10 ай бұрын
Пікірлер
@4pumas 7 күн бұрын
Красава
@lightworkz61 2 күн бұрын
Thank you 😊 🙏
@mohammadrazanayel2542 8 күн бұрын
super
@lightworkz61 8 күн бұрын
Hi & thanks for the comment ;)
@johnnyceeuontheroad.2389 13 күн бұрын
Good video, ive been looking at this video for over 2 weeks and i can't get my mirror to come out like yours, i have a LONGER ray 5 20w, im using lightburn please help 😢😢
@lightworkz61 12 күн бұрын
Hi and thanks for the comment, OMG you must have watched this soooooo many times then, ok first off, I use very cheap mirrors, the silver coating on the back is very thin and don't require a lot of power to remove it ;) so depending on the quality of your mirror will give different results, go find the cheapest mirror and do some testing mate, I can't see any other reason than that to be honest with you, well apart from the way your image is processed, if you would like to give me your email I will send you this lightburn file with all the settings and the image ready to go, for you to try it out ;) Thanks.
@ainttakenanyshit 20 күн бұрын
A new fiber user here.... Thanks for sharing the settings which is a good place to start with my 30 watter. My kitchen table has a Longer B1/30 to do all the cutting and next to it is my fiber. This fiber stuff is great $HIT with the speed and .01 mm precision. Made a nice USMC engrave on a brass coin for my brother and it came out EXCELLENT... (Commarker B4/30 watt not a MOPA - BUT "next time :-)", 1500 mm/sec at 90% power, - 25 kHz, 6 passes with a 15' rotation then a sub layer of 2 cleanup passes with a 90' rotation - 60kHz, globally repeated 14 times. (main burn 6 passes then 2 clean passes - the globally repeated 14 times).... ALL burns were .025 line interval - 1016 DPI.... Gotta run a couple of cleanup passes every 6 main burn passes or so to have a "clean" surface to burn another 6 passes. The final depth was just under a mm.... THESE ARE THE COINS TO BUY - ASIN B0CN32GG14... At 10 for 20 bucks is a good deal AND they measure a true 3 mm thick/40 mm diameter. The other big "A" coins are only ~ 2.2 mm thick and that asin number is the REAL DEAL.... So good, after my first order and checked them out, I bought 30 more.. 🙂 HAPPY BURNING.... Hank
@lightworkz61 11 күн бұрын
Hi Hank, many thanks for the comment. Wow you got a nice setup mate ;) yeah fiber is bloody amazing, I have just upgraded my 20w laser to a 30w still waiting for the parts to arrive from China ;( not really into coins that much but have had a play or two ;) and yep, it's damn cool what can be done with a fiber ;) ok have lots of fun mate... Adrian.
@misterhmida2959 21 күн бұрын
Paramètres ?
@Idolindo 23 күн бұрын
Energy always has an origin. People have to stop believing that there is such a thing as a free lunch.
@lightworkz61 22 күн бұрын
Yep, and I totally agree with you, but it was just a test using Lightwave 3D bullet dynamics ;)
@user-dm9nn9ul7u 26 күн бұрын
Deberían suprimir la musica
@josephaldeguer9079 Ай бұрын
what's the benefit of having the scan angle at 90? thanks!
@lightworkz61 Ай бұрын
Hi & thanks for the comment ;) ok the laser beam is not square, it's a rectangle (.1 x .08), so by changing to 90 degrees it uses the narrow part of the beam, this gives a finer line spacing = better detail ;) I hope this has helped.
@josephaldeguer9079 Ай бұрын
@@lightworkz61 thanks for that! will try that on my next test.
@merinoperezkarlablessy970 Ай бұрын
How long did it take you to record on that piece?
@lightworkz61 Ай бұрын
Hi & thanks for the comment, this took 2hrs 19mins to finish.
@genabush4619 2 ай бұрын
Very nice! Wattage? Settings?
@lightworkz61 2 ай бұрын
Hi & thanks, my settings are in the description, many thanks for the comment ;)
@genabush4619 2 ай бұрын
. I see the wattage is 20 but I'm sorry, I don't see the speed or power. I'll check again
@lightworkz61 2 ай бұрын
@@genabush4619 click on the more button of my description under the video screen, you will find the full details there. Better if I just give you them here ;) Lightburn settings: image: Dpi=254 Speed=6500 Power=45 - vector: Speed=7000 power=40 Enjoy ;)
@genabush4619 2 ай бұрын
@@lightworkz61 thank you!!
@JWRe 2 ай бұрын
Hey great video, just watched it and applied the settings for me. I’ve noticed the 4th marking pass for me works at 100mm speed, 62 power, 20khz, and 0.003 hatch
@lightworkz61 2 ай бұрын
Thanks mate, I happy that my vid helped you out a bit, we are all here to help each other and we all start from knowing nothing, and we all need a little help from time to time ;) so many people have helped me over the past 2yrs, Facebook laser groups are an amazing place to find friends and lots of help, so now go burn some stuff ;) Thanks for the comment.
@JWRe 2 ай бұрын
Hey, does the Tio2 work for stainless steel? I’m trying to get deep black engravings
@lightworkz61 2 ай бұрын
Hi & thanks, yes you can use tio2 on stainless steel, but if using a fiber laser the best way is to do a clean up pass then do the black pass, if using a diode use a black marker first and go slow and hot ;) to be honest tio2 doesn't really help that much to get a dark burn. Thanks for the comment.
@JWRe 2 ай бұрын
@@lightworkz61 Right okay, yes so I’ve got a fiber laser, I’ve not used the clean->black pass, will give it a try. Is it necessary to clean the debris off after doing the clean pass? Might need to clamp the jewellery down
@lightworkz61 2 ай бұрын
@@JWRe Hi, no need to clean debris after the clean pass, watch my BBQ vid kzfaq.info/get/bejne/qsuopZZqq8iUgas.html to see how I done it ;) Thanks for the comment.
@wsparry1066 2 ай бұрын
Excellent work, how did you process the image also how long did it take to engrave please
@lightworkz61 2 ай бұрын
Hi & thanks. This took 1hr 39seconds to engrave, I made all the image processing in photoshop, adjusting contrast, gamma & a little sharpening ;) to be honest it all could have been done in Lightburn. I also sprayed the slate with a matt black paint before engraving to help achieve a better contrast on the slate. Many thanks for the comment.
@ternumapotropaic2395 2 ай бұрын
Genuinely looking for something like this… does it come with a rotating plate? How fast can it engrave a pot for example the one in the video? Thanks 🙏
@lightworkz61 2 ай бұрын
Hi & thanks, I used the Ortur Laser Master 3 LE with the 10w laser module & a rotary chuck, all of this can be found here: ortur.net/en-eu The rotating plate is something I picked up from a local store it is not need for the engraving process only to display ;) The time for this 360-degree engraving was about 5 minutes in total, I hope this has helped. Thanks for the comment.
@cathello2900 2 ай бұрын
He's a very expensive laser like that.😢😢😭
@lightworkz61 2 ай бұрын
Hi & thanks, to be honest my fiber laser is only a 20w and it not really that expensive, this one was only $1,300 not much more than a good diode laser. Thanks for the comment.
@cathello2900 2 ай бұрын
Hi and thanks, it's cool. I didn't really understand it a bit. this is a ceramic tile. and you just sprayed it with white tio2?
@lightworkz61 2 ай бұрын
Hi & thanks, yes it's a white ceramic tile and sprayed with a mixture of Tio2 & thinners, just a light coating, to take away the shine from the tile, the Tio2 will let the laser beam burn into the ceramic coating and make a permanent mark on the tile ;) many thanks for the comment.
@craiggardner2148 2 ай бұрын
Is this bare tile or is there something on it before you use the laser?
@lightworkz61 2 ай бұрын
Hi & thanks, First I sprayed the tile with Tio2 mixed with thinners. Thanks for the comment.
@craiggardner2148 2 ай бұрын
@@lightworkz61 what do you use to apply the Tio2?
@lightworkz61 2 ай бұрын
@@craiggardner2148 Hi, I use a mini compressor with a mini spray gun (not an airbrush) as the airbrush gets clogged up very easily, I did start off with a small pump action spray bottle, like the ones for spraying flower in the home, this was ok, but I get a much smoother coverage with the spray gun ;) Thanks for the comment.
@craiggardner2148 2 ай бұрын
@@lightworkz61 Thank you
@SAQ1 2 ай бұрын
I like it svg for fox where i can download? Pls link
@lightworkz61 2 ай бұрын
Hi & thanks, sorry but I only have it as a .jpg if you give me your email, I will send it to ya ;)
@larrys_truth 2 ай бұрын
worked great,thank you
@lightworkz61 2 ай бұрын
Hi & thanks, I'm happy that my vid helped, I just subbed ya ;) many thanks for the comment my friend.
@BigCaboose703 3 ай бұрын
I wish youtube had recommended this video to me 5 hours ago, when I painstakingly traced the outline of a cat... At least I'll know for next time. Thank you!
@lightworkz61 3 ай бұрын
Hi & thanks, sorry about that my friend, but I'm happy that you found it helpful for the next time, many thanks for the comment.
@maritimemodelboatworks23 3 ай бұрын
This is very nice! I have a 20w foxalien, what is good speed in mm/s? And % power?
@lightworkz61 3 ай бұрын
Hi & thanks ;) This was done on the Ortur 20w at mm/m, so the settings will be the same as mine in the video at 01:07 just change the speed to 116.67 for mm/s power still the same 45 ;) Thanks for the comment.
@mortenolesen7761 3 ай бұрын
Nice bright white. What settings do you use to get it so white?
@lightworkz61 3 ай бұрын
Hi & thanks ;) for this photo I took the grayscale level down from 256 shades to 128 shades, then bumped up the brightness & contrast, then played with the gamma to bring back the blacks ;) but to be honest it doesn't work so well with most other pictures, guess I got lucky with this and the guitar one as well :) 20w Fiber laser - Lightburn: Speed=300 Power=70 Frequency=20 Angle=90 DPI=318 Many thanks for the comment.
@ainttakenanyshit 3 ай бұрын
Looks GRATE... What laser did you use for this video?? Thanks in advance.. Approx cost?
@lightworkz61 3 ай бұрын
Hi & thanks ;) I used a 20w fiber laser that I bought from Mr. Dustin Li. www.ettechlaser.com/ you can get this same laser I used for $999, excellent quality and works great ;) Many thanks for your comment.
@johndavis3894 3 ай бұрын
Excellent project. It's motivation for sure. Where did you get the mirror, and what specific mirror did you use?
@lightworkz61 3 ай бұрын
Hi & thanks ;) the mirror is just a standard cheap 30x20cm x 3mm thick mirror that I bought from Jumbo here in Cyprus, a pack of four was just €5, many thanks for the comment.
@pop-popmoose5359 3 ай бұрын
How easy/difficult was connecting the LM3 to the XTool rotary?
@lightworkz61 3 ай бұрын
It was very easy mate, the Xtool RA2 Pro rotary comes with an extension cable that fit's straight into the socket at the back of the LM3, 2 mins and it's done, my rotation settings are (128mm per rotation) works perfectly and very accurate, I hope this has helped, many thanks for the comment ;)
@pop-popmoose5359 3 ай бұрын
@@lightworkz61 My RA2 Pro didn't come with the cable. I've reached out to XTool but haven't heard back yet.
@lightworkz61 3 ай бұрын
@@pop-popmoose5359 That's not good ;( I hope they get back to ya soon mate, to be honest mate I wished that I had waited the extra 2 months and bought the Ortur version as the chuck can be rotated up and down ;( but I didn't know at the time that Ortur was going to produce a rotary.
@Dekweekschuur 3 ай бұрын
Nice, i wanna test it im missing the frequency setting ant the [Q-pulse if you have it, otherwise its 200ns]
@lightworkz61 3 ай бұрын
Hi & thanks, the first layer was frequency=20 second layer was frequency=30, I don't have a Q-pulse, so yep 200ns ;( I just noticed that in the vid I must have done the lightburn screen grab when I had my 20w diode selected and not the 20w fiber ;( stupid me, but the rest of the settings in the vid are correct, sorry about that.
@peterlepine 3 ай бұрын
Thank you for this video. Nicely explained and easy to follow along. Great job. I used this method to create an outline as per the video and then exported the design as an SVG. I then converted the SVE to an STL file to print om a 3D Printer.
@lightworkz61 3 ай бұрын
Hi & thanks ;) cool idea mate, I'm happy to hear that my vid helped you ;) many thanks for the comment. Happy 3D printing.
@user-gh8tw1sv7o 3 ай бұрын
what speed and power?
@lightworkz61 3 ай бұрын
Hi & thanks for the comment, I made this a long long time ago, I have tried to find the lightburn file but sorry I don't have it anymore, I can have a guess and say speed=2000 Power=60 Dpi-317 I was using my old Ortur 10w ;) LM3 LE machine.
@robertdutton6110 4 ай бұрын
Nice work I love them
@lightworkz61 3 ай бұрын
Thanks buddy ;)
@MilanMica 4 ай бұрын
Super !!!! Black spray ?
@lightworkz61 4 ай бұрын
Hi & thanks, yes sprayed with matt black paint, then after engraving give it two good heavy coats of clear coat to seal the paint ;) Thanks for the comment.
@dominikpierog2365 2 ай бұрын
Standard Black oven painted glass
@7199233 4 ай бұрын
Saludos amigo muy buen trabajo, hace un mes me llego el equipo láser G2 20W y estoy aprendiendo haciendo pruebas
@lightworkz61 4 ай бұрын
Hi & thank you, it is difficult to start with a fiber laser, adjusting the settings will drive you crazy ;) but you will work it out with testing many times, be patient and keep trying, it's amazing what can be made with a laser ;) enjoy and thanks for the comment.
@brookhugginson8687 4 ай бұрын
🤗 Promo*SM
@matiassalute4110 4 ай бұрын
So cool🎉
@lightworkz61 4 ай бұрын
Thank you ;)
@SINANOZYOLDAS 4 ай бұрын
Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs about angular continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will take firm steps with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet. 98% of the published videos are wrong and do not work. I know the mistake they all make.
@lightworkz61 4 ай бұрын
I really wish I could help you out, but unfortunately I'm not financially stable ;( I wish you much luck in finding someone to back your projects.
@SINANOZYOLDAS 4 ай бұрын
@@lightworkz61I want to create a clean energy system for a cleaner world. No mechanical wheel system whose angle does not change can produce energy. No system will work against the laws of physics. You can promote this project in your country. I want to realise this project and get a worldwide patent. Of course, I need a solid and idealistic investor to realise these works. I convert angular energy into mechanical and electrical energy. I am an inventor. I am ready to realise this project in any country that will support me. Thank you.
@mrSanders. 4 ай бұрын
hi, good job. what paint was used?
@lightworkz61 4 ай бұрын
Hi & thanks. Matt high heat resistant spray paint, made by CosmosLac. Thanks for the comment ;)
@Desert_Woodworker 4 ай бұрын
thx
@lightworkz61 4 ай бұрын
Welcome & thanks for the comment ;)
@SerialPyro 4 ай бұрын
Amazing work! If you don't mind me asking what is the wattage of your laser?
@lightworkz61 4 ай бұрын
Hi & thanks :) this was made using the 10w module, thanks for the comment :)
@wsparry1066 4 ай бұрын
Really nice work you are doing,how do you edit/prep your work please
@lightworkz61 4 ай бұрын
Hi & thank you ;) I use Gigapixel AI to resize the image, then photoshop to reduce the greyscale level from 256 down to 128 levels which I find is best for slate, then I adjust curves, levels and gamma, then in Lightburn I give some sharpening, that's about it really, but every image is different, and it all depends on the image quality and what material you are engraving on ;) I hope this helps. Thanks.
@mrSanders. 5 ай бұрын
Hello. I noticed that you sometimes use settings with 100% power. advice, do not do this, do a maximum of 90% power. There are empirical observations that when using 100% power, the laser resource can be greatly reduced
@lightworkz61 5 ай бұрын
Ok, many thanks for the info my friend ;)
@user-ws2ll7xp1r 5 ай бұрын
Looks fantastic
@lightworkz61 5 ай бұрын
Thank you ;)
@Fancylooks 5 ай бұрын
Impresive!
@lightworkz61 5 ай бұрын
Thank you ;)
@sunset010101 5 ай бұрын
Are the settings you used for the 10W Ortur LM3 or the new 20W version?
@lightworkz61 5 ай бұрын
Hi & thanks. This was done using the LM3 10w version, thanks for the comment ;)
@TayDavis7276 5 ай бұрын
👏 great job
@lightworkz61 5 ай бұрын
Thank you ;)
@patriciodesouzasilva317 5 ай бұрын
great work
@lightworkz61 5 ай бұрын
Hi & Thank you ;)
@patriciodesouzasilva317 5 ай бұрын
@@lightworkz61 Please, did you use the laser pics image? original or prepared?
@lightworkz61 5 ай бұрын
@@patriciodesouzasilva317 Hi, I think I made the image using Bing AI, but I'm not 100% sure about that, as I make so many AI images, but I always use Photoshop to adjust my images, then hit the burn button ;)
@frankfrati4 5 ай бұрын
Is that real time?
@lightworkz61 5 ай бұрын
Hi & thanks for the comment, NOT real time, it took just a little over 3 minutes from start to finish ;) had to speed up the vid to keep the under 1 minute rule for shorts on KZfaq ;) Thanks.
@chicodog0478 5 ай бұрын
I have received my 100 w from Dustin I found him through tour videos I am enjoying watching there is a big learning curve.
@lightworkz61 5 ай бұрын
Hi & Thanks for the comment, WOW 100w that's cooking mate, yep it will take time, it was driving me mad for the first 2/3 weeks and still does on occasions ;) but when you get your head around it, you will LOVE it, I'm sure ;) Dustin is a real nice guy and sooooo helpful, ok mate have fun, if I can help in anyway just drop me a msg. Thanks.
@thetinkerverse 5 ай бұрын
Nicely done. People don't experiment enough with the trace feature and it's very powerful.
@lightworkz61 5 ай бұрын
Hi & Thanks ;) Yeah Lightburn trace is amazing, I have even designed some parts for an underwater scooter handlebar to be made from acrylic, it had to be exactly same size and was full of curves, after I made the outline in Lightburn, I exported it as .dxf into my 3D softwave, extruded it and sent it off to be manufactured, worked out great ;)
@chicodog0478 5 ай бұрын
Very nice work i have been watching your work. I have ordered a laser from Dustin.
@lightworkz61 5 ай бұрын
Hi & thanks, WOW that's cool, hey Dustin is a good guy, he will look after you my friend, the laser I got is very high quality and is working great as you can see, hey you will have lots of fun when you get it, what size did you get? mine is just a 20w but it's real powerful ;) Thanks for the comment.
@mrSanders. 5 ай бұрын
@@lightworkz61 you can engrave my design black on stainless steel. small size, I have a problem with it and I don’t understand why
@chicodog0478 5 ай бұрын
I have 100 w@@lightworkz61
@lightworkz61 5 ай бұрын
Hi & thanks, so you want me to engrave your logo on stainless steel, no problem my friend, but if you want to receive it, how do I send it to you, I live in sunny Cyprus EU ;) if you just want me to test your design on stainless steel, yes for sure I will give it a go for you ;) you can email it to me. [email protected] (don't worry no charge) ;)
@mrSanders. 5 ай бұрын
@@lightworkz61 I wrote to you by email. just test))
@robertdutton6110 5 ай бұрын
Very nice the natural lines on the slate adds to the picture
@lightworkz61 5 ай бұрын
Ahhhh thanks buddy, it was an old piece of used slate, slightly rubbed down, you can still see the old test engravings around the edge ;)
@nandostella9734 6 ай бұрын
Thank you, I got cresy find to work on one of it
@lightworkz61 6 ай бұрын
You're welcome, I hope it help you ;)