVW7r_seS6nMqrz8-&gclid=Cj0KCQjwwO20BhCJARIsAAnTIVTMfgnvdwX_MhtxAU8trEq4yeRuBxvNWPL1J91mkGZe3F4-EeIW5dwaAshNEALw_wcB I’m having a hard time finding the original kit I purchased but this is basically it just for newer models. There should be other brands that make them as well. Hope that helps!
@MrNewffАй бұрын
I just did the same with my 2010 Liberty. The only thing I didn't replace in the front was the tie rods.
@atouchofhutchadАй бұрын
@@MrNewff I bet it looks nice! It’s a lot of work.
@Bruces-GarageАй бұрын
Looks great!
@atouchofhutchadАй бұрын
@@Bruces-Garage thanks Bruce!
@chrisblock-mg7ddАй бұрын
Also how did you get that side trim off to paint it black?
@atouchofhutchadАй бұрын
It’s all double sided tape and body clips except for the bumpers
@devandebie55Ай бұрын
Do you plan on doing any aquapel or anything on the windows? just so that they’re hydrophobic too
@atouchofhutchadАй бұрын
I have Gyeon quickview on all the glass and use Gyeon Glass+ as maintenance. I could make a video on those if you’d like!
@DetailedbyDonАй бұрын
Looks great, and I *could* see the difference in the water behavior before and after the contact wash.
@atouchofhutchadАй бұрын
Thank you! I love seeing that water behavior before and after a wash.
@diydetailofficialАй бұрын
Thanks for the update
@atouchofhutchadАй бұрын
Thank you too!
@diydetailofficialАй бұрын
Introducing DIY Tuber for small content creators! kzfaq.info/get/bejne/fqike6mp172qeJs.html
@atouchofhutchadАй бұрын
@@diydetailofficial applied today!
@gothops154Ай бұрын
I just got mine and what you’re saying makes sense until I get to the outlet side. The collared part of your y-valve it attached to the filter output, and it has no close valve. So when you’re running the bypass, what’s making the water follow into your pressure washer instead of being pushed into the filter outlet hole? I mean I’m watching you use it so I guess it works, but something here is off to me. I’m not a plumber nor do I fully understand the internals of the y-valve, but it seems like your bypass would be pushing water into both the other opened valve as well as into the “collared” valve that is attached into the outlet of the filter. Maybe once you have already used the filter, and it’s now full of water, and the inlet valve is closed, when the water goes all the way thru the bypass and reaches the y-valve on the other side, the collared valve is “plugged” bc the filter is full of water which has no place to escape so the water is forced to go to the other open valve which leads to the pressure washer
@atouchofhutchadАй бұрын
I see exactly what you mean and I honestly can’t tell you the mechanics of it. I guess as the water goes into the inlet side and when you have your Y-splitter set to filter or not it will just force it into the pressure washer. Mine works well and I hope yours does too!
@ajesusmoralesc.Ай бұрын
Me lo pueden mandar a Mexico
@gothops1542 ай бұрын
Is it worth to pay $75 for this accessory rather than make on your own? Do you just need the y splitter, extra bypass hose material, two connectors to connect bypass to Y splitters? Do you also need some additional adaptor to then connect the y hose into/out from the filter?
@atouchofhutchad2 ай бұрын
It was worth it for me to pay the extra to get something I knew would work because I’m not sure of my ability to put one together lol but by all means- if you have the ability to build one, I’d say go for it!
@christopherbowman22662 ай бұрын
Where did you get your attachments for your pressure washer
@atouchofhutchad2 ай бұрын
The gun I purchased from Amazon, I would recommend getting something better like MTM or active. The foam cannon is MJJC and the hose is an Uberflex 50ft
@diydetailofficial2 ай бұрын
Thanks for the video!
@atouchofhutchad2 ай бұрын
Thank you too!
@gric1112 ай бұрын
1 ounce is a lil high on the mix ratio for foam cannon isn't it? Thought it called for like 19ml or so
@atouchofhutchad2 ай бұрын
Instructions say anywhere from 13-30 depending on application method. I didn’t think 1 oz was too much for 1000 ml and I’ve had good results as you can see
@andrewjae74322 ай бұрын
I’ve been looking for a video like this. Can’t wait to watch your content bro
@atouchofhutchad2 ай бұрын
Dude thanks so much!
@robe213 ай бұрын
I just got Mine and the bypass is a great idea, I’m going to do that. I was thinking making everything quick connect but the bypass is even better imo. However, the reason they recommend a new hose is so old mineral build up doesn’t end up contaminating your fresh clean water. That’s the only issue that still exists with your setup. Even though you bought a new hose you are running both clean and unclean water through it depending on if the bypass is on or off. That would leave the risk of contamination in the hose getting in your clean water when you don’t the water through the spotless, after you just ran water with minerals in it through the same hose during your rinse. Maybe you’ve already thought of this or there’s another comment. I would use a dedicated clean water hose and a dedicate “rinse” hose if I were you. Or just run all the water through the spotless.
@atouchofhutchad3 ай бұрын
Appreciate the great tips! For me, the TDS meter is so handy to have to know I have clean water coming through my pressure washer, even though your suggestion of a rinse hose is a great idea too!
@marquistoliver85713 ай бұрын
i need to do this to my 05 TL. i detail it every week but i need to shampoo it and clay treat the paint
@atouchofhutchad3 ай бұрын
You can do it!💪🏻
@alchemistcarcare3 ай бұрын
You’re awesome, man.
@atouchofhutchad3 ай бұрын
Right back at ya!
@atouchofhutchad3 ай бұрын
🙏🏻🙏🏻 appreciate you my man!
@IamDetailedAF3 ай бұрын
First... Let's go bro!!!
@Manandharvlogs3 ай бұрын
Location
@victor580103 ай бұрын
Why don't you write a script for your voice-over,instead of stumbling along ?
@atouchofhutchad3 ай бұрын
🤣 keeps it organic! Thanks for watching!
@Cor333y3 ай бұрын
Hey Hutch! Just wanted to say thanks for your videos. I am getting ready to clean up my old 05 Liberty and you are helping me a lot! Great job on what you’ve done to your Liberty! 🗽
@atouchofhutchad3 ай бұрын
Dude, thank you so much! I appreciate the kind words and so glad my vids are helping you. I hope your project goes well, keep us updated!
@davidanthony8623 ай бұрын
I just came across this video. I own a Liberty and have always liked the idea of spraying bed liner on all the black plastic on the exterior. Is this for sound isolation?
@atouchofhutchad3 ай бұрын
That was part of it but not the main reason. It was a good idea to cover the rust and it just so happens that my dad had all the tools, equipment and knowledge to do it. I also don’t plan on being gentle with this Jeep so it was for that too lol
@chrisblock-mg7ddАй бұрын
What pressure did you set your compressor at when spraying?
@atouchofhutchadАй бұрын
@@chrisblock-mg7dd I can’t remember but I’m sure each bed liner manufacturer will have their recommended psi
@effertz87244 ай бұрын
🌟 'Promosm'
@Jtapia0314 ай бұрын
There’s no way that bypass cost $75. You can literally piece it together yourself at Home Depot or even Harbor Freight for $38-40. Thanks for the video bro! Will be using your method when I purchase this next week
@jamesfrank5054 ай бұрын
A great video until you decided to skip over the actual installation of the new rocker panels -- my neighbour did it is not very instructional
@atouchofhutchad4 ай бұрын
Sorry man. Hard to take a camera everywhere and work around everyone’s schedule. I’m sure there are plenty of KZfaq videos you can find that do much better job at documenting this and being more instructional then I ever could. Thanks for watching my video!
@Nonamestranger1264 ай бұрын
You can use a fluid transfer pump and pump out the old diff fluid from the fill plug
@atouchofhutchad4 ай бұрын
Great tip! Thanks!
@BXGreen4 ай бұрын
Nice review! What was the tire cleaner diluted at? Think u said 1:1 maybe half the water? Maybe mixing it stronger for a one hitter? Or try it straight next time. Just curious. Thank you.
@atouchofhutchad4 ай бұрын
Thank you so much! Glad you enjoyed it! I diluted about 1:2 for maintenance/light cleaning. They say dilute 1:1 in a pump sprayer or for hammered wheels go at them straight. Hope that helps.
@rsxfreak794 ай бұрын
Great review! Looking forward to seeing future videos.
@atouchofhutchad4 ай бұрын
Thank you! More to come!
@bishoprain92874 ай бұрын
What product and ratio did you use on the door jams, and what snow foam product and ratio, looks interesting...
@atouchofhutchad4 ай бұрын
I used super clean I think 10:1 both in pump sprayer and foam cannon for the pre wash. I needed something aggressive for the algae. Then I used a ph neutral soap for the hand wash.
@Ecdetails4 ай бұрын
Great video my dude - it came out nice about to film mine and see where it stands with it all
@atouchofhutchad4 ай бұрын
Thank you so much bro. Can’t wait to check your video out when it’s done and see what you think.
@Ecdetails4 ай бұрын
My guy
@atouchofhutchad4 ай бұрын
My man!!
@alchemistcarcare4 ай бұрын
We aren’t crying, but there is some water dripping from our eyes. Sending you a Brimstone label for your IK
@atouchofhutchad4 ай бұрын
Thank you so much! And glad you enjoyed the video!
Great video man, glad you liked it! In regards to the foaming aspect, PILOT is designed to not leave any residues, this means it won’t foam unless activated. To get it to foam you need to use a more product, and shake the bottle to activate the surfactants, and do this before each section. You’ll notice in the bottle if you shake it, you’ll see all the foam, but after 30-60 seconds it will be gone. This is so it doesn’t leave any foamy residue behind once wiped and means it can be used on every surface including glass! Hope this helps. Give it another try that way in the areas you want some foam and I think you’ll like it more!
@atouchofhutchad5 ай бұрын
Thank you so much for the suggestions! I will absolutely do this!
@stevenv92245 ай бұрын
Great info on that 💪🏼
@stevenv92245 ай бұрын
I have the same issue about foaming. 2 things I was told 1 I have to shake the bottle and put good amount on the brush. And 2 I might have to get a better brush like a boar hair. If you check out ECDetail. On Eddie review it foam like crazy. I love the way it cleans
@atouchofhutchad5 ай бұрын
I’ll keep this things in mind, I appreciate it! I do love how it cleans, it will stay in my arsenal for sure.
@armourdetailsupply5 ай бұрын
THIS^ need to shake the bottle and spray directly into the brush. It’s not an APC and won’t foam like one.
@stevenv92245 ай бұрын
@@armourdetailsupply gotcha either way it does a great job and am happy how it cleans
@atouchofhutchad5 ай бұрын
I will do this in the future! Thank you!
@atouchofhutchad5 ай бұрын
I loved it too!
@LV_UA75 ай бұрын
Awesome video dude can’t wait for summer to do all this on my TLS 🤟